Used Stainless Steel for sale (18,089)

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Click on the link below to see a video of the machine running. Dkedpfsxgft Hjx Afzou

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: stainless steel with rubber coating, diameter 300 mm -Transport width: 1007 mm -Shaft: Ø90 mm, dimensions see photos -Quantity: 1 piece available Dksdsvn N Ubjpfx Afzju -Dimensions total: Ø 300 x 1855 mm -Weight: 273 kg

Condition: used, Stainless Steel Vibrating Feeder with Hopper. Hopper is 80x 60 cm on the top. Feeding pan is 80 cm long and 30 cm wide. Dksdpfx Aoun I Nyofzeu

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For clean components in continuous operation Continuous-flow cleaning system made of stainless steel, equipped with an oil separator for uninterrupted material throughput. The workpieces are conveyed continuously—or in a clocked manner, if required—through successive treatment zones. Cleaning is performed as the parts pass through fixed nozzle systems. Suitable for parts with dimensions approx. 400 x 100 mm A wire link chain conveyor transports the components through the cleaning system, either lying flat or standing. • Surrounding nozzle frame – the offset nozzle arrangement enables thorough, all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle frames and nozzles can be adapted to suit the parts • Usable dimensions, load capacities, and pump performance can be customized The process steps are carried out in successive treatment zones: • Spray cleaning with sequential wet-treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volumes: Washing tank: 800 liters Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Pump, washing tank: 3.0 kW Pump, rinsing tank: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel drip pans for spill protection. These are included in the price and will be supplied with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE Dedpfx Aoxcun Eofzeku

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Djdpeicnicjfx Afzoku Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: excellent (used), Duchting Pump Rowa 600.85 Q - 4900 m3/h Dksdexfwumjpfx Afzou h - 23 m Spiral casing material: 1.4517

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Dkedsxgftyopfx Afzou Specifications: Capacity: 200 L Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar

Condition: used, New: No Empty weight: 10 kg Part suitable for: trucks Article nr.: Z99999079-veiling Used Stainless steel chimney 2m dia 300mm Dkodpfjxhy Nfex Afzsu

Condition: ready for operation (used), 1800 liter APV stainless steel jacketed cooking vessel, with homogeniser. Approx. diameter 1.5 m. Approx. tank height 1.2 m. Overall height approx. 1.6 m. Dsdpfjr Elwnjx Afzjku

Year of construction: 2002, condition: used, Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Dodsxhfkuspfx Afzoku Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Year of construction: 2020, condition: excellent (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 112JM/31/4/6/223S D160L -Power: 15 kW 1465 rpm -Number: 3x fan available Dedpfx Asxd Tr Ssfzeku -Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/piece

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS - Conical bottom tank on legs - Material: stainless steel - Capacity: 27,800 litres - Brand: PROGRESSO ROOF - 1 off-centre chimney with hatch RING - 1 rectangular door opening outwards at the bottom of the ring - 1 tasting tap - 1 partial drain valve on square flange BOTTOM - Conical - 1 total drain valve - On legs DIMENSIONS Dedpfxsw Tl Npo Afzeku - Diameter: 3,200 mm - Height: 4900 mm - Weight: 2,800 kg

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel masticator blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. Dksdpsxgfttofx Afzju This unit is ready to run. A video of this mixer is available below.

Condition: used, New: Yes Empty weight: 1 kg Part suitable for: trucks Article nr.: 31101321-veiling Dkodpoxhigasfx Afzju 10 pack stainless steel socket caps 32mm

Condition: excellent (used), 4kw, all stainless steel construction with built in inverter. Dedjwdx Hdjpfx Afzjku

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Specifications: Dodoxgftmepfx Afzoku Motor Power: 20.1 hp

Condition: used, New: Yes Part suitable for: trucks Type number: 31101421 Dkedpfx Asxhh N Hofzsu OEM : 31101421 Article nr.: 31101421-veiling 10 pack stainless steel socket caps 33mm

Year of construction: 2003, condition: refurbished (used), With CIP, Vacuum Transfer System and Control System. Dsdpfx Afowfhutozjku Material: Stainless steel (316) Capacity: 400 litre (Product Dependent) Mixing Chamber: 1,300mm Long x 800mm Diameter Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve Type Of Blades: T-Arm Blades Motor: 22kW SEW Geared Motor Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor.

Condition: used, Used Aeromatic model MP1 stainless steel fluid bed dryer. The stainless steel filter chamber has an approximate capacity of 16 litres with a maximum product volume of 13.5 litres; it is hinge-mounted and removable. Operating pressure is 6 bar. Driven by a 3.3 kW 3-phase, 50 Hz supply. Reportedly, the minimum batch weight is 400 g and the maximum batch weight is 6 kg. Dksdpfxjxgfrvj Afzeu

Condition: used, Used GUEDU stainless steel mixer Type 90 NO PO Total volume 90 litre Agitated at the bottom of the vessel 2 blades in " s " Motor 5.5 kw – Hp 7.5 – 3x 220/380 volts Dkjdpfsxgfvzox Afzou 6 x 2 blades lump breaker Motor 1.1 kw – Hp 1.5 – Rpm 1500 – 3x 220/380 volts Double jacket on vessel and cover

Condition: used, Used Netzsch model PMD Pharma 50 stainless steel pre-mix disperser approximately 50 litre working capacity. Jacketed chamber with mechanical seal. Has welded conical bottom and bolted dished top heads. Unit has top entry stainless steel agitator driven by a 15kw 3/50 2900rpm motor. Includes hydraulic powerpack driven by a 1.1kw 3/50 1415rpm motor for agitator raise and lower. Has bottom entry stainless steel scraped surface agitator driven by a 1.35kw 3/50 142-1420rpm motor. Dsdpjxgfvhsfx Afzsku

Condition: used, Comprehensively tested, used Gardner type approximately 400 litre working capacity (product dependent) stainless steel ribbon blender. Trough measures approximately 1650mm long x 550mm wide x 700mm deep. Unit has a stainless steel lid and includes a bottom discharge valve. Specifications: Capacity: 14.1 ft³ Material of construction: stainless steel Width: 21.65" Length: 64.96" Dimensions: 64.96 x 21.65 x 27.56 Dsdpexdw Iqsfx Afzsku

Condition: used, Used BCH stainless steel jacketed sigma mixer / extruder. Approximate working capacity 100 litre (product dependent) with maximum total capacity 250 litre. 304 Stainless steel mixing chamber measures approximately 720mm Long x 780mm Wide x 700mm Deep. Internal rated 100 mbar (90% Vacuum) design pressure at 150 deg.c. External 304 stainless steel jacket rated 6.8 bar design pressure at 170 deg.c. Has (2) 304 stainless steel Sigma blades driven by (2) 4kw motors with gearboxes. 304 Stainless steel screw discharge driven by 4kw motor with gearbox. Unit air operated hinged lid. Includes control panel. Dkedpfx Afoxdw Ikezou

Condition: used, Used JetPharma Model MC JetMill50 stainless steel mobile jet mill. Process gas maximum pressure 12 bar at 0 to 50 deg.c. Mounted on stainless stand. Specifications: Dodpfsxdw H Tjx Afzeku Grinding Air Pressure: 174 PSI

Condition: used, Used Sussmeyer Model HM10EHP-1L Stainless Steel Bead Mill Dodpfx Aoxdw Nuefzjku Click on the link below to see a video of the machine running.