Frequency-controlled stainless steel conveyor belt

unbekannt 7160 x 770 mm

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. Kedpfju R Rtbox Ah Njdg The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2010, Touch screen control for adjusting work groups Panel height mm from 10 to 50 Solid wood 12 mm Pvc/Abs mm from 0.4 up to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Working height adjustable electronically by C.N. Kjdpopzfcgefx Ah Nodg Motorized rubberized belt with superior pressure Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with two motors of 1.5 KW each Reel holder plate COMBIMELT gluing unit for hot melt glue with automatic dosing VarioMelt with pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Gleaning unit with 2 motors Rounding unit Edge scraper unit Installed power KW 13.7 Machine length mm 6170 approx TECHNICAL DETAILS TO BE CHECKED

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Kjdpfx Ahjidqpho Njdg Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: new, Year of construction: 2025, machine/vehicle number: 526969342, Gasparin jaw crusher GI129CV Everest mobile jaw crusher on crawler track 55 ton machine with extremely robust crusher and exceedingly high potential. It is characterized by the robust construction in all its parts and is certainly the best answer to the most heaviest applications. Equipped with Grizzly vibratory feeder (GI129C) it is suitable for more traditional applications, with Vibratory feeder and pre-screen, on the other hand, the machine (GI129CV) is suitable for arduous operations with high fines content and high material moisture. Equipped as standard with the patented HCS system (Hydraulic Crushing System), EVEREST is the best answer to quarry requirements. Production capacity: approx. 430 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. Gap hydraulically adjustable even during crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Jaw crusher 1150 x 850 mm crushing gap from 75 to 200 mm feed hopper 7 m³ - 2850 x 4960 mm two-deck vibrating screen 1170 x 2000 mm Main conveyor belt 1100 x 10000 mm 4 cylinder constant speed diesel engine 82 HP/60 KW , exhaust gas stage V Control panel chain drive 500 x 3900 mm Weight: kg transport length 12950 mm Transport width:3000 mm Kdodjhd I Siepfx Ah Neg Transport height 3400 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, functionality: fully functional, machine/vehicle number: B11401278, Year of construction: 2020, operating hours: 15,700 h, load capacity: 42,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,600 mm, power: 256 kW (348.06 HP), empty load weight: 67,200 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B11401278 Mast type: Telescopic Transmission: ZF5WG261 Condition: Ready to use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 18.00-25 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 18.00-25 Kdsdpfx Aev Sv Troh Nsg Rear tires condition: 80 - 100% Description: Very good running and working condition. Sideshift, Full cab, air conditioning, Central lubrication, 30' auto stop, air-conditioned movable cabin, 2 cameras (front and rear), 6 x new tires

Condition: excellent (used), Year of construction: 2014, Vacuum unit for e.g. manipulator, Dalmec - used - : Price (net), ex location: only €995 Manufacturer: dalmec Type: vacuum lifter Year of manufacture: 2014 Code: 85.16.0991 Kedpjvzli Iefx Ah Nsdg Load capacity: 7kg. Operating pressure: 0.60Mpa With this unit, plastic stacking boxes with external dimensions (LxWxH): 1,190 x 610 x 420mm filled with cable harnesses were lifted (see photos below) Condition: very good Available: immediately Location: Emden, later warehouse Frankenberg / Saxony

Condition: new, Attachment suited for: Construction machines Kjdpfjpa Rtiox Ah Njdg Sorting(sceleton) buckets for every machine/model For detailed information please contact us

Condition: new, Year of construction: 2025, machine/vehicle number: 857226635, Gasparin jaw crusher GI107C VESUVIO mobile jaw crusher on crawler track The GI107 VESUVIO mobile crusher stands for versatility and can be designed in two different configurations. Equipped with a Grizzly vibratory feeder (GI107C), it is suitable for more traditional applications. Vibratory feeder and pre-screen, on the other hand, the machine (GI107CV) is suitable for arduous applications with high fines content and high material moisture. Equipped as standard with the patented HCS system (Hydraulic Crushing System), VESUVIO is the best answer to the requirements of professionals and rental companies. Production capacity: approx. 300 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during crushing operation fast blocking system with wedges and folding cylinders unloading height 3000 mm dust extraction system tank pump magnetic separator warranty 1 year to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 1020 x 700 mm crushing gap from 45 to 180 mm Feed hopper 5m³ - 2000 x 3960 mm grizzly feeder 970 x 3600 mm Main conveyor belt 800 x 9600 mm 4 cylinder constant speed diesel engine 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 3310 mm Weight: kg transport length 12900 mm Transport width:2530 mm Ksdpfx Ahjhd I Rwj Njdg Transport height 3200 mm Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: like new (used), Year of construction: 2007, operating hours: 50 h, Complet with arm Kdjdpsufghzjfx Ah Njg

Year of construction: 1970, operating hours: 1,433 h, condition: excellent (used), For sale is an emergency generator from MWM with 250KVA The emergency generator runs on diesel. The complete genset stands in a 20-foot container Kdedoua Ai Depfx Ah Neg The emergency power generator has 1433std. kVA250 Weight approx. 9000 kg Dimensions 6100x2450x2600 mm