Used Stage for sale (2,816)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. Gkodpfxjzzpb Rs Ak Ueb - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: used, gearing type: automatic, lifting height: 44,000 mm, Year of construction: 2018, operating hours: 4,093 h, Sennebogen 673e Crawler Telescopic Crane Year of manufacture: 2018 Operating hours: 4,093 h Lifting height including boom: 44 m (36 m + 8 m) Lateral reach: 38.5 m Pick & Carry with up to 100% of rated load Incl. folding jib 8,000 mm (can be mounted without auxiliary equipment) Adjustable undercarriage up to 4,800 mm (transport width: 2,980 mm) Electro-hydraulic emergency power unit Radio remote control Radio Programmable work area limitation Tiltable cab up to 20° Rear and side cameras Diesel heater Fuel transfer pump Air conditioning Central lubrication system Engine: Cummins B6.7 [168 kW/228 hp] Stage 5 Total weight: 71,500 kg Gjdpfezg Abhox Ak Uskb Undercarriage ballast: 8 tons Rear ballast: 17.8 tons Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. You can find further information on our website. Errors and prior sale are subject to change! Cab, rental possible = Further information = Engine brand: Diesel Lifting capacity: 70,000 kg Please contact Tobias Ebert for more information.

Condition: excellent (used), power: 50 kW (67.98 HP), fuel type: diesel, color: other, lifting height: 3,020 mm, Year of construction: 2022, operating hours: 1,035 h, Empty weight: 3.664 kg Dimensions (LxBxH): 337 x 173 x 198 cm Steering: skid steer Engine type: Bobcat DM02VB CE mark: yes Technical condition: very good Gkodpoz Ad Arofx Ak Ujb Visual appearance: good = Additional options and accessories = - 3rd hydr. circuit - Blower - Rubber tracks = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Czech republic

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 400 kg, electrical fuse: 16 A, Suitable for all types of dough. Reliable machine. Two-stage spiral mixer. Bowl and kneading mechanism are made of stainless steel. - Stainless steel base and spiral, - Power: 5 kW; Power supply: 400 V, Godpszv Ik Tefx Ak Uokb - Max. flour capacity: 100 kg, - Max. dough capacity: 160 kg, - 2 speeds; 2 timers, - Electromechanical control panel, - Automatic transition from the first to the second speed Delivery not included in the price.

Condition: used, For sale is an excellently maintained Nagema cutter (40 liters). Completely made of stainless steel. Newly sharpened blades. Two-stage mixing function. Two blade speeds. Two mixing speeds for the container. Temperature and container speed display. Gedpezn I Ebefx Ak Uokb Testing possible before purchase. Can easily handle three 25-amp fuses.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: Gjdpfxey Sw I Nj Ak Uokb ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,720 h, power: 38 kW (51.67 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 15,720 mm, lifting power: 227 kg/m, platform length: 2,440 mm, platform width: 760 mm, overall weight: 6,709 kg, transport length: 8,480 mm, transport width: 2,240 mm, transport height: 2,490 mm, construction height: 2,490 mm, fuel type: diesel, fuel consumption per hour: 4.5 l/h, fuel tank capacity: 76 l, tire size: 12-16.5 NHS (Ruw terrein), tire condition: 75 %, wheelbase: 2,200 mm, ground clearance: 320 mm, color: blue, Equipment: UVV, all wheel drive, === MAIN SPECIFICATIONS === Year of manufacture: 2013 Operating hours: 2,720 h Working height: 15.72 m Max. horizontal outreach: 11.18 m Platform capacity: 227 kg Platform dimensions (L x W): 2440 x 760 mm Platform rotation: Yes, 160° Upper structure rotation: 360° continuous Boom type: Telescopic Jib: Yes (articulating jib ±135°) Drive type: Diesel Four-wheel drive: Yes (4x4) Stabilisers: No Gksdpfx Aexct I Rsk Usb Tyres: Rough terrain, air-filled Engine manufacturer: Perkins 404D-22, 38 kW (51 hp) Emission class: Stage IIIA Weight: 6,709 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with full maintenance history CE-certified with complete documentation Fully inspected and ready for immediate use Equipped with a powerful Perkins diesel engine and 4x4 drive Ideal for rough terrain and height work up to 15.7 m === CONDITION === In good working condition – fully inspected and tested by certified technicians. Clean appearance, engine and hydraulics in proper working order. On-site inspection possible upon request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery available Price € 22.000 (EXW / excl. VAT) The Genie S-45 is a robust telescopic boom lift with excellent terrain capability and smooth control. Powered by the reliable Perkins 404D-22 diesel engine, 4x4 drive, and a maximum working height of 15.7 m, this lift is ideal for construction, maintenance, and installation work at height. Fully CE-certified, technically inspected, and ready for immediate operation. Offered by Collé Rental & Sales – your trusted European partner for new and used access equipment. === DELIVERY === Crane loading available on request. Professional transport and export documentation handled by the logistics team of Collé Rental & Sales. Fast delivery within the EU and worldwide.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4NTV88BXIHR, overall weight: 848 kg, fuel type: diesel, tank capacity: 190 l, color: red, power: 16 kW (21.75 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 16 kW (21.75 HP), nominal power (apparent): 20 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 2,150 mm, total width: 1,040 mm, total height: 1,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, fuel consumption (combined): 3 l/100km, fuel consumption (urban): 3 l/100km, fuel consumption (extra-urban): 3 l/100km, fuel: diesel, fuel tank capacity: 190 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 380 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,550 mm, control cabinet length: 2,150 mm, control cabinet width: 1,040 mm, noise level: 65 dB, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 20 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage V. De efficiënte Yanmar motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 190 liter heeft de generator een autonomie van maximaal 48 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. ### Technische Specificaties: - Model: Bredenoord 20 KVA - Nom. vermogen: 20 KVA - Max. vermogen: 20 KVA - Motor: Yanmar 4TNV88BXIHR - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 20 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 65 dB(A) op 7 meter - Brandstoftank: 190 liter - Autonomie: - 100% PRP: 40 uur - 70% PRP: 56 uur - Motorvermogen: 16 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3,38 m x 1,03 m x 1,5 m - Gewicht: 848 kg - Emissieklasse: Stage V ### Brandstofverbruik: - 100% PRP: 4.7 L/h - 70% PRP: 3.42 L/h - 50% PRP: 2.3 L/h ### Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 20 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 500 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd Godpfxjv Rncio Ak Uokb - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: used, Year of construction: 2006, machine/vehicle number: 1799-260030, KNUTH WF 1 Universal Tool Milling Machine The KNUTH WF 1 is a compact universal tool milling machine for milling and drilling operations. In addition to the horizontal work table, the WF 1 has an additional vertical table, which provides a wide range of clamping and machining options. The vertical milling head can be swivelled by ±45° and has a manually adjustable quill with a stroke of 60 mm. Both spindles have a robust ISO 40 (SK40) tool holder. With travel distances of 300 x 200 x 350 mm, eight feed stages and separate speed ranges for horizontal and vertical machining, the machine offers high flexibility for a wide range of machining tasks. Technical data Gkedpszyy R Hofx Ak Uob Work table: 270 x 700 mm T-slot spacing: 50 mm Vertical table: 260 x 710 mm T-slots, vertical table: 2 x 12 mm Speed, horizontal: 110 – 1,230 rpm Speed, vertical: 150 – 1,660 rpm Quill travel, vertical: 60 mm Main motor: 3.0 kW Dimensions: 1,342 x 1,380 x 1,670 mm Net weight: approx. 900 kg

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch Gsdpfszktq Iex Ak Uekb GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: used, Year of construction: 2009, machine/vehicle number: SO144, Technical Specifications & Performance DataThe SIPA SFR 8 is a rotary PET stretch blow molding machine designed to form PET bottles from preforms for beverage production and industrial packaging applications. Manufactured in 2009, this machine provides a stated production capacity of 12,400 bottles per hour. Its rotary architecture supports continuous bottle production and is suitable for integration into a used bottling line where consistent container supply is required ahead of filling, capping, labeling and secondary packaging equipment.Manufacturer: SIPAModel: SFR 8Year of manufacture: 2009Production capacity: 12,400 bottles per hourBlow mold configuration: 4 mold sets with 8 cavities eachPreform neck finish: 28mm / 1881 short neckSupported bottle formats: 0.5L, 0.75L and 1.5LContainer material: PETAdvanced Automation & Control SystemsThis rotary stretch blow molder is intended for automated PET bottle manufacturing, transforming heated preforms into finished containers through the stretch-blow molding cycle. The supplied preform feeding system supports controlled preform handling into the machine. Rotary blow molding equipment is typically operated through coordinated process controls that synchronize preform transfer, heating, stretching and blowing stages.The machine is supplied with its preform feeding system and chiller. These components support a more complete blowing package by providing preform infeed capability and process cooling. The high-pressure compressor is excluded, so compressed-air infrastructure must be planned as part of installation and commissioning.Production Line Integration CapabilitiesThe SIPA SFR 8 can operate as the bottle production stage of a PET used bottling line. It is positioned upstream of filling monoblocks, labeling machines, shrink wrappers, handle applicators and palletizing systems, producing PET containers for onward handling in a beverage production line. The available mold sets provide flexibility for 0.5L, 0.75L and 1.5L bottle formats, subject to the installed mold and associated line setup.The supplied preform feeding system supports integration with preform handling equipment. A preform hopper is not included, allowing the buyer to configure a hopper solution according to site layout, autonomy requirements and preform logistics. The 28mm / 1881 short-neck finish should be matched with compatible preforms, closures and downstream filling equipment.Machine Condition & Maintenance HistoryThe machine is described as being in very good condition and regularly maintained by the manufacturer. It remains operational until September 30, 2026, indicating that it is currently in production rather than stored or decommissioned. This operating status gives prospective buyers the opportunity to evaluate the machine as part of an active production environment before dismantling.Planned dismantling and loading will follow the end of operation. Buyers should arrange site assessment, technical verification and transport planning in coordination with the removal schedule.Operational Performance & VersatilityDesigned specifically for PET bottle manufacture, the S... Gkjdpfoztwmfsx Ak Usb

Condition: new, operating hours: 8 h, functionality: fully functional, machine/vehicle number: #BC0Q000005, Equipment: documentation/manual, type plate available, For Sale: KEYENCE VL-770 3D Scanner We are offering for sale a professional KEYENCE VL-770 3D scanner, which was purchased in the Czech Republic directly from KEYENCE for our company’s needs (VAT excluded). This is a sale of company assets. Date of acquisition: 28.02.2025 Condition of the equipment: in exceptionally good condition, practically like new. Usage: the equipment was used very sparingly, only for a few short measurement tasks. Storage: the equipment was stored in a very clean and controlled environment within the R&D department at all times. Operational load: the scanner was not deployed in serial production; the equipment was used without any intensive or industrial load. Key advantage of this offer: it is an almost new piece of technology purchased directly from the manufacturer, offered at the price of used equipment, with no waiting times and without the need for further initial investments. Included in the package: • VL-770 Measurement head • VL-700 Controller • VL-730 300mm stage • VL-C33 Light shielding cover for 300mm stage • VL-A3E VL Series Software Set (English) Gsdpfxjzg Dpme Ak Uskb Price: • €27,000 excluding VAT If you are interested or would like more information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Gjdozbrz Iepfx Ak Ujkb Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 135 h, power: 55 kW (74.78 HP), motor manufacturer: Perkins, fuel type: diesel, first registration: 12/2022, color: red, overall weight: 3,350 kg, total height: 2,450 mm, total length: 3,500 mm, total width: 1,980 mm, machine/vehicle number: VBLA4T40020750413, Equipment: air conditioning, cabin, front power take-off, hydraulics, power shift gear, Compact, maneuverable – yet powerful and extensively equipped: Lindner Lintrac 75 LS – Financing options available. Engine: PERKINS Syncro 55 kW, 75 hp, 350 Nm 4 cylinders, 3600 cm³ Turbo-diesel engine Emission stage 5 Transmission: 15/16-speed ZF Steyr Power2 power shift transmission, 40 km/h Power take-off: load-sensing rear power take-off, 430/540/750/1000 rpm; front hydraulics with power take-off Top link with quick coupler, additional lift cylinder Hydraulics: Bosch Rexroth high-performance pump, separate oil circuit Gksdpfxjzb N Hns Ak Ujb Design fenders instead of rubber fenders, DAB+ radio, USB, Bluetooth Subject to prior sale – all information is non-binding. The accuracy and completeness of the information provided here are not guaranteed. Any warranty and/or liability is excluded. Deviations from the description above cannot be ruled out. We would like to point out that the subject of the purchase agreement will be exclusively the motor vehicle in its actual condition.

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782. Godozzvgaopfx Ak Uekb

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Gsdpfxjxp Eqks Ak Uokb Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: used, mileage: 558,000 km, power: 290 kW (394.29 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,980 mm, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 44 m³, loading space length: 7,760 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Orten SafeServer sliding tarpaulin body * Dekra-certified load securing system * Beverage transport certificate * Draught beer transport certificate * Chemical transport certificate (IBC) * Waste paper transport certificate * 4 rows of load securing * 2,500 kg D'hollandia tail lift * Cargo area dimensions: 7,700 x 2,480 x 2,300 mm * Liftable trailing axle * Retarder * Constant throttle * Cruise control * Heated seats * Air conditioning * Medium-height cab with 1 bed * Spoiler * Sun visor * Automatic transmission * Differential lock * Leaf/air suspension * Euro 6 * Bluetooth radio * Lane keeping assist together with tandem SafeServer trailer Gksdpfxszknw No Ak Usb * 18,000 kg * Payload 12,945 kg * 2,500 kg D'hollandia tail lift * Cargo area dimensions: 7,760 x 2,480 x 2,300 mm ---- Special equipment: Trailer brake 2-line, Audio system: CD radio (Bluetooth), Exhaust outlet downwards on the right, Battery 220 Ah, Compressed air connection in the cab, Suspension: Front springs 7.5 t, 1 leaf, Info display 10.4 cm with additional display, Fuel tank: 630 L aluminum, Air deflector on the roof (lockable), Engine brake reinforced, Trailing axle steered, liftable, Retarder, Switch for tail lift, Rear cross member reinforced, Interface for fleet management system, Seats in the cab: Armrest for passenger seat, Seats in the cab: Driver's seat comfort suspension seat, Seats in the cab: Driver's seat backrest foldable, Sun visor external, Sun protection roller for side window, Driver's door, 12V socket in the passenger footwell, 24V socket in the passenger footwell additionally, Daytime running lights automatic, Additional thermal insulation, Auxiliary heater (water) Further equipment: Emissions standard EURO 6, Axle configuration: 6x2, Front axle load 7.5 t, Trailer socket 24V / 15-pin, Antos, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: Tilting mechanism hydraulic, Cab: M ClassicSpace, Cab variant: ClassicSpace, Storage compartment outside left, Cab: steel sprung, Standard, Cab floor with engine tunnel 320 mm, Cab: Mounting height 420 mm, Suspension: Leaf / Air, Window lift electric, Windshield tinted, Generator 100 A, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Lifting roof manual (steel), Rear axle bevel gear 440, Body/Structure: Chassis, Comfort locking system, Steering assist pump unregulated, Air intake from the front, Air compressor 2-stage, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine compartment encapsulation, Trailing axle single-tired, Wheelbase 4900 mm, Ramp mirrors, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / Upholstery: Fabric, Seats in the cab: Passenger functional seat, Splash guard front, Stabilizer front axle, Stabilizer additional, Rear axle / trailing axle, Socket in the cab 24V, Tachograph / EG control device, Underbody fairing aerodynamically shaped, Underrun protection front, Preparation for toll collection, Front axle angled, Water pump regulated, Permissible total weight 25.00 t

Condition: used, mileage: 558,000 km, power: 290 kW (394.29 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,980 mm, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 44 m³, loading space length: 7,760 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Orten SafeServer sliding tarpaulin body * DEKRA-certified cargo securing system * Beverage certificate * Draught beer certificate * Chemical certificate (IBC) * Waste paper certificate * 4 rows of cargo securing Gksdpezknxasfx Ak Ujb * 2,500 kg D'hollandia tail lift * Cargo area dimensions: 7,700 x 2,480 x 2,300 mm * Liftable trailing axle * Retarder * Constant throttle * Cruise control * Seat heating * Air conditioning * Medium cab with 1 bed * Spoiler * Sun visor * Automatic transmission * Differential lock * Leaf/air suspension * Euro 6 * Bluetooth radio * Lane keeping assistant together with tandem SafeServer trailer * 18,000 kg * Payload 12,945 kg * 2,500 kg D'hollandia tail lift * Cargo area dimensions: 7,760 x 2,480 x 2,300 mm ---- Special equipment: Trailer brake 2-line, Audio system: CD radio (Bluetooth), Exhaust system on the lower right, Battery 220 Ah, Compressed air connection in the cab, Suspension: Front springs 7.5 t, 1 leaf, Info display 10.4 cm with additional display, Fuel tank: 630 L, aluminum, Air deflector on the roof (lockable), Engine brake reinforced, Trailing axle steered, liftable, Retarder, Switch for tail lift, Rear cross member reinforced, Interface for fleet management system, Seats in the cab: Armrest for co-driver's seat, Seats in the cab: Driver's seat, sprung seat, comfort, Seats in the cab: Driver's seat backrest foldable, Sun visor outside, Sunblind for side window, driver's door, 12V socket in the co-driver's footwell, 24V socket in the co-driver's footwell in addition, Daytime running light automatic, Additional thermal insulation, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Axle load front axle 7.5 t, Trailer socket 24V / 15-pin, Antos, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: Tilting device hydraulically, Cab: M ClassicSpace, Cab variant: ClassicSpace, Stowage flap outside left, Cab: steel-sprung, Standard, Cab floor with engine tunnel 320 mm, Cab: Mounting height 420 mm, Suspension: Leaf / Air, Window lift electric, Windshield tinted, Generator 100 A, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Lifting roof manually (steel), Rear axle bevel gear 440, Body/Structure: Chassis, Comfort central locking system, Steering pump unregulated, Air intake from the front, Air compressor 2-stage, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine compartment encapsulation, Trailing axle single-tired, Wheelbase 4900 mm, Ramp mirror, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / Upholstery: Fabric, Seats in the cab: Co-driver's functional seat, Splash guard front, Stabilizer front axle, Stabilizer additional, Rear axle / trailing axle, Socket in cab 24V, Tachograph / EC control unit, Underbody fairing aerodynamically shaped, Underrun protection front, Preparation for toll collection, Front axle cambered, Water pump regulated, Permissible total weight 25.0 t

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Stationary reciprocating compressor with a balanced horizontal configuration. Three-stage, double-acting design with intercooler, crossheads and circulating-water cooling. Capacity: 17.88 m³/min. Discharge pressure: 16 bar. Speed: 721 rpm. Crankshaft power input: 199.4 hp. Serial No.: 21968. Gkjdpezvcfrofx Ak Ueb

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 6 h, power: 55.4 kW (75.32 HP), load capacity: 454 kg, mast type: telescopic, lifting height: 24,800 mm, lifting power: 454 kg/m, platform length: 2,440 mm, platform width: 910 mm, overall weight: 14,300 kg, transport length: 7,820 mm, transport width: 2,500 mm, transport height: 2,960 mm, construction height: 2,960 mm, fuel type: diesel, fuel consumption per hour: 5.5 l/h, fuel tank capacity: 135 l, tire size: 385 / 45 – 28 (Ruw terrein, Non-marking), tire condition: 100 %, wheelbase: 2,800 mm, ground clearance: 410 mm, color: red, Equipment: UVV, all wheel drive, differential lock, soot filter, tilting carriage, === KEY SPECIFICATIONS === Year: 2022 Operating hours: 6 h Working height: 24.80 m Max. horizontal outreach: 17.80 m Platform capacity: 454 kg Platform dimensions (L × W): 2,440 × 910 mm Gksdpjxct Hysfx Ak Ujb Platform rotation: Yes (180°) Turret rotation: 360° (continuous) Boom type: Telescopic Jib: Yes (standard, length 2.31 m, vertical rotation 135°) Drive type: Diesel Drive system: 4×4 Stabilisers: No Tyres: Non-marking (385/45-28, rough terrain) Engine manufacturer: Deutz D2.9 L4 – 55.4 kW (74 HP) Emission class: Stage V Weight: 14,300 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Fully inspected and tested by certified professionals === CONDITION === Excellent working condition – fully checked, maintained, and tested by professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excluding VAT). The Magni DTB 24 RT is a powerful diesel telescopic boom lift with a working height of 24.8 metres and a horizontal outreach of 17.8 metres. Thanks to its 4×4 drive, proportional controls, and 360° continuous rotation, this machine ensures excellent stability, performance, and safety on any terrain. It is equipped with a reliable Deutz Stage V engine, non-marking off-road tyres, and a standard jib with 135° vertical rotation. Fully CE certified, supplied with complete technical documentation, and immediately available from stock. === DELIVERY === Crane loading available on request for smooth handling during dispatch. Flexible delivery options tailored to your destination and logistics preferences. All transport is professionally handled by the Collé Rental & Sales logistics team.

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Gkjdpfxszbybie Ak Ujb Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: used, Year of construction: 2015, operating hours: 2,070 h, Equipment: air conditioning, Make of engine: Kubota CE mark: yes Gkodpezzl Rzofx Ak Ueb EPA Marked: yes Emission level: Stage IIIA / Tier IV interim Production country: DE Please contact Kristoff Van Havere for more information - Cab with airco

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo Gkodjwid Spjpfx Ak Ueb High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. Gksdpfx Akozylx Ae Usb - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Taper Size ISO 40

Condition: used, mileage: 252,000 km, first registration: 07/2023, fuel type: diesel, fuel: diesel, Year of construction: 2023, Mercedes-Benz Sprinter Pro 317 CDI Chassis *Former refrigerated vehicle!* • Engine: OM 654 DE 20 LA • Power: 125 kW / 170 hp • Emission standard: EURO 6e • HVO compatible • 9-speed automatic transmission (9G-Tronic) • ABS / ASR / ESP • Alternator 14V / 250 A • AGM battery 12V 70 Ah • Single-pole main battery switch • Jump-start contact • Terminal strip for electrical connection • Outside temperature display • Engine oil level display at cold start • 93-liter tank • Fuel filter with water separator • SCR emission control, generation 4 • Crosswind Assist • Traffic Sign Assist • Active Lane Keeping Assist • ATTENTION ASSIST • Communication module (LTE) for digital services • Mercedes-Benz emergency call system • Breakdown management • Thermal insulation glazing with band filter on windscreen • Rain sensor • WET WIPER SYSTEM • Electrically adjustable, heated, folding exterior mirrors • Semi-automatic climate control TEMPMATIC • Multifunction steering wheel • Height- and tilt-adjustable steering wheel • Vibration damper • Driver and passenger airbags • Driver’s seat: suspended comfort seat with lumbar support and armrest • Heated driver’s seat • Low driver’s seat box • Front passenger double seat • Seat belt warning for driver & passenger • Entry grab handles for driver & passenger • Rear bulkhead trim • DAB radio • Navigation system • USB socket 5V • Instrument panel charging package • Smartphone integration package • MBUX multimedia system • 1-DIN slot front, under headliner • Front cup holders • Combined instrument panel with color display • Speedometer in km/h • Central locking • Smoker package • Acoustic package • Electrical system for body builder conversion • LED High-Performance headlights • Fog lights with cornering function • Driving light assistant • Side marker lights • Outline lights • Rear lights, partially LED technology • Adaptive brake light • Extended rear light wiring harness • Trailer socket pre-installation • Pre-installation for 3rd brake light electrics • Pre-installation: programmable special module electrics • Pre-installation: switch panel • Pre-installation: Remote Service Plus • Pre-installation: Live Traffic Information • Pre-installation: bodybuilder’s blind spot assist • Pre-installation: reverse assist electrics • Front mud flaps • Longitudinal beam reinforcement • Rear towing eye • Minimum unladen weight: 2,381 kg • Additional base construction measures • Additional base construction measures 2 • Gross weight: 3,500 kg • Axle ratio: i=3.923 • Reinforced front axle load • HOLD function • Hill start assist • Stability control stage II • Wireless tire pressure monitoring, front and rear axles Gkedpfx Ajyut H Sok Ueb • Tire size: 235/65 R16C • Tire tread depth: 5/5 / 7/9 mm • Rims: steel 6.5 x 16 • Wheelbase: 3,660 mm • Frame length: 3,350 mm - 1st owner! - German vehicle! Errors and prior sale excepted!