Tractor

LINDNER Lintrac 75 LS

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. Prodpfx Aszawm Hsf Ssb The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers Podpfx Aozpcvdef Sorb 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: new, power: 232 kW (315.43 HP), gearing type: mechanical, fuel type: diesel, fuel tank capacity: 313 l, emission class: euro3, Year of construction: 2016, operating hours: 18,000 h, Country of origin: Belgium Pjdpfey Tygqjx Af Serb Displacement: 9,300cc Dimension: 8,763 x 2,998 x 3,556 Bucket size: 4.2 Cubic Meter = More information = Number of cylinders: 6 Empty weight: 23.200 kg Engine type: Caterpillar C9.3 ACERT Bucket volume: 4.2 m^3

Condition: good (used), functionality: fully functional, operating hours: 90 h, power: 29.42 kW (40.00 HP), motor manufacturer: Lombardini, overall weight: 2,100 kg, Goldoni Euro 45SN articulated tractor with only 90 working hours on the clock. The rotary tiller is available as an option; it is lightly used but in excellent condition. Brand: Goldoni Model: Euro 45SN Drive: Diesel, 4-cylinder Weight: 2100 kg Operating hours: 90 hours Engine: Lombardini 40 hp Price without tiller: €23,500 Price with tiller: €26,000 Predpfoy Sad Tjx Af Sob

Condition: used, Year of construction: 2020, operating hours: 521 h, Internal vehicle number: VTC30048 Available immediately. More information at: Luis Lucena Viktoria Sologubova Manitou MHT 10180 heavy-duty telehandler – 18-tonne lifting capacity – 521 operating hours High-performance Manitou MHT 10180 heavy-duty telehandler, manufactured in 2020, with just 521 operating hours. The machine offers a maximum lifting capacity of 18,000 kg, a lifting height of 9.63 m, and is equipped with a hydraulically adjustable fork carriage and pallet forks. Technical data: * Vehicle number: VTC30048 * Vehicle condition: Used machine * Category: Telehandler * Manufacturer: Manitou * Model: MHT 10180 * Series: 129M ST4 S1 * Year of manufacture: 01/2020 * Model year: 2020 * Operating hours: 521 hours * Maximum lifting capacity: 18,000 kg * Maximum lifting height: 9.63 m * Maximum reach: 5.56 m * Unladen weight with standard forks: 24,000 kg * Technical inspection: New * CE marking: Present Engine and drive: * Engine manufacturer: Mercedes-Benz * Engine type: OM 934 LA * Emission stage: Stage IV/Tier 4 Final * Cylinders: 4 * Displacement: 5,100 cm³ * Power: 129 kW (176 hp) * Maximum torque: 750 Nm at 1,600 rpm * Transmission: Hydrostatic * Forward/reverse gears: 2/2 * Maximum travel speed: 25 km/h * Traction force under load: 15,970 daN * All-wheel drive * All-wheel steering * Automatic negative parking brake * Hydraulic service brake Hydraulic system: * Variable hydraulic pump * Hydraulic flow rate: 205 l/min * Hydraulic pressure: 350 bar * Hydraulic oil tank: 290 liters * Hydraulically adjustable fork carriage Dimensions: * Overall length with implement carriage: 6.65 m * Overall width: 2.52 m * Overall height: 3.00 m * Wheelbase: 3.75 m * Ground clearance: 0.44 m * Turning radius (outer radius): approx. 5.50 m * Tilt angle: 12° * Dump angle: 105° Capacities: * Fuel tank: 315 liters * AdBlue tank: 63 liters * Hydraulic oil: 290 liters * Engine oil: 21 liters Cab and safety: Enclosed ROPS/FOPS cab, Level 2 Safety system according to EN 15000 JSM joystick control All-wheel steering Rotating beacon Work lights Cab protection grille Large-dimensioned off-road tires Noise level at the driver's seat: 80 dB(A) External noise level: 107 dB(A) Attachment: * Manufacturer: Manitou * Type: PFF + POS + DL * Serial number: 53010702 Pedpfsza Nq Rsx Af Sorb * Year of manufacture: 2019 * Self-weight: 1,900 kg * Rated lifting capacity: 14,000 kg * Load center: 1,200 mm * Hydraulically adjustable fork carriage * Pallet forks included Inspection and functional test possible by prior arrangement. Further information, photos, load charts, and videos are available upon request. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 1991, operating hours: 648 h, power: 14 kW (19.03 HP), Equipment: ABS, all wheel drive, cabin, front linkage, John Deere 670 Farm Tractor * Continuously variable rear PTO * Front lift * Front hydraulics * Rear lift * Switchable all-wheel drive * Pivoting snowplow Technical data: * Engine: Yanmar 3-cylinder diesel * Power: 14.4 kW * Displacement: 0.9 l Prjdpfx Afoy Skl Ue Sjb * Weight: approx. 843 kg * Maximum speed: approx. 16.7 km/h * Front tires: 6-12 * Rear tires: 9.5-16 * Dimensions (length): approx. 2.76 m Special features: * Compact design * Fuel-efficient and durable Yanmar engine * Versatile (farmyard, stable, green areas) ----Vehicle number: 12033----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport YOUR VTS TEAM

Condition: used, Year of construction: 2016, operating hours: 3,410 h, power: 190 kW (258.33 HP), next inspection (TÜV): 09/2028, Equipment: air conditioning, all wheel drive, Internal vehicle number: FG50320 Available immediately at our yard in Kaufungen. Pjdpoytlldjfx Af Serb More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Never registered. Financing example: * Internal number: Tractor * Purchase price: 72,000.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 1,100.02 € Residual value: 14,380.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, lifting height: 3,300 mm, emission class: euro5, mast type: telescopic, shovel volume: 0.6 m³, digging bucket width: 1,670 mm, Year of construction: 2025, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies as well as similar sectors. We also guarantee service for the machine after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust frame and is capable of operating under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL EQUIPMENT: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket volume: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick-hitch system * 2x hydraulic control circuits * Reversing camera * Heating * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lights PRICE: Prsdsw Ufixepfx Af Sob €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main German office for Kingway. We offer a huge selection of machines in stock, with around 100 units always available. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide access to all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg Podpfx Afjy Ubguj Ssrb * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Pjdeid Szvepfx Af Serb Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.