Used Stacking Line for sale (11,503)

Year of construction: 2008, condition: excellent (used), We offer a KRONEN GEWA 3800V PLUS vegetable washing machine (year 2008, 6.3 kW, 3×400 V) complete with a KRONEN GE 11 air blow-off unit (year 2008, 2.2 kW, 3×400 V, 50 Hz) a professional, continuous washing and dewatering solution for lettuce, vegetables, herbs and fruit. The GEWA 3800V PLUS is a universal washer for pre-washing, washing, disinfecting, mixing and rinsing both cut and whole products such as baby leaf, iceberg, vegetables, herbs and fruit. It uses KRONEN’s HELICAL washing system, where the product travels through the wash tank in a spiral water flow up to ten times the tank length. This ensures thorough yet gentle cleaning, optimal product distribution and significantly reduced water consumption compared to conventional flotation washers. Hjdpfjytthmex Ahvsni Floating and sinking products are conveyed through the tank by the helical water flow. At the end of the tank, product and water overflow to the vibration outfeed, where the product is sprayed with fresh water and pre-dewatered, while the water is filtered and returned to the pump tank for reuse. A built-in sand trap separates heavy dirt such as sand and small stones at the bottom of the tank, preventing it from returning to the product flow. The machine is built entirely from AISI 304 stainless steel with excellent hygienic design and easy access for cleaning and maintenance. All pipes, pump casing, wash and pump tanks and covers are stainless steel; in the PLUS models with vibration outfeed there are no screws in the product area, which further improves hygiene. The set includes a KRONEN GE 11 air blower (2008, 2.2 kW, 3×400 V, 50 Hz), designed to blow off water from the product surface after washing. Placed after the washer, it improves dewatering, reduces the load on subsequent centrifuges/dryers and enhances shelf life and appearance of the final product. Technical specification KRONEN GEWA 3800V PLUS Manufacturer: KRONEN GmbH Model: GEWA 3800V PLUS (with vibration outfeed) Year of manufacture: 2008 Max. capacity: up to 2,500 kg/h (depending on product and dwell time) Power: approx. 6.3 kW, 3-phase Voltage: 3×400 V, 50 Hz Tank volume: approx. 800 l (GEWA 3800 PLUS series) Material: AISI 304 stainless steel – pipes, pump casing, wash and pump tanks, covers Outfeed: vibration outfeed with fresh water spray and pre-dewatering Function: continuous pre-washing, washing, disinfection, mixing and rinsing of cut and whole lettuce, vegetables, herbs and fruit Washing system: HELICAL spiral washing system with adjustable water flow Features: Sand trap sedimentation unit for heavy particles Reduced water consumption through recirculation and filtration Compact, modular design – easy integration into processing lines Technical specification KRONEN GE 11 air blow-off Model: GE 11 air blower Year of manufacture: 2008 Function: air blow-off / dewatering after washing – removes surface water from product Power: 2.2 kW Voltage: 3×400 V, 50 Hz

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Hnodpfoyqxxxsx Ahvei Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Hnsdsyqxwzepfx Ahvoi Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: used, consisting of: Contents: 2 x 500L Cooking-Stirring vessel stirring system with scrapers Max.4 bar steam pressure Yoc 2010 incl. control box Process vessel 1: motor gearbox agitator 9-2020 Hnsdpfx Aheyqxuyovoi Process vessel 2: motor gearbox agitator 16-02-2021 1 x Lobe Pump Jabsco Incl. 2 steam control valves. RTK Platforms in stainless steel

Condition: used, mileage: 4,000 km, power: 150 kW (203.94 HP), first registration: 09/2025, fuel type: electric, gearing type: automatic, suspension: other, number of seats: 5, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, traction control, Roadworthy, touchscreen, electric, accident-free, demonstration vehicle, 360-degree camera, metallic paint, 5-door, first owner, no environmental badge (1), leather, lithium-ion, battery certificate, Apple CarPlay, ISOFIX front passenger seat, Android Auto, navigation pre-installation, wireless smartphone charging, fully digital instrument cluster, parking exit assistant, distance warning system, black, dual-zone automatic climate control, front side airbags, passenger airbag, front window/head airbags, driver side knee airbag, power comfort seats, ventilated front seats, height-adjustable driver’s seat, height-adjustable front seats, leather steering wheel, shift paddles, LED headlights, automatic headlight control, Keyless-Go, keyless start, front parking sensors, rear parking sensors, parking assistance, parking camera, daytime running lights, LED daytime running lights, digital radio, rain sensor, voice control, traffic sign recognition, digital speedometer, ambient lighting, emergency call system, blind spot assist, hill start assist, hill descent control, tire pressure monitoring, Linguatronic, electronic traction control, electric windows, seat heating, rear seat heating, telephone pre-installation, hands-free system, Bluetooth hands-free system, electric tailgate, multifunction steering wheel, radio, sound system, tinted glass, auto-dimming mirror, auto-dimming interior mirror, heated steering wheel, power steering, non-smoking vehicle, electrically adjustable exterior mirrors, rear headrests, alarm system, head-up display, speed limiter, adaptive cruise control, ISOFIX child seat anchors, split rear bench seat, third brake light, center armrest, lane change assist, lane keeping assist, driver fatigue detection, high beam assist, automatic transmission with shift paddles, fully digital instrument cluster, heat pump, assistance systems: blind spot assist, driver fatigue detection, traffic sign recognition, rain sensor, high beam assist, light sensor, hill start assist, hill descent control, lane keeping assist, lane change assist, distance control cruise control, parking exit assistant. Hjdpfxoyhn Nbo Ahvsni

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Hnjdev Tlgdepfx Ahvsi Width: 30-200mm High: 13-50mm Length: 2-6m Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Possible to scan different profiles

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: Multiple on request, Continuous Potato Peeling Line – Tong Engineering & Sormac Equipment This continuous potato peeling line combines reliable Tong Engineering handling equipment with efficient Sormac peelers to create a complete solution for high capacity potato processing. Designed for consistent product flow and dependable performance, the system is well suited to processors looking to streamline their peeling operation. The equipment moves potatoes smoothly from cleaning and peeling through inspection, treatment, and final product safety checks. With trusted machinery from Tong and Sormac, this line delivers both efficiency and durability in demanding production environments. Equipment Included Tong Engineering De-Stoner The process begins with a Tong de-stoner, which removes stones, soil, and heavy debris from incoming potatoes. This stage protects downstream equipment and ensures cleaner product enters the peeling process. Two Sormac Continuous Peelers The line includes two Sormac continuous peelers designed for high capacity peeling while minimising product loss. These machines efficiently remove potato skins while maintaining consistent throughput for industrial potato processing operations. Tong Engineering Surge Tank A Tong surge tank regulates product flow between processing stages. This buffer helps maintain a steady supply of potatoes through the system and prevents bottlenecks during production. Tong Roller Inspection Table The Tong roller inspection table allows operators to visually inspect peeled potatoes and remove defects. Rotating rollers spread the product evenly, improving visibility and making quality control easier. Tong Dip Tank with Dosing Unit A Tong dip tank with integrated dosing unit allows potatoes to be treated with anti-browning or preservation solutions. This step helps maintain product appearance and supports shelf life after peeling. Loma IQ3S Metal Detector The final stage of the continuous potato peeling line is a Loma IQ3S metal detector, which checks the finished product for metal contamination and helps meet food safety standards. Key Benefits Complete continuous potato peeling line for commercial processing Combination of Tong Engineering handling equipment and Sormac peelers Designed for efficient stone removal, peeling, inspection, and treatment High throughput suitable for industrial potato processing Integrated metal detection for product safety Hodpfjytn H Dox Ahveni Reliable equipment built for demanding production environments Suitable Applications This equipment is ideal for: Potato processing facilities Fresh produce packing operations Ready meal manufacturers Vegetable processing plants Enquiries If you are interested in this continuous potato peeling line, please get in touch for further information, pricing, and availability. The system offers a dependable solution for large-scale potato processing. Five individual lines available We hold a wide range of new and used food processing machinery in stock, some of which may not be showing on our website. If you have any additional requirements please get in touch

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), Year of construction: 2026, Centrefigual Gold concentrator Knelsn and Falcn type Hnsdpfx Aeytnqishvei

Condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 180 kg, empty load weight: 150 kg, shovel volume: 1 m³, Year of construction: 2026, LK100 Laboratory Jaw Crusher - Stone crusher pilot scale crusher Hodpfx Aeytnl Tohveni

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale: conveyor belt – sorting line consisting of 4 belt conveyors. - Each conveyor features independent speed control (individual adjustment). - Total length approx. 19 metres. - Perfect condition – well-maintained, fully operational, ready for immediate use. - Significantly accelerates and streamlines the sorting process, reducing operational costs. The line is ideally suited for used clothing sorting facilities, as well as for a wide range of recycling, production, and logistics applications. Construction features: - professional, robust, industrial-grade build - highly reliable, trouble-free operation - stable performance and high durability - adjustable leg height Hjdpfsytnn Uex Ahvoni - health & safety guards - flexible operation thanks to individual speed control for each section - excellent condition On-site inspection possible. Collection/transport to be arranged.

Condition: new, power: 90 kW (122.37 HP), fuel type: electric, Year of construction: 2026, machine/vehicle number: B18002026002, Ball mill Hedjytm I Tepfx Ahvsni

Condition: used, functionality: fully functional, Year of construction: 2015, Cutting and rewinding material: - Galvanized, painted steel and aluminium with thickness from 0.3 to 3.0 mm Hedpfx Asygrv Ashvsni - Max. input sheet width is 1,550 mm - Strip widths from 32 to 1,550 mm - Line speed up to 50 m/min - Decoiler load capacity: 12,000 kg Maximum coil width: 1,550 mm Coil inner diameter: from 480 mm to 620 mm Mandrel expansion: hydraulic Cut-to-length: up to 3,000 mm

Condition: like new (used), Year of construction: 2022, Infeed height 900 mm Infeed width 300 – 800 mm Non-ferrous metals: Either 0.6 – 0.8 mm or 0.8 – 1.0 mm (has to be set before ordering) Non-ferrous metals: 1.0 – 1.2 mm (only with façade profiles) Steel (320 N/mm²): 0.55 – 0.70 mm Stainless steel: Max. 0.5 mm Hjdexwxdgspfx Ahveni 3,830 mm x 2,045 mm x 1,275 mm 1,770 kg

Condition: excellent (used), Year of construction: 2014, Ref:11063 . 2014 Schneider Senator ‘S-Line’ 115H. Hnodpfx Ahoypgt Ujvoi Very low usage machine - only 320,000 cuts! High speed 115 cm guillotine with; Central stainless steel air table with blower Stainless steel air tables left & right Micro-computer programme (up to 5,700 steps) TFT colour monitor with soft keypad plus external programmable memory card Programme correction for print variation (linear & %) Variable pressure hydraulic clamp via display Twin hydraulic bottom knife drive giving more powerful cutting and less wear Illuminated cutting area 2 high speed steel knives I.R. light beam guarding with ‘FFM’ (UK HSE spec) Central lubrication Auto knife change from the front of the machine Including tools & manuals. Specification: Cutting width, Max: 115 cm Feed depth, Max: 115 cm Clamp opening, Max: 17 cm Side table width, Max: 43.6 cm Smallest cut (auto) : 35 mm/ 1.38” (manual) : 25 mm/ 0.98”_ Power required : 7.5 kW Clamp pressure : 300 – 3,700 daN

Condition: excellent (used), EWAG EWAMATIC LINE is a CNC tool and cutter grinder offering precision, high accuracy and reliability. 6 axes (X360×Y240×Z240 mm; B ±135°). 6 spindles, 7.5 kW spindle, 16 kVA, feeds 10 m/min, 3x400 V 50Hz, air 6 bar; weight ~4000 kg; 3400×2200×2500 mm. Equipment: Tool setter Renishaw, redressing device, oil mist extractor, loading robot Fanuc LR Mate 200iC, fire extinguishing system. Achieves tight tolerances; suited to automotive, aerospace, medical and watchmaking. Hsdpfx Aheypbfljvjni

Year of construction: 2022, condition: used, functionality: fully functional, ROMACO NOACK BLISTER PACKAGING LINE, MODEL UNITY 300 Single-track blister packaging machine with rotary sealing and a continuous motion cartoner designed for low to medium speed segment. The modular line for connection to different track & trace systems and end of line packaging solutions. Built in 2022. MACHINE CHARACTERISTICS Hedpfsytgqhex Ahveni - Blister tracks: 1 (max) - PDA interface OPC UA and Remote Assist connection Ethernet PRODUCTION - Output blisters/minute: 300 (max) - Output cartons/minute: 10 – 300 (min-max) - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm DIMENSIONS - Machine dimensions: 8,270 × 1,890 × 2,230 mm - Weight: 5,300 kg (approx)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,000 h, functionality: fully functional, Timn Scope of Supply • Item 1: Timesavers machine model 71-serie-1600-WW-RT (for No. 4 finish). • Item 2: Timesavers machine model 71-serie-1600-BB-RT (for SB finish). • Item 3: Filtration equipment • Item 4: Laminator UNIVERSAL LAMINATOR UL 2931 • Item 5: Extensive set of spare parts (contact rollers, billyrollers) • Additional equipment: tables and pallet stacks • Year of manufacture: 2007 • Operating hours: 37,000 • Machine in working condition. 1.2.1 ITEM 1: First Machine: 1 TIMESAVERS, 71 series-1600-WW-RT General Description: Grinding machine equipped with two wide abrasive belt top contact rollers for grinding and finishing stainless steel coils to a NO. 4 finish. Operation: • Load meter indicates percentage of head motor load, allowing full utilization of available horsepower. • Mitsubishi E 1070 Control unit including: • Electronically digital feed speed read-out in mm/min. • Electronically digital thickness set-up read-out in mm. • EMC Filter (for fluctuations in the electrical supply). 1st Head for No. 4 finish: • Contact roller: Ø280 mm, with special vulcanized oil and heat-resistant rubber, 55 Shore hardness, with special profile groove. • Heavy-duty grinding head. • Fine height adjustment of the head, precision to 0.01 mm for pressure or abrasive belt thickness adjustment. • Displacement can be read out on the dial indicator. • Outboard support: quick-release M20 bolt for fast abrasive belt changes and rigid head support. • Abrasive belt tension: air-operated and activated by thumb switch. Air tensioning automatically compensates for belt stretch. • Machine cannot be started unless belt is tensioned. • Abrasive belt tracking: electronic system automatically keeps the high-speed abrasive belt on the head. • Belt trimmer: lever to correct belt mis-tracking. • Tracking limit switch: safety stops the grinding head in case of tracking failure. • Frequency-controlled main motor, 45 kW, 8-22 m/sec for achieving different finishes. 2nd Head for No. 4 finish: (Specifications identical to the 1st head: 280 mm contact roller, frequency-controlled 45 kW motor, etc.) Technical Specifications (Item 1): • Max. working width: 1600 mm • Abrasive belt dimensions: 1600 x 2620 mm • Working height opening: 0.5-50 mm • Feed speed (frequency controlled): 0-30 m/min • Main motors (1st & 2nd head): 45 kW each • Total installed power: Approx. 100 kW • Machine weight: 9,000 kg _____ ITEM 2: Second Machine: TIMESAVERS, 71 series-1600-BB-RT General Description: Brushing machine equipped with two brush units for SB Scotch-Brite brush finish. Brush Head Specifications (1st & 2nd Head): • Scotch-Brite brush: Ø400 mm Hnsdpfxjxvbxdj Ahvoi • Motorized height adjustment • Adjustable oscillation: 200 to 700 oscillations per minute • Frequency-controlled main motor, 22 kW per head Technical Specifications (Item 2): • Max. working width: 1600 mm • Brush diameter: 400 mm • Working height opening: 0.5-80 mm • Brush oscillation motor: 3 kW • Machine weight: 12,000 kg

Condition: used, mileage: 46,489 km, power: 96 kW (130.52 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,786 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1156. PS32253 ----EQUIPMENT - Passenger airbag Hnjdpeyn Udlefx Ahvji - Fixed tow bar - Tow bar electrical prep kit - 256° double rear doors, without windows - Rear ladder and roof rack - LED load compartment lighting - Wooden load floor - Smoker package - Technology package 6P - SVO: Express Line package - Side wall panelling up to the roof - WÜRTH shelving system - Central locking with remote control - Transmission: 6-speed manual - ABS, EBD and DRIVER ASSISTANCE - Driver airbag - Exterior mirrors, electrically adjustable and heated - Battery: Extended battery life - On-board computer - High roof - Double rear doors/180° (without windows) - Tachometer - Third brake light - Electric front windows - Electronic parking brake - Ford Easy Fuel - FordPass Connect - Halogen headlights with daytime running lights - Lockable glove compartment - Interior lighting with delay function - Automatic climate control - 70-litre fuel tank - Paintwork: solid paint - Load compartment lighting - Emergency assist - Technology package 2 - Particle filter: diesel particulate filter - Radio: 12" multifunction display & Ford SYNC 4 - Tyre pressure monitoring system - Rain-sensing wipers - Sliding door: right-hand side - Rear mud flaps - Side protection strips - Power steering - Seat belts - Seats: Seat package 18A - Start-stop system - Partition (plastic) at B-pillar height - Rear step - Air recirculation control - Lashing eyes - Immobiliser - Heat-insulating, lightly tinted glazing - Central locking with remote control - Overhead storage compartment, front ... and much more. ----The vehicle is in an unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also available with no deposit! Do you have further questions? We are happy to advise you!

Condition: excellent (used), IM Very good condition. Hnodpfx Ahsytc Najvoi

Year of construction: 1980, condition: good (used), functionality: fully functional, For sale: dry lumber sorting line, fully dismantled and ready for transport. All components have been meticulously marked according to their positions and packed in transport crates to ensure smooth logistics and hassle-free installation. Complete assembly drawings are available, and we are happy to provide further information, photographs, and technical specifications upon request. Please also note that a green (fresh timber) sorting line will soon be available for sale, which can be connected to this dry sorting line if needed, forming an integrated and efficient production system. Specification: Fall Pocket Dry Sorting Line The line includes the following main components: Pos 10. Intake for packages with tilt hoist, destacking, and unscrambler Hnedpfeytc A Tjx Ahvsi Pos 20. Side conveyor for boards directed to operator for quality inspection Pos 30. Trimmer Pos 40. “Top” conveyor over the pockets Pos 50. Fall pockets Pos 60. Side conveyor under the pockets Pos 70. Elevators before the packing machine Pos 80. Complete packing machine Pos 90. Press and strapping unit with infeed and outfeed conveyors Pos 100. All existing electrical and electronic equipment related to the line

Condition: ready for operation (used), Voortman VB1250 lintzaag dop: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen van de lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale booreenheden 1 verticale booreenheid Elke unit heeft een automatische gereedschapswisselaar met 5 posities. spindel: SK40 (koeling via de spindel) Boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm schroefdraad tappen: M8/M24 Inclusief meting van de profielhoogte middelpuntmarkering inbegrepen nummeringseenheid inbegrepen 18 meter aan invoerrollenbanen 6 dwarsaanvoerbanden van 4 meter lengte 16 meter aan afvoerrollenbanen maximale breedte: 1050 mm capaciteit: 400 kg/m³ maximaal positioneringsgewicht: 9 ton Rollentoevoer meetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4 kW - 160 bar Hedpfx Aswlkwwshveni

Condition: ready for operation (used), Decoiling and rollforming line for manufacturing roof sandwich panels Max width of finished panel: 1000 mm PRODUCTION SPEED 7,30 meter per minute UP Floor 1 - Stam decoiler of 12 ton 2 - Memco embosser 3 - In-line profiling machine 4 - Sheet preheating DOWN Floor 1 - Stam decoiler of 12 ton 2 - Roll forming machine 3 - Sawing machine 4 - Pick and place for the insertion of sheets in the Stam production line, max panel length 18 meter 5 - Automatic machine for the overlapping of sheets 6 - Glue device 7 - Sheet preheating room Hnedjx Imndepfx Ahvei 8 - PIR foaming gantry 9 - PIR dosing bench 10 - Siempelkamp 25 meter belt press 11 - Panels Cutting Machine (Flying Saw) 12 - Stacking unit for max panellength 16 meter 13 - Horizontal packing unit Total length of the line from decoiler to stacking is 90 meters. The packing unit is located next to the stacking unit, panels are moved from the stacking unit with side conveyors.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, conveyor belt thickness: 4 mm, stack height: 1,400 mm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Auction of a packaging line comprising the following main components: Bundle pick-up and tipper (Eich) Strapping unit (TITAN) Oiling station (Eich - Steidle) Wrapping station (Böhl) Centering table with gripper (Eich) Stacking station feed (Eich) Ready-for-dispatch station (STU) Electrical control system (wpe GmbH) Safety devices (Hengstebeck & Eich) TECHNICAL DETAILS Maximum bundle diameter: 1,500 mm Hedpfx Aoytcbpjhvoni Maximum bundle weight: 6,000 kg Maximum single ring width: 600 mm Strap thickness: 0.1 - 4.0 mm Maximum package weight: 6,000 kg Maximum package height: 1,400 mm EQUIPMENT Complete documentation and software Note: Dismantling and loading can be offered by the seller for €60,000.

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. As an option we can offer used machines for your requirements. Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery Hnodpfjqlbpgjx Ahvji

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. Hsdpfjuzv Tzjx Ahvoni SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).