Used Stack Frame for sale (10,170)

Condition: used, machine/vehicle number: 008347, Max. panel width: 1200 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 50 Kg Work capacity: 18 Cycles/min Movement system: suction cups. Nwedjyngzpopfx Ahvod

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Nsdjym Uu Uopfx Ahvswd Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: good (used), Logitrans LL1000TE Mobile Paper Stack Lift This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery and charger. Nsdpfoymxg Iex Ahvswd Battery-powered. Automatic and manual stack lifting and lowering cycles, fast operation. Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 00020, Type: Transfer device R3 Equipment / Additional information: Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm. Nwedpfx Aoupi Aqehved

Year of construction: 1993, condition: excellent (used), machine/vehicle number: 32781, Size: 300 x 560 mm Nwsdpfehncafex Ahvsd Speed: 44.000 c/h

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails Nedpohqmghjfx Ahvewd and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 033001, Format: max. 450x310mm; at least 185x128mm; Stack height: max. 320mm Equipment / additional information: Stacking options: smooth or offset to the side Nsdpfxoiq Nfps Ahvewd - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders vertical: 4 Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm Nwedpsiwfhwefx Ahvjd

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Nwsdpfxev H E Ale Ahvod

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Solid steel frame – ensures durability and operational safety. Nwsdpfx Ahsyrr Rkevsd Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = Package of 3x very nice 2012 BURG 20FT ADR swap body chassis with SAF axles and disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT) valid until 29.06.2025, ABS/EBS, 1st and 2nd axle = lift axles, unladen weight: 3,690 kg, gross weight: 39,000 kg, 385/65-R22.5 tires, Dutch registration = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 75%; Tire tread right: 80% Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 55%; Tire tread right: 55% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tire tread left: 75%; Tire tread right: 75% Weights Unladen weight: 3,690 kg Payload: 35,310 kg Gross vehicle weight: 39,000 kg Functionality Body brand: BURG O-3-CC A7 Nwjdpfxsx Dca Ej Ahvsd Condition Technical condition: very good Visual condition: very good Identification Registration: OL-25-RX Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - ADR compliant - EBS (Electronic Braking System) - Lift axle - Alloy wheels - Air suspension - Disc brakes Nedpfx Ahoyb Rntovowd = Notes = Package of 3xx: very nice 2012 BURG 20FT ADR swap chassis with SAF axles and disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT) valid until 29.06.2025, ABS/EBS, 1st and 2nd axle are lift axles, unladen weight: 3,690 kg, max. permissible weight: 39,000 kg, 385/65-R22.5 tires, Dutch registration = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 75%; Tyre tread right: 80% Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 55%; Tyre tread right: 55% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 75%; Tyre tread right: 75% Weights Unladen weight: 3,690 kg Payload: 35,310 kg GVW: 39,000 kg Functional Body make: BURG O-3-CC A7 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Year of construction: 1979, condition: used, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel. Nedpfxevcqn Sj Ahvewd Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979 Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 18m2 Sheet with beer filtration Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, Year of construction: 1995, Machine for palletizing cartons or bottles and wrapping with stretch film. Manufacturer: KRONES Model: PALMASTER Year of manufacture: 1995 Set includes an OCTOPUS pallet stretch wrapper with pressing device. Used machines, still installed—as shown in the photos. Technical documentation included. Nedsyrf Atspfx Ahvewd A KRONES depalletizer is also available in the offer.

Condition: used, Year of construction: 2012, Machine designed for stacking goods delivered by conveyor onto pallets and wrapping them with stretch film. Manufacturer: SACMI PAKIM srl (ITALY) Model: MAXTER PAL Nsdsyrfvmjpfx Ahvowd TYPE: PS Year of manufacture: 2012 The set includes an ATLANTA MYTHO stretch film pallet wrapper with pressure applicator. Used machines, operational at the end of production, still installed – as shown in the photos. Original technical documentation available. Also for sale: depalletizer from the same manufacturer.

Condition: new, Year of construction: 2024, total height: 2,100 mm, lifting height: 2,200 mm, empty load weight: 3,000 kg, load capacity: 4,500 kg, Lifting frame for timber packages 1200 x 1200 3000 - 6000 mm 5 lifting arms Max. load 4 to Dimensions width: 2500 mm length: 5000 mm height 2100 mm Stroke: from 550 - 2200 mm Gear motor 400 V 3 KW Nodpfx Aer Ddbgshvewd

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Nsdjdzqmzepfx Ahvowd Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator Njdpfx Aoh U Dtushvjwd - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Nodeh Uhqyjpfx Ahvewd Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole Nwodshrakvopfx Ahvsd - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz Nedpfx Ahjv Uraaevowd - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Nodpfx Asfgpfpjhvowd Overall dimensions L x W x H: 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Nsdjgbpuhspfx Ahvjwd Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: excellent (used), Moulding frames, moulding boxes Nedpfx Ajd Txz Sjhvowd approx. 270 pieces very good, immediately ready for use condition lashing on pallets ready for transport

Condition: excellent (used), Working width 3200 mm year of manufacture 1992 motor power 7 kW pressing time adjustment Nsdpfjypg Rmjx Ahvswd automatic opening emergency stop switch - pull cord