Used Stack Frame for sale (11,672)

Condition: used, Used machine Condition: age-appropriate Dodpfsw Nabxjx Ab Tjwf for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW

Condition: used, Hydraulic frame press Schafberger & Sprödhuber with manual electrical adjustment. Technical specifications: on demand workpiece height: max. approx. 2,400 mm Dsdpjw I Dbmjfx Ab Tjwf workpiece width: max. approx. 4,250 mm Control: Manually

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 2,131 h, load capacity: 9,000 kg, lifting height: 3,000 mm, fuel type: gas, construction height: 2,480 mm, fork length: 1,650 mm, fork width: 300 mm, overall weight: 17,000 kg, total length: 4,725 mm, total width: 1,550 mm, motor model: Gas, Equipment: hydraulics, 1 used 9-ton forklift with LPG drive, by Paus, equipped with hydraulic fork positioner and pivoting mast with telescopic boom. ----- Dwodpfxow U Slts Ab Tef Technical data and parts list: see handout. Without packaging; any warranty rights are excluded. If you wish to dismantle the unit yourself, please include this information in your bid. We do not guarantee the accuracy of the technical data, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements listed in accident prevention regulations.

Condition: new, Steel Frame Automatic Nailing Bridge Dwededzc Rxspfx Ab Tsf A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes Dedpfjgbpuhex Ab Tswf - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Djdpfx Abowp Szls Tjwf

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Dwjdpfxoiwfhwo Ab Tsf Number of manual hydraulic cylinders vertical: 4 Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Condition: new, Year of construction: 2026, functionality: fully functional, on stock! The GAP 100 automatic profile sharpening machine sharpens your gang saws and features a compact, extremely stable design, high functionality and excellent value for money. Highlights Djdpfx Asg Uzl Ejb Tswf Hydro pneumatic return stroke of saw carriage Pneumatic saw blade clamping Precision linear guide for saw carriage Precision spindle height adjustment for saw blade width Fully enclosed protection hood with powerful water-cooling Feed speed regulator with frequency converter Grinding wheel dressing device Dust mist exhaust Lever control for 3 different tooth shapes Continuous tooth pitch adjustment Speed regulator for grinding wheel Optical signaling device for process status recognition (3-color signal lamp)

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Dwodpewbtn Rofx Ab Tjf Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) Dwjdpfx Absdzc Rfj Tef 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Motor power 4 kW Dwsdpfx Aok S Htxeb Tjf Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 130598, Automatic frame press TYPE FS Press for gluing frames, windows, doors and similar parts. Dwodpfx Ajt Du Saob Tsf Year of manufacture 1996 Hydraulics 0-100 bar Pneumatics 0-10 bar Working voltage 380V/50Hz Power 7.5 kW

Condition: ready for operation (used), A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible. Dedew R U Amspfx Ab Towf

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Dwsdpfjfqmtkex Ab Tjf Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Overall dimensions L x W x H: 1050 x 950 x 615 mm Dedpfxjfgpfpj Ab Towf Net weight: 85 kg Good condition

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Dodpfx Abedwf Dbj Tjwf

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs Dwsdpfxsb Tmrve Ab Tjf 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Dwjdpfx Asdzqmzjb Tef Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 2001, condition: ready for operation (used), Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air. Djdpfxopy Eufs Ab Tswf

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Dwjdpfx Abov Uraae Tof Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Year of construction: 2016, condition: ready for operation (used), Compressed air supply: 6bar, connected load: 2.7kW, weight: 450kg with documentation and Single-Head Welding Machine Rottler und Rüdiger Roweldo S X7, year of construction: 2016, an inspection is possible. Djdpfxsgfbqnj Ab Tjwf

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Dodshrakvopfx Ab Tswf Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Dwsdpfx Abjwd Tals Tjf

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Dwsdoh Uhqyepfx Ab Tof Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar Dwodpfxoh U Dtuo Ab Tsf 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition