Used Sps for sale (1,328)

Condition: new, ESP Top Loading Spray Washing Machines Cjdet Rrkopfx Ab Tork ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, empty load weight: 490 kg, maximum load weight: 2,500 kg, overall weight: 2,500 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/70R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2500 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes on the outside and inside, profile channels for mounting accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, accessory box, straps and anti-theft device. Crodpfx Abjq Rfk Do Tsk

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump Credpfofv Awhex Ab Tsk - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Type: Peter Wolters AC500F Double-Sided Fine Grinding Machine Very clean and extensively refurbished AC500F. Equipped with new Siemens PLC+HMI control as well as Siemens software. All bearings, seals, and bellows replaced with new components. Crsdpfx Aboxbucms Tsk All pneumatic and metering hoses are new. New hood with monitoring. This machine features a loading table and a medium lifting station. Full documentation available. Immediately available. Year of manufacture: 2001, overhauled 07/2025. Drives: 3 kW up to 300 RPM, 250 DaN, T15 gear motion. This machine comes with a warranty.

Condition: ready for operation (used), Year of construction: 2008, A complete filling line from filler to packer is available. Format: Gable top/pyramid pack 0.50l/0.75l/1l, output: approx. 7000 packs/h, dimensions X/Y/Z: approx. 9500mm/3200mm/3500mm, weight: approx. 13000kg, operating hours: approx. 32500h. Applicator: 3x Elopak E-PLA-S30, year of construction: 2009, air pressure: 700kPa, weight: approx. 1000kg. Packer: Oystar A+F Traypacker TF, year of construction: 2011. Crjdpfx Abjtul Rao Tek

Condition: new, Year of construction: 2025, HYDRAULIC PORTAL STRAIGHTENING Crjdpfx Abjwbtlvo Tok MODEL HSPS400 / 400 TON Ram Cylinder Capacity (Ton) 400 Ton at 250 Bar Min. Working Pressure (Bar) 30 Bar Max Working Pressure (Bar) 250 Bar (25 Mpa) Cylinder Diameter Ø450 mm * 1 Pc Stroke (mm) 1000mm Daylight (mm) 1300mm Table size (mm) 6000 x 3100 mm Travel size (mm) 4700 x 2600 mm Advance Speed (mm/sec) 7 mm/sec Return Speed (mm/sec) 14 mm/sec Working Speed (mm/sec) 3-7 mm/sec Motor (Kw) 25.1 KW Pump (liters) 45 CC BOSCH Rexroth Overall dimension (LxWxH) 5500 x 7000 x 4200 mm Weight (Kg) Approx. 45,000 KG

Condition: used, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, Crjdpfx Abepk Iq Nj Tek -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

Condition: new, empty load weight: 490 kg, maximum load weight: 1,510 kg, overall weight: 2,000 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 155R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2000 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes black aluminum side panels, all foldable and removable, black rims, storage box, LED lighting, sturdy eccentric locks, lashing eyes on the outside and inside, profile channels for attaching accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. Crodpfx Abjq Rfkcj Tjk We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, belts and anti-theft device.

Condition: new, pressure 300 t working feed 3-8 mm/sec stroke 500 mm return speed 15 mm/sec table-size 3000 x 1500 mm tank capacity 45 l travel x / y 2600 x 1000 mm daylight 500 mm total power requirement 18,5 kW Crodpfx Absvxw Hmj Tok weight of the machine ca. 18 t

Condition: new, maximum load weight: 29,731 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,580 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer K.SPS platform semi-trailer Immediately available Technical data: * Outer length 13,640 mm * Internal length 13,580 mm * Axle distance 1,310 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Inner width 2,480 mm * Gooseneck 200 mm * Semi-mounted height 1,180 mm * Axle load 27,000 kg * Kingpin capacity 12,000 kg * Total weight 39,000 kg * Unladen weight 6,269 kg * Pallet capacity 33 Euro pallet load capacity Chassis: * BPW axles with air suspension and disc brakes * 1st axle can be lifted automatically * Wabco brake system * 6 tires 385765 R22.5 * Axle pressure gauge Chassis: * Made of high-quality and durable steel * KTL-coated steel front panel with plywood protection inside with a height of 2,000 mm * Hardwood-coated, 30 mm thick and waterproof hardwood floor, which can take an axle load of 7,200 kg in accordance with DIN EN 283. * Jost supports * LED lighting * Load securing. * K-fix has 96 holes per side, each lashing point has a load capacity of 2,500 kg * Additional 7x2 lashing rings placed on the floor with a load capacity of 5,000 kg * 6x2 container locks suitable for 1x20 ft in the middle, 2x20 ft, 1x40 ft containers * Stake pockets outside + on the floor * Stake box under chassis * Load securing certificate according to standard EN 12642 CodeXL Miscellaneous: * 1x stainless steel toolbox * 4x extra wide boards with LED lighting Chassis color: MB 7350 nova grey Csdpoqbn R Nefx Ab Tork For further information please do not hesitate to contact us

Condition: new, empty load weight: 871 kg, maximum load weight: 1,829 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,440 mm, loading space width: 1,570 mm, loading space height: 2,000 mm, loading space volume: 10.9 m³, color: silver, construction height: 2,550 mm, working width: 2,280 mm, lowerable loading platform / manual hydraulics / braked, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. lowerable loading platform / manual hydraulics / braked Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 2.700kg - Unladen weight: 871 kg - Payload: 1,829 kg - Interior dimensions: 344 x 157 x 200 cm (L x W x H) - Overall exterior dimensions: 510 x 228 x 250cm (LxWxH) - Loading sill height: 44 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, 45mm with clamp - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: multiplex wooden floor - Side walls: sheet steel sandwich 30 mm - Side wall height: 190cm - Chassis: low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: hand pump - Drive-on angle: approx. 6 - Wheel stop: without - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 10 pieces laterally recessed - Winch: at extra charge - Supports: supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Multiplex wooden floor - extremely robust - Sheet steel sandwich 30mm - Rear doors + folding access ramp COMBINED - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross beams therefore high point load - loading area can be lowered hydraulically - mechanical safety locking of the swivel axle in driving mode - with drive-over point at the rear - additional longitudinal struts welded in throughout - storage box at the front - 10 lashing eyes inside the loading area - rear license plate holder - ALKO overrun device and parking brake - ALKO coupling head - very sturdy V-drawbar REINFORCED - automatic reverse drive - 13-pin plug - reversing lights - large reversing light - very stable V-drawbar plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - jockey wheel with central clamp - registration papers: COC papers Accessories can be retrofitted - please enquire: - electric pump instead of hand pump - 100 km/h approval with wheel shock absorbers - lashing rails on the wall - anti-theft device - spare wheel - high tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Cedpfx Aou Hrnrsb Tork

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the usual laser printers - also coloured prints on glass, wood, textiles, plastic, metal and many other materialsNew model: PS1015C M Y K LC LM WhiteDruckkopf: Epson TX8002690 dpi max.inclusive software for printer and image processingDimensions: 2.30*1.98*1.34mWeight: 650kg360 degrees Use: Bottles/round objects (surcharge)A1 Size 100x150cm and 70mm print height possible7x500ml Colour can be supplied! (surcharge) LACK FUNCTION POSSIBLE Software adjustment and printer explanation on request. Germany/Europe-wide. (Surcharge)Print videos etc. can be sent by Mail/WhatsApp... Crodpfjd Ew A Uex Ab Tek

Condition: new, empty load weight: 1,020 kg, maximum load weight: 2,480 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,440 mm, loading space width: 1,570 mm, loading space height: 2,100 mm, loading space volume: 11.4 m³, color: silver, construction height: 2,600 mm, working width: 2,300 mm, lowerable loading platform / manual hydraulics / braked, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. lowerable loading platform / manual hydraulics / braked Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 3.500kg - Unladen weight: 1020 kg - Payload: 2,480 kg - Interior dimensions: 344 x 157 x 210 cm (L x W x H) - Overall exterior dimensions: 510 x 230 x 260cm (LxWxH) - Loading sill height: 44 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, 45mm with clamp - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: multiplex wooden floor - Side walls: sheet steel sandwich 30 mm - Side wall height: 220cm / 210cm clearance height - Chassis: low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: hand pump - Drive-on angle: approx. 6 - Wheel stop: without - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 10 pieces laterally recessed - Winch: at extra charge - Supports: supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Multiplex wooden floor - extremely robust - Sheet steel sandwich 30mm - Rear doors + folding access ramp COMBINED - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross beams therefore high point load - loading area can be lowered hydraulically - mechanical safety locking of the swivel axle in driving mode - with drive-over point at the rear - additional longitudinal struts welded in throughout - storage box at the front - 10 lashing eyes inside the loading area - rear license plate holder - ALKO overrun device and parking brake - ALKO coupling head - very sturdy V-drawbar REINFORCED - automatic reverse drive - 13-pin plug - reversing lights - large reversing light - very sturdy V-drawbar plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - jockey wheel with central clamp - registration papers: COC papers Accessories can be retrofitted - please enquire: - electric pump instead of hand pump - 100 km/h approval with wheel shock absorbers - lashing rails on the wall - anti-theft device - spare wheel - high tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Crsdpfx Asu Hrpijb Tok

Condition: like new (used), Set of six rasps for carpenter's profile sanding machine PS 0 with rasp profile The rasps appear practically as new, see photos. Sold only as a set, no individual sale. Crodpfxow Ni Ege Ab Tjk The machine can be demonstrated onsite by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Crjdpsx A Tzqsfx Ab Tek Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: ready for operation (used), GMN TSE 100scg - 16 000 / 3.7 Spindle SP: 16000 rpm, used, normal signs of wear, 100% functional, scope of delivery as per photos Cedpfx Aeqfub Rob Tork

Condition: ready for operation (used), Rexroth CML40.1-SP-220-NA-NNNN-NW Indra-Contr. MNR.:1070170260-106, used, minor signs of wear, 100% functional, scope of delivery as per photos Codpei Ecqajfx Ab Tjrk

Condition: new, GMN TS 116 cg x 320 WM088447A SP: 8000 rpm SN: R334247, unused in opened original packaging, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping charges. Cjdpfx Abji D U T So Tjrk

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle SP: 12-18-30000 rpm, serial number: R336458, used, normal signs of wear, 100% functional, scope of delivery as per photos Cedpfx Abei Eaa Ho Tsrk

Condition: new, GMN TSA 26x200 L 100120 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Crjdpfx Aei D U Udjb Tok

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 rpm / 37 mounted grinding spindle, shaft diameter: 130mm, step at the front of the thread: 102mm, with test report and installation declaration, new value: €25,000, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Csdoi D U Trspfx Ab Tsrk

Condition: new, GMN TSE 80-16000 / 1.2 high-speed spindle SP: 10-12000 :384568, unused in opened original packaging, 100% functional, scope of delivery as per photos Cjdomq H T Hopfx Ab Terk

Condition: new, GMN TSA 26x200 L 122526 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Csdpji D U Uhefx Ab Terk

Condition: new, GMN TSA 26x200 L 184039 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Crodpfoi D U Ulex Ab Tok

Condition: new, GMN TSA 26x200 L 199209 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Crodpfx Absi D U Upj Tsk