Used Spray Gun for sale (2,834)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: Nedpewc Nvgofx Ahvekw 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machines Conveyor spray processing machines FAPC 3000 The new FAPC have been developed to be used with the latest development, Etching and abating chemistry for the production of printed circuits, metal signs and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Process chamber 450mm Water rinsing chamber 280mm Spray rods - Top 4 process chamber, 1 rinsing chamber Spray rods - floor 4 process chamber, 1 rinsing chamber Nozzle type Poly v-jet - 1/4 revolution removable Nozzles per pipe 3 + 4 for process, 4 for rinsing Nozzles Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control Adjustable over the entire range from above and below. Conveyor speed control High torque. AC drive motor system, powered by a precision inverter with digital displays, for a precise operator reference Speed range 45 mm - 1.6 m / min Temperature range Ambient temperature up to 50°C -1°C Temperature Controller Digital Liquid level sensors For heating and pump Manual reset of overtemperature protection Voltage 220 / 240V 50Hz (13A plug) Dimensions: Height 670mm Depth 670 mm Nkedsd R Trkjpfx Ahvew Length 1430mm including collecting bowl Type: FAPC 3000 Condition: used / used Scope of delivery: (See picture) (Changes and Ir

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Nodpfsw Strcox Ahvekw Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Njdswit Erepfx Ahvekw Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch riveter operating voltage: 400V 50 Hz rated current: 12A Main fuse: 35 A Nksdepfcx Sspfx Ahvjw control voltage: 24 V signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 279 kg year of manufacture: 2012 Type: 9524-640-824-5 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Salt spray chambers: diverse testing possibilities from salt spray test to fully automatic alternating test easy operation by graphical menu guidance customized versions for many applications easy operation via touch panel internal dimensions W x D x H (without hood) 1080 x 675 x 580 mm external dimensions W x D x H 1940 x 900 x 1220 mm Test chamber capacity 500 liters Chamber temperature Rt +5 - 60°C Humidifier temperature Rt +5 - 75°C Mains connection 230V 1P 50/60Hz 2000W Compressed air 4,5 - 8.0 bar / 3Nm³/h Brine supply 140 liters Stainless steel version Nkjdpfx Ahsnr Hi Sevow Refurbished and converted to Comfort control - Renewal of all electrical components - Renewal of all hose connections Type: HK 500 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Ytterbium Fiber Laser. The laser welding gun LSS5 M completes the series as a compact welding tool. With laser powers of one to four kilowatts, integrated cooling technology and convenient control unit this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet pairings or aluminium. Trifocal technology 3500W laser gun Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 - 600 Power requirement 3500 W laser power Laser Duty Cycle 30% (with cooler) 3.5 kW Dimensions, controllerW × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F Nksdpfxjhh H Rms Ahvew 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser welding gun LSS-5M-3500-3F Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Nedpfx Ajpgulashvskw Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V year of manufacture: 2011 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Njdpfx Ajt Igc Sohvjkw Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A Nksdpfxoxg Hrke Ahvjw - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Nksdpfx Ajx Iggyohvew Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: used, Year of construction: 2015, Used Buchi model B-290 glass mini spray dryer. Unit rated 1 kg/hour water evaporation capacity at 220°C maximum air inlet temperature. Heating capacity is 2300 W. Drying tower has inner diameter approximately 150 mm x 485 mm height of straight side. Includes nozzle, seperation flask, cyclone, filter. Nkedpfxex R Talj Ahvsw

Condition: good (used), Paint module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC Price: per piece Quantity: 2 available Nsdpfeb A Rk Tex Ahvekw -Weight: 0.8 kg

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. Nkedpfx Ahjd Hbp Eovjw - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, MSP – Manual Hand Spray Systems The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. Nksdpfx Ahoh E Szmovew The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants.

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm Nkedpfx Aohbyr Sehvew g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1624x950x2345 mm Nodpfx Ahjvz El Novjkw Weight 0 kg Total power requirement 1,5 kw

Condition: excellent (used), functionality: fully functional, throat depth: 160 mm, type of cooling: water, Equipment: documentation/manual, Hand-operated, water-cooled spot-welding gun Make DALEX type 3116 Connection 400 V 50 Hz Rated power at 50 % duty cycle: 6.35 kVA Sec. short-circuit current: 8.3 kA Electrode force: 180 daN Arm spacing: 120 mm with 5 m connection cable with control cable Nedpjr Iynfjfx Ahvskw with asynchronous welding control RA (RB 11) 8 step switches for power control Current time: 2-100 per little used from school operation

Condition: new, SprayClean Front Loading Spray Washing Machines Nkjdpfs T D R Dox Ahvsw SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Nksdpfxoxzprco Ahvow Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: Njdpfx Ahex Ig Tmjvskw - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Nsdsxxuytjpfx Ahvokw This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ Nedpfx Askwct Uehvekw ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ 12-Weeks delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ MULTI-TREAT SPRAY PRE TREATMENT MACHINE ✅Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It provides the possibility of working up to 8 different chemicals with tanks in varying numbers according to the process. All tanks are made of 316 SS and isolated. According to the process steps, the number of tanks and how many tanks are heated are determined. ✅The heating inside the tank is provided by gas heat exchangers. The processes can be monitored, times and temperatures of all processes can be adjusted via the Plc touchscreen. ✅Any failures that may occur in the system can be observed from the electrical panel. ✅Automatic floats in tanks, stop the system automatically when there is not enough water or chemicals in the tanks and the amount of liquid is automatically supplied by transferring between the tanks and the system stays safe. ✅Under all tanks there is leakage pool. Leakage pool has made from 316 SS. Tanks are made of 316 Quality 2 mm Stainless Steel. The material is passed through penetration tests made of argon welded and sealed. The grids inside the tank prevent mud access to the pumps. ✅The cabin interior consists of sandwich panels 304 stainless steel and the exterior is made of powder coated sheetiron. ✅Panel thickness is 80mm. It comes from polyurethane filled stainless steel panels. PPT ring pipes and nozzles provide long life usage. Nsdsfggcwspfx Ahvekw ✅Thanks to the steam suction fan, vapor diffusion into the working area from the system is prevented. The washing machine doors are container type and they are sealed with silicone gaskets. ✅The movable washing platform in the cabin moves back and forth through the cabin to wash the materials. The hoses are carried by the mobile carrier system. There are separate pumps for every processes and 1 waste pump for discharging liquids from the tanks. Discharging pump will be connected to chemical discharging tank. ✅The machine floor is designed to be inclined towards the pool discharge area. ✅There are manual application liquid spray guns for every processes for manual usage. System has manual mode for pretreatment. Dripping time and process time can adjusted from the PLC panel and dripping time is valid for manual application.

Condition: new, Year of construction: 2026, Dowel inserting machine with gun for simultaneous glue and dowel insertion. For professional and efficient dowel processing in furniture and framework. Short introduction: • Constant outstanding dowel length projection • Always constant and correct glue amount • Simple cleaning of the gluing system through EasyClean, the automatic cleaning program Nsdpfx Ahjdx Abuovekw • Automatic rejection of dowels with the incorrect diameter and length through Auto-DL-Selekt • Dowels are not inserted to the bottom of the hole, the outstanding dowel length projection is adjusted independent to the drilling depth • Recoilless, extra light and comfortable glue-dowel-inserting-gun • Great time saver compared to squeeze glue bottle and hammer