Used Spot Plate for sale (13,471)

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 31 kg, total height: 350 mm, total length: 430 mm, total width: 350 mm, Plattenfilter FP-10 with Pumpe ist ein compactes, halbprofessionelles Gerät zur Filtration verschiedener Flüssigkeiten, insbesondere pflanzlicher Öle. Mit einer Leistung von bis zu 25 Litern pro Stunde ist es die ideale Lösung für den Hausgebrauch und kleine Manufakturen. Dank seiner geringen Abmessungen und der einfachen Handhabung kann es als tragbares Alltagsgerät verwendet werden, das lediglich eine regelmäßige Reinigung erfordert. Das Herzstück des Geräts ist eine selbstansaugende Drehkolbenpumpe, hergestellt von der italienischen Company ROVER POMPE SNC in NOVAX-Technologie. Diese hocheffiziente Pumpe ist mit einem sternförmigen Rotor ausgestattet, der den Flüssigkeitsfluss in beide Richtungen ermöglicht. Durch ihre spezielle Hydraulikkonstruktion kann die Pumpe auch in Anwesenheit von Luftblasen arbeiten, was einen continuierlichen und stabilen Betrieb gewährleistet. Alle flüssigkeitsberührenden Oberflächen sind sorgfältig bearbeitet, was ihre chemische und mechanische Beständigkeit erhöht und zugleich Lebensmittelsicherheit bietet. Die Pumpe fördert die Flüssigkeit zum Filterblock, in dem die Filterplatten eingesetzt sind. Das System kann 6 bis 10 Filtereinsätze aufnehmen, was die Filtrationsleistung erhöht. Die Platten sind parallel geschaltet, um die Effizienz bei der Entfernung von Verunreinigungen zu maximieren. Für die optimale Filtration von Pflanzenölen wird die Verwendung von Filtern mit einer Durchlässigkeit von 45 Mikrometern empfohlen, sowie das Halten der Öltemperatur bei etwa 35°C, um einen besseren Durchfluss und Reinigungseffekt zu erzielen. Vor dem Filterblock befindet sich ein Manometer, das die Überwachung des Drucks und die Beurteilung des Zustands der Filtereinsätze ermöglicht. Bei einem deutlichen Druckanstieg zeigt das Manometer die Notwendigkeit eines Filterwechsels an. Das FP-10-Set erlaubt das Abtrennen des Schlauchs zwischen Pumpe und Filterblock, sodass die Pumpe auch für andere Aufgaben der Flüssigkeitsförderung verwendet werden kann. FP-10 ist ein zuverlässiges Gerät für die Kleinmengenfiltration von Flüssigkeiten, das Leistung, Benutzerfreundlichkeit und hohe Verarbeitungsqualität vereint. Technische Daten: Länge: 43 cm Breite: 35 cm Höhe: 35 cm Dujdpfjwhw Arox Ac Njn Gewicht: 31 kg Product type: Kompakte Industriefilter zur Flüssigkeitsfiltration Einsatzbereiche: Zur Reinigung verschiedener Flüssigkeiten in der Lebensmittel-, Chemie-, Pharma- und Kosmetikindustrie Antriebsart: Elektrisch Leistung: bis zu 25 Liter pro Stunde Motorleistung: 0.5 kW

Condition: good (used), APV Heat Exchanger. Type : N35. Duedperwl I Hjfx Ac Non Normal capacity : 6.5m3/H. Transmission surface : 67,9m2. Working pressure : 6bar. Test pressure : 6bar. Volume, Side 1 : 94liter. Volume, Side 2 : 94liter. Working temperature, MAX/MIN. Degrees Celsius. 120/0. ORA.18

Condition: good (used), functionality: fully functional, Year of construction: 1983, We are selling a used guillotine shear from the manufacturer Digep DLB 4 3050. The machine is fully operational, connected to power, and fitted with sharp blades. Technical specifications: - Sheet thickness: 4 mm - Sheet width: 3050 mm - Machine dimensions: 3.7 x 2.1 x 1.4 m Dujdpfx Acsw Rdzle Nsn - Machine weight: approx. 4.65 t The price is ex works loaded at the location in Werdau.

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - CNC-controlled motorized cutting gap adjustment via upper knife (up to VS 4013) - CNC-controlled motorized cutting gap adjustment via lower knife (patented) (from VS 4016) - Plastic inserts for downholder (material protection) - variable cutting length adjustment via CNC - Cutting reel adjustment via CNC - Table plates with ball rollers - backgauge on ball screws 1000 mm - folding up finger guard to 1000 mm - 1 side stop L= 1500 mm, with scale, T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop (up to VS 3020) - 3 support arms L=1000 mm, with T-slot & tilt stop (from VS 4006 to VS 4020) - 5 support arms L=1000 mm, with T-slot & tilt stop (from VS 6006 to VS 6016) - Cutting line illumination - Upper and lower knife can be rotated four times (4 sides can be used) Special accessories: - Light curtain for finger protection - throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Sheet metal holding device with conveyor belt and scrap container - CNC material feeding system - rear sheet metal chute - backgauge 1250 mm - Hydraulically liftable backgauge - X1, X2 axis control - adjustable angular stop 0-180 - additional supporting arm L= 2 m with vertical support - additional support arm L= 3 m with vertical support - extension arm L= 2 m with vertical support Duodpfx Acsn Ut Sts Nen - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot and vertical support - Ball in side stop or support arms - CNC front feed system for 3 meters - Laser cutting line - Spare knife (standard upper and lower knife) - Spare knife (upper and lower knife especially for stainless steel) - Oil cooler - Hydr. twist minimization for narrow sections - Central lubrication manual - Central lubrication motorized - Special painting - Control panel on the other side - Oil heating - Control panel air conditioning control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - throat 50 mm - Backgauge with ball screw 1000 mm - Plastic inserts for hold down (material protection) - 1 side stop L= 1500 mm, with scale & T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop - Table plates with ball rollers - Infinitely adjustable cutting length - manual cutting gap adjustment - automatically tiltable backgauge - cutting line illumination - upper knife can be rotated twice and lower knife four times special accessories: - Light curtain for finger protection - throat 350 mm - Throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Rear sheet guide - Back gauge 1250 mm - Hydraulic anti-rotation device for SBT 3016 and SBT 4013 - additional supporting arm L= 2 m with vertical support - additional supporting arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot with vertical support - ball in side stop or in support arms - adjustable angle stop 0-180 - CNC controlled motorized cutting gap adjustment - laser cutting line - spare knives - 1 set of upper and lower knives - oil cooler - special painting - Control panel on the other side - oil heating - control panel air conditioning DURMA D-Touch 7 Dodpfon Urhvox Ac Njun 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input DURMA D-Touch 7 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input Control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: good (used), functionality: fully functional, Year of construction: 1990, We are selling a used guillotine shear from Stanko with a cutting width of 2000mm and a material thickness of 6mm. The machine is powered and can be tested. Crane loading is possible. Dedpfx Acswywmhe Noun

Condition: used, Year of construction: 2001, - Rated power 100 kVA - Connected power 275 kVA - Incl. HELLER cooling unit - Weight approx. 800 kg Dusdswgb I Aspfx Ac Nen

Condition: new, Standard equipment - EZM9910 control unit (standard on MS 2004, 2504, 3004) - 550 mm manual backgauge (standard on 1303, 2003, 2525) - 750 mm motorized backgauge programmable via control unit (standard on 2004, 2504, 3004) - plastic inserts for hold-downs (material protection) - 1 side stop and 2 sheet support arms - finger protection - portable foot switch with emergency stop - spring-loaded stop in T-slot of support arms (standard on MS 2004, 2504, 3004) - ball screw (standard on MS 2004, 2504, 3004) - Table plates with ball rollers (standard on MS 2004, 2504, 3004) - Upper and lower knife can be rotated twice (MS 1303, 2003, 2525) - Upper knife can be rotated twice and lower knife four times (MS 2004, 2504, 3004) Optional accessories: - D-Touch 7 touch screen CNC control unit - 750 mm motorized backgauge programmable via control unit (option on MS 1303, 2003, 2525) - 1000 mm motorized backgauge programmable via control unit - pneumatic sheet holding device - adjustable angle stop 0-180 - additional support arm L= 2 m with vertical support - additional supporting arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support Dodpfx Aon Tpifsc Njun - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Cutting line light (for MS 2004, 2504, 3004) - Spare blades 1 set of upper and lower blades - special painting control unit: EZM9910 control unit (standard on MS 2004, 2504, 3004) DURMA D-Touch 7 (option) - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - User friendly - Fast data input - Easy connection - Unlimited material types Are you interested in this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is dismantled on stock, it is fully functionable. Dsdjuplptspfx Ac Nsun

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Dsdjx Enfxopfx Ac Neun Number of rolls: 4 Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Pre-bending: Yes

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm Dodpfexzvp Uox Ac Neun

Condition: new, Year of construction: 2025, neu 2025 090120 prompt, Zwischenverkauf v Türkei 7100 € 137.03 € 1 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch Djdpfx Ajwira Iec Njun conical rolling device user manual in GERMAN

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions Dedsycxgmspfx Ac Noun

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg Djdpfjwyktnex Ac Nsun - Documentation available: No - CE certificate present: No - Serial number: 4234 - Power: 450.0A - Power: 50.0kVa - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch Dujdsycv Saspfx Ac Nen - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: good (used), Round bending machine with hand crank operation, max. working width 2 m, old, stable and heavy cast iron machine. Duodpfx Aeyf Uahec Non

Condition: good (used), Bending bench - folding machine from top manufacturer Cidan (one of the largest companies in this sector) Schechtl KSV 250 (pictures to follow) Bending length just over 2.5m Sheet thickness up to 1 mm – more for aluminum, etc. Working width just over 2.5m Duodpfjrwnnrsx Ac Nsn Optional various rails or back gauges Sheet metal tray Guillotine shear by Schröder (almost identical to Schechtl, just a bit more expensive) Back gauge Extendable sheet support Cutting possible on both the left and right sides Special feature – reversible blade (not available with Schechtl) Bending bench can also be purchased individually Loading is possible free of charge with a forklift; weight is estimated at over 800 kg

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel Dujdpjyckt Eefx Ac Nsn

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage Dujdpfx Aoycktrsc Nen TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate Duedsb A Nbnspfx Ac Nsn -Weight: 1050 kg

Condition: excellent (used), 1 Type: Heavycut 4.2 Duodpfeyf H Htjx Ac Nsn X=11000, Y=4500, Z=2500, V=1000, W=1200, B=table rotation, 100, 0 BW2 / H5 1 clamping table 2500x3000, 22.0 t 2 plate fields 2500 x 7000 each 15.0 to 30 t 2 plate fields 2500 x 3500 each 7.5 to 15 t Total 167 t

Condition: good (used), total height: 800 mm, total width: 650 mm, total length: 2,200 mm, Used SEITZ ORION plate filter, equipped with 50 plates measuring 400 × 400 mm, designed for filtration of wines, juices, musts, and other food-grade liquids. This high-capacity model is particularly suitable for professional wineries, wine merchants, or food processing sites seeking a large filtration area in a widely used standard format. The robust construction of the filter, combined with a mechanical screw clamping system, ensures excellent stability during operation and reliable use over extended filtration cycles. The filter is compatible with standard 400×400 filter sheets, which are readily available on the market. TECHNICAL SPECIFICATIONS Djdpsyf Hndofx Ac Njun - Brand: SEITZ ORION - Type: horizontal plate filter - Number of plates: 50 - Plate size: 400 × 400 mm - Structure: stainless steel frame and plates - Clamping: mechanical screw - Instrumentation: pressure control manometers - Connections: stainless steel - Mobility: rolling chassis Applications: - Wine filtration (clarification, pre-bottling filtration) - Juices and fermented beverages - Food industry applications - Regular filtration or as an addition to an existing filtration line This SEITZ ORION 400×400 plate filter – 50 plates – is an economical, reliable, and immediately operational solution for professionals needing high filtration capacity without the investment in new equipment. DIMENSIONS - Length: 2,200 mm - Width: 650 mm - Height: 800 mm Balanced format, offering high filtration capacity while remaining compatible with integration into existing cellars or workshops. ANNEXES - 6-month warranty - CE compliant

Condition: good (used), Used SCHENK plate filter, fitted with 9 plates in the 400 × 400 mm format, designed for filtration of wine, juice, must, and food-grade liquids. This compact model is particularly suitable for small to medium-scale production, filtration trials, or occasional clarification operations. Its robust construction, combined with a mechanical screw-type tightening system, ensures stable operation and easy daily use. The filter accommodates standard 400×400 filter plates, which are readily available on the market. TECHNICAL SPECIFICATIONS - Manufacturer: SCHENK - Type: Horizontal plate filter Djdpfx Aceyf Hlps Njun - Number of plates: 9 - Plate size: 400 × 400 mm - Structure: Stainless steel frame and plates - Clamping: Mechanical with central screw - Instrumentation: Pressure control gauges - Connections: Stainless steel - Mobility: Mounted on wheeled frame CONNECTIONS AND INSTRUMENTS: - Inlet/outlet connections: DIN 50 - Inlet/outlet pressure gauges - Sampling valves - Drain valves ADDITIONAL INFORMATION: - Filtered liquid: WINE DIMENSIONS: - Overall length: 1100 mm - Overall width: 500 mm - Overall height: 840 mm Compact footprint, easy to install in any existing winery or workshop. ADDITIONAL ITEMS: - 6-month warranty - CE compliant

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Storage location: Bad Wimpfen Duedpsv T Ilvsfx Ac Njn

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Duedpfx Aex Dd Hyec Non Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm