Used Splitting Wedge for sale (992)

Condition: used, load capacity 25,000 kg freestanding insulation plate and anti-slip plate on the underside anti-slip plate on the upper side construction height 88 mm in middle position adjustment range 13 mm dimensions 370 x 230 mm weight 31.8 kg - new - unused - 21 units on stock  Ndsdpfjfii Dmox Af Eoc price per unit    

Year of construction: 1991, condition: used, - Grooving saw unit: controlled (on and off) - Main saw unit - Note: This machine has been specially built for grooving and ripping drawer fronts. In general, panels can be grooved or split. Ndodpsb Scc Defx Af Eoc

Condition: refurbished (used), Long cut wedge saw Mitre adjustment via stop arm and staking out holesMachine with two-hand safety controlSaw blades up to diameter 800mmSuction nozzles at relavant pointsHorizontal and vertical workpiece clampsSaw blades, suction systems and roller conveyors/length stops on request. Ndedpfx Asd Szf Rjf Esc

Year of construction: 2015, condition: good (used), Francis Overall automatic rotary cutter with infeed system and exit conveyor. Cutting 3 across. On a s/s mobile platform. Dimensions approx. 1.5 m x 1.9 m x 2.1 m high. Njdjpz I Nvepfx Af Ejdc

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 900 mm, turning diameter: 300 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 270 mm, controller model: FANUC 31i-B, TECHNICAL DETAILS Swing diameter over bed: 780 mm Nodpfx Ajxltbcof Eedc Swing diameter over slide: 700 mm Maximum turning diameter: 300 mm Maximum turning length: 900 mm Bar capacity: 76 mm Spindle Chuck size (main/sub-spindle): Ø254 mm Spindle bore (main/sub-spindle): Ø86 mm Spindle speed: 4,000 rpm Spindle motor (max./continuous): 26 / 15 kW Spindle drive: integrated motor Spindle flange: A2–8 C-axis indexing: 0.001° Travel axes X1/X2 axis: 270 / 190 mm Z1/Z2 axis: 920 mm Y axis: ±120 mm Rapid traverses Rapid traverse speed X/Y/Z axes: 24 / 24 / 24 m/min Rapid traverse speed ZB axis: 12 m/min Guideway system: Box Guide Turret Tool stations: 2 × 12 External tool size: Ø25 mm Internal tool size: Ø40 mm Indexing time: 0.2 s/step Turret system: Wedge type Driven tools Motor power (max./continuous): 5.5 / 2.2 kW Tool speed: 4,000 rpm Collet size: Ø20 ER32 Tool type: BMT65 MACHINE DETAILS Control: FANUC 31i-B Tank and supply system Coolant tank: 230 l Lubrication tank: 8 l Electrical data Power consumption: 69 kVA Line voltage: 220 / 400 V Dimensions & weight Dimensions (L × W x H): 3,670 × 2,170 x 2,601 mm Weight: 11,000 kg EQUIPMENT LNS bar feeder

Condition: new, functionality: fully functional, Year of construction: 2025, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials. Ndedpfx Asvn D I Nef Eoc

Condition: used, Year of construction: 2006, centre height 165 mm centre distance 750 mm turning diameter over bed 320 mm turning diameter over slide 150 mm turning length 750 mm spindle taper KK 6 DIN 55027 control MANUALplus 4110 HEIDENHAIN bed width 360 mm spindle bore 50,8 mm turning speed range 10 - 4000 U/min rapid travel - longitudinal/face 10 / 8 m/min 3-jaw-chuck diameter 200 mm SCHUNK quick change toolholder MULTIFIX Typ B drive capacity - spindle motor 9 kW taper in tailstock-quill MK 5 dia. of quill 70 mm quill stroke 120 mm voltage 400 V total power requirement 14 kVA weight of the machine ca. 2,0 t dimensions of the machine ca. 2,45 x 2,10 x 1,85 m Machine from training department. Only 4.488 Power-On hours! Excellent condition! - Serial No.: Power On: 4.488 h Ndsdpfxoxqrdgo Af Eoc - CNC-Control MANUALplus 4110 - 3-Jaw-Chuck (Wedge type) SCHUNK ROTA-Plus 200-52 - Quick change tool holders MULTIFIX Size B - Coolant equipment - 2-step spindel gear

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Ndjdpfxowtct He Af Esc Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x bezel Ø 100mm closed *

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 Nsdpfovuugijx Af Eodc with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - maximum thickness of the workpiece: 200mm *Top section: - anti-kickback fingers - feed shaft, toothed, sequential (split, sectional) - pressure elements Njdpfx Asw Elqfjf Eodc - planing shaft - pressure elements - smooth outfeed, feed shaft *Bottom section: - smooth sliding shaft at the infeed - smooth feed shaft at the outfeed - adjustable rollers in the lower table - electric table height adjustment - main motor 7.5kW - stepless feed speed adjustment 8-24m/min - extraction port diameter 180mm - dimensions L/W/H 1400x1100x1650mm - weight 1650kg Net price: 17,900 PLN Net price: 4,210 EUR at the exchange rate of 4.25 PLN/EUR (Prices may change with significant rate fluctuations)

Year of construction: 2023, condition: new, ! Machine offer for customers in Lithuania / Latvia / Estonia. The LVD PHOENIX laser is fiber laser cutting machine which combines high dynamics with flexibility for cutting thick material. PHOENIX is available in different sizes: 3m x 1,5 m, 4m x 2 m and 6m x 2m. Power source varies from 4kW to 20 kW. As standard machine is equipped with automatic shuttle tables, cutting head, adaptive collimation unit (until 12kW), capacitive height sensing, automatic nozzle cleaning, automatic sheet referencing, automatic cutting gas selection (oxygen, nitrogen and compressed air), chiller and fume extraction, SIEMENS control unit. The PHONEX laser cutting machines are compatible with huge range of automatization solutions such as loading / unloading and sheet storage (up to 6 meters), nozzles changer. Nodpsiy N Npofx Af Esdc Shuttle table All PHOENIX lasers come with automatic shuttle tables. The height of the table is 930 mm. The speed of table change depends on laser size: for 3015 – 35 sec., for 4020 -39 sec. and for 6020 – 48 sec. Tables on PHOENIX 4020 and 6020 models are split into 2m x 1m modules for easy replacement. Cutting head Laser source power on PHOENIX laser cutting machines varies from 4 to 20 KW (available: 4kW, 6kW, 10kW, 12kW, 20kW). The cutting head for 4 – 12 kW lasers could be equipped with 150 or 200 mm focusing lens, for powerful 20kW lasers – 250 mm focusing lens are used. Frame The PHOENIX 3015 model has a welded steel mono frame construction. This allows high accelerations without losing the accuracy. Due to the high frame rigidity, no special foundations are requested. The frame of PHOENIX 4020 and 6020 exists out of 4 parts. One rigid left and right frame that are connected with two bolted beams.

Condition: used, mileage: 31,000 km, power: 120 kW (163.15 HP), fuel type: gasoline, gearing type: mechanical, first registration: 03/2023, next inspection (TÜV): 03/2026, emission class: euro6, color: silver, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, second-hand vehicle warranty, Special equipment: Ndedownkzhopfx Af Ejc Equipment package: Business, driver assistance system: traffic information system live traffic, black headliner, metallic paint, parking package, tire repair kit (Tirefit), split/foldable rear seatback, seat comfort package, mirror package Other equipment: Deactivatable passenger airbag, driver/passenger airbag, exterior mirrors electrically adjustable and heated, both, front pelvis airbag (Pelvisbag), DAB tuner (digital radio reception), design and equipment line standard, driver assistance system: Agility Select / Dynamic Select (driving mode switch), driver assistance system: active brake assistant, driver assistance system: active lane keeping assistant, vehicle setup (online services / apps), vehicle monitoring (vehicle locating system), electric windows front + rear, velour floor mats, double front cup holder, body: 5-door, Keyless Go start system, automatic climate control (Thermatic), driver knee airbag, comfort suspension (Agility Control), communication module (LTE) preparation Mercedes me connect, head airbag system (windowbag), (sport) steering wheel with multifunction, light and sight package, Mercedes-Benz emergency call system, engine 1.3 ltr. - 120 kW CAT, multimedia system MBUX (digital multimedia system), tire pressure monitoring system, low emissions according to Euro 6d emissions standard, side airbag (sidebag) front, voice control system extended functions (MBUX), steel rims 6.5x16, start/stop system, touchpad (center console), USB port in rear

Condition: used, mileage: 155,000 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, first registration: 12/2018, next inspection (TÜV): 12/2026, emission class: euro6, color: silver, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Special equipment: Ndjdpexq Ngljfx Af Eoc Audio navigation system Navi RF 900 Europe Touch (IntelliLink 8" display), Bi-LED headlights with adaptive light distribution (AFL), ergonomic seat front right, color display (4.2 inch), front camera, rear headrests (3x), alloy wheels 7.5x19 (5 double-spoke), metallic/mineral effect paint, premium package, spare wheel with standard tire (steel), reversing camera, electric sliding/tilting glass sunroof, visibility package, BOSE sound system, auxiliary heater/parking heater, tinted thermal insulation glazing at the rear (Solar-Protect). Additional equipment: Third brake light, driver/passenger airbag, audio controls on steering wheel, body-colored exterior mirrors, outside temperature display, onboard computer, brake assist, roof antenna, silver roof rails, rev counter, automatic headlight activation, Quickheat electric rapid heating, driver assistance system: hill start assist (HSA), electric windows front and rear, black window trim strips, Bluetooth hands-free system, heat-insulating windshield (Solar-Reflect), luggage net/pocket on front seat backrest, Isofix child seat mountings on rear seat, 5-door body, curtain airbag system, cargo cover, engine 1.6 l - 100 kW CDTI DPF, multimedia interface (USB/AUX-IN), wheelbase 2555 mm, tire pressure monitoring system, split/folding rear seat, front side airbags, black side protection moldings, height-adjustable driver seat, seat cover/upholstery: fabric, sun visors with illuminated mirror, body-colored exterior door handles, seat belt warning system, passenger side, seat belt warning system, driver side, heat-insulating glazing.

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) Ndsdpfx Asu Ndhiof Eoc axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² no. of straightening rolls 9 number of draw-in rolls 2 speed 0 - 80 m/min Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll Ndedsvut Hzopfx Af Eoc

Condition: used, mileage: 304,000 km, power: 143 kW (194.43 HP), fuel type: diesel, gearing type: automatic, first registration: 12/2019, next inspection (TÜV): 12/2027, emission class: euro6, color: silver, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, E 220 CDI/ 4 Matic/ GREAT CONDITION!!! Nedpfxewh D Ege Af Eedc Storage package, ashtray instead of storage compartment, exterior mirrors with blind spot assist, Avantgarde interior, tires with runflat system, DAB tuner (digital radio reception), interior: black fine ash wood, connectivity package, enlarged fuel tank, 7.5x17 (5-spoke) alloy wheels, media display, metallic paint, black fine ash wood center console, Garmin MAP Pilot navigation module, parking package, heated windshield washer system, electric tilt/slide sunroof (glass), heated front seats, integrated smartphone, mirror package, navigation system preparation (Garmin MAP Pilot), mobile phone/convenience telephony/LTE-capable, adaptive brake lights, passenger side airbag with deactivation, driver/passenger side airbag, Audio 20 audio system (with color display), exterior mirrors in body color, front pelvis airbag, design and Avantgarde equipment line, driver assistance system: Agility Select / Dynamic Select (driving mode switch), driver assistance system: active brake assist, driver assistance system: Attention Assist (drowsiness detection sensor), electric windows front and rear, luggage/cargo cover including safety net, enlarged urea tank (AdBlue), tailgate with automatic opening and closing system, LED rear lights, Isofix mounts for child seat on rear seat, body: 5-door, KeyFree start system, automatic climate control (Thermatic 2-zone), driver's knee airbag, communication module (LTE) preparation for Mercedes me connect, head airbag system in front, multifunction steering wheel, Mercedes-Benz emergency call system, engine 2.0 Ltr. - 143 kW CDI KAT, PRE-SAFE system, tire pressure monitoring system, split / folding rear seat backrest, low emissions according to the Euro 6d-TEMP emissions standard, SCR system (AdBlue technology), Side airbag (sidebag) in the front, electrically adjustable front seats, socket (12V connection) in the trunk/cargo area

Condition: good (used), operating hours: 8,661 h, Cosen AH-300H Automatic Horizontal Bandsaw Ndedpfoxq Ap Hjx Af Esc Variable Speed Drive, 27-80 Metres/Minute; Auto Hydraulic Blade Tensioner; Split Vice Jaw; 5HP Motor, 415 Volt. 8661 Blade Size 12'6" Long x 1.1/4" (34mm) Wide; Weight Approx 1,500kg; Maximum Material Size to Cut: Round & Square 300mm, Rectangular 300mm x 340mm; Feed Table with Dimensions Approx 400mm Wide x 2 Metres Long; Enclosed Safety Cage;

Condition: used, mileage: 132,000 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2019, next inspection (TÜV): 05/2025, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Bluetooth interface for mobile phone, floor covering at the front and in the passenger/loading area (rubber), rear parking aid, folding radio keys (2), car registration, spare wheel in driving tires (steel), heated windshield washer nozzles, height-adjustable front left seat, heated front seats Other equipment: NP 27151¤ NET 2 folding radio keys * Rubber floor covering in the driver's cab and loading/passenger area * Rubber floor covering in the loading/passenger area * Height adjustment for the left seat in the driver's cab * Air conditioning including glove compartment with lockable flap, lighting and cooling * Tow bar material * "Premium" multifunction display and fatigue detection * Multifunction leather steering wheel (3 spokes) with control option for radio, multifunction display and mobile phone * "Discover Media" navigation system with 4 speakers * Fog lights * Without lettering for type and engine designation and without campaign lettering and -sticker * ParkPilot in the rear area * Windscreen washer nozzles at the front, heated * Seat heating for seats in the driver's cab, left and right, separately adjustable Nodpfx Aev D Sr Ijf Ejdc * Sortimo special installation * Steel spare wheel with driving tires including on-board tools and jack 2nd row of seats bench (3 seats), 3rd brake light, airbag on passenger side, airbag on driver's side, traction control (ASR), equipment package: BlueMotion Technology, aspherical outside mirror, left, outside mirror electrically adjustable and heated, convex outside mirror, right, outside mirror, version: commercial vehicle, BlueMotion Technology, brake assistant, comfort headliner at the front, roof rails/roof rack preparation, EcoProfi, electronic. Differential lock (EDS), driving assistance system: hill start assist, driving assistance system: multi-collision brake (multi collision brake), tinted laminated glass windscreen, glazed tailgate, heated rear window, interior filter: dust and pollen filter, dimming interior mirror, body/structure: station wagon, mechanical steering column (steering wheel). adjustable, height/length adjustment, engine 2.0 ltr. - 75 kW TDI, engine drag torque regulator (MSR), non-smoking package, standard payload, wheelbase 3006 mm, tire pressure indicator, rear seat split/foldable, low emissions according to Euro 6d-TEMP emission standard, windshield wipers with interval switching, halogen headlights H4, sliding door on the right, SCR system (AdBlue technology), front side airbag with head airbag unit, side window in the loading/passenger compartment at the rear left, fixed, side window in the loading/passenger compartment at the rear right, fixed, side window in the loading/passenger compartment at the front left, fixed, side window in the loading/passenger compartment at the front right, fixed, side protection strips, rear seat belts with belt tensioners, front seat belts with belt tensioners, height adjustable, front left seat with backrest release, front right seat, seat cover/upholstery: fabric, steel rims 6x15, Start/Stop system, first aid kit and warning triangle, warning system for front seat belts, green tinted heat-insulating glazing

Condition: good (used), Thickness planer Panhnas 630 Max. planing width: 630mm Max. planing height: 250mm Motor: 7.5 kW 2 feed speeds 4 traditional knives (wedge-mounted) Electric and manual table adjustment Split, swiveling infeed roller Rollers in the bottom table Machine checked, ready for operation Nodjxqxv Nopfx Af Esdc

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m Nodpfxsva Hige Af Esdc This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Spindle length 120,320,125 mm weight 2500 kg loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Ndedpfexpi Elox Af Ejc Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: used, mileage: 57,000 km, power: 145 kW (197.14 HP), fuel type: diesel, first registration: 09/2021, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Special equipment: Semi-electric tow bar, Bluetooth hands-free system incl. audio streaming, air ionizer (enhanced interior air purification), comfort seats, fuel tank: 71 L, Park Assist Package, emergency spare wheel, smartphone interface (Apple CarPlay & Android Auto) Ndedpfxsxarf Ae Af Ejc Additional equipment: 3rd brake light, passenger airbag, passenger airbag deactivatable, driver airbag, all-wheel drive, chrome side window trim, dual exhaust system (left/right) with chrome tailpipes, exterior/interior mirrors with auto-dimming, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both sides), wide-angle exterior mirrors, outside temperature display, automatic tailgate operation, LED indicators integrated into exterior mirrors, onboard computer, aluminium-look roof rails, digital package, digital instrumentation 12.3" display (2nd generation), twin tailpipe exhaust system, door sill trims with aluminium inserts, electronic differential lock: Corner Traction Control (CTC) with torque vectoring, first aid kit, driver assistance package: Safety Assistance, driver assistance system: Hill Descent Control (HDC), driver assistance system: Hill Start Assist (HSA), driver assistance system: brake assist, driver assistance system: drive mode selector, driver assistance system: high beam assist, driver assistance system: multi-collision brake, driver assistance system: Run-off Road Protection, electric windows front & rear, luggage compartment net, luggage cover / roller blind, automatic transmission – Geartronic (8-speed), heated rear window, rear spoiler, infotainment system: Android (DAB+) with High Performance Sound, interior trim: Iron Ore decorative inlays, Isofix child seat mounts, body: 5-door, 2-zone automatic climate control, driver knee airbag, front comfort seats (textile), head airbag system, rear head restraints foldable electrically, loading sill protector (aluminium), electrically adjustable lumbar support (front), multi-function steering wheel, height-adjustable steering column, reach-adjustable steering column, alloy wheels, air quality monitoring system (Clean Zone Interior Package CZIP), illuminated vanity mirrors, mild hybrid 145 kW (engine 2.0 L – 145 kW diesel), rear centre armrest with cup holder, model revision, LED fog lights, rear fog light, electric parking brake, wheelbase 2865 mm, tyre repair kit, tyre pressure monitoring system, split-folding rear bench seat, folding rear seat backs, low emissions per Euro 6d standard, LED headlights with adaptive light distribution (Intelligent Light System), whiplash protection system (WHIPS), front side airbags, windshield mist sensor, front seat belts height-adjustable, height-adjustable front seats, start/stop system, 12V power socket in luggage compartment, luggage compartment bag hook, 2x USB sockets in rear, Volvo ON CALL, seat belt warning system for front and rear.

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Njdpfxjuiy Nge Af Ejdc Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Tool ejection via expulsion wedge Equipment: Ndsdpevhbpqofx Af Ejc Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: refurbished (used), Year of construction: 2024, Eisele VA-L-350 Retrofit Fully automatic high-performance sawing machine with feed chain magazine for non-ferrous metals and plastics Manufacturer: Eisele Type: VA-L-350 Overhaul year: 2024 Saw blade, carbide: 350-400 mm Drive power, saw motor: 15 KW Saw motor speed: 1500 - 6000 min-1 Saw blade cutting speed: 1650 - 7500 m/min Saw blade feed steplessly adjustable: hydraulic Saw height control infinitely variable: fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 200 x 100 mm Working range round 90° max.: 130 mm Feed length single stroke: 5-900 mm Nsdpfjuizlpox Af Esdc Multiple stroke 5-9999 mm Feed speed servo-controlled feed unit: 350 mm/s Compressed air connection on site: 6-8 bar Weight (saw)approx.:1600 kg (magazine)approx.:2200 kg (optional) Dimensions LxWxH (saw)approx.: 1800mm x1300mm x1950mm (magazine)approx.: 7300mm 3900mm x1200mm (optional) Installation dimensions LxWxH approx.: 9200mm x4800mm x2800mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The PLC control system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces the resulting noise emissions to a minimum. The machine is overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 - Renewal of the ball screw drive - New hydraulic lines (hydraulic version) - New pneumatic lines (pneumatic version) - New pneumatic and/or hydraulic components - Overhaul of the control valves - Optimization of the suction performance - Overhaul of the Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the cab - Replacement of all bearings and wear parts - Replacement of servo and frequency converter The machine is also equipped with - Reinforced motor 15 KW - Minimization of the material residue - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Hydraulic clamping system - Flat magazine for automatic feeding of primary materials up to 6 m long - Roller conveyors on the infeed side - Roller conveyors on the outfeed side - Delivery and installation on your premises - Training of your employees