Used Split Saw for sale (6,262)

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, overall weight: 4,200 kg, The machine functioned perfectly until it was taken out of service. Currently, it has the following fault: motor protection switch 018. Loading onto a truck is possible! Cedpfxoz E A U Aj Abaehd

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 4 kW (5.44 HP), cutting height (max.): 105 mm, cutting width (max.): 900 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, saw blade bore: 30 mm, total length: 2,000 mm, overall weight: 450 kg, Panel saw FELDER, model K700, year of manufacture 2005, with scoring saw and tilting saw blade. Sliding table 2000 mm, condition: almost new. Codps Ah Iazefx Abashd

Condition: reconditioned (used), Year of construction: 1993, For sale is a Kaltenbach cold-cutting saw. Gearbox is free of play! Type: KKS 400 EC E Year of manufacture: 1993 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working range: 130 mm Working range for square material: 120 mm Working range for flat material: 305 x 20 mm Working range for round material: 130 mm Minimum working range: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions L x W x H: 1,080 x 900 x 1,760 mm Chedpfxe Ahzb Es Abaed Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.

Condition: ready for operation (used), Year of construction: 2000, Cold circular saw / MEP 350 Tiger -CE marking -Saw blade diameter 350mm -Saw speeds 15/30/45/90 rpm -Saw stroke approx. 100mm -Cutting capacity / 90 degrees - Round 115mm -Cutting capacity / 90 degrees - Square 95mm -Cutting capacity / 90 degrees - Flat 180x95mm Cjdpfx Abj Ahq Ncoaohd -Cutting capacity 45 degrees - Right/Left / Round 110mm / Square 95mm / Flat 125x95mm -Cutting capacity 60 degrees / Round 90mm / Square 80mm / Flat 90x95mm -Emergency stop -Coolant system -Single-sided roller conveyor Dimensions: L x W x H 0.8 x 0.7 x 1.8 meters / Weight 500kg Errors and omissions excepted

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: ST001, functionality: fully functional, power: 18.4 kW (25.02 HP), overall weight: 9,500 kg, saw band length: 11,760 mm, saw band width: 67 mm, No minimum price – guaranteed sale to the highest bidder! Chedpfxj Af Hd Ij Abaed TECHNICAL DETAILS Circular sawing capacity: 1,050 mm Saw band length: 11,760 mm Saw band width: 67 mm Saw band thickness: 1.6 mm Workpiece clamping: Hydraulic MACHINE DETAILS Control system: Conventional Power: 18.4 kW Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,450 x 2,000 mm Unladen weight: 9,500 kg Number of transport packages: 2 EQUIPMENT CE marking 6-meter roller conveyor

Condition: excellent (used), CNC Flexible FULL Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis Cedpfxszxc Ncs Abashd - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Year of construction: 2003, condition: good (used), functionality: fully functional, Selling GMM Eura bridge saw in good working condition. Mitre cuts. Table 35000x1850 lifts and rotate. Available in january 2027. Max blade D625. Flange 210mm. Max cut depth 200mm. Chodpfx Ae Ahq Udobaed Axis O sladge 3500 Axis X translation 3500 Axis Y up and down 320 Power 20kw

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, overall weight: 11,000 kg, Equipment: documentation/manual, saw blade guard, scorer, BIESSE Selco WNTR 600 with turning table . Made in 2003 • Max. blade projection: 132 mm • Cutting lengths: 4,500 mm • Main saw motor: 18 kW • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm • Saw carriage speed: up to 150 m/min (brushless drives) • Pusher speed: up to 90 m/min • Pusher grippers: independent pneumatic grippers Codpfx Abj Ahnc Teashd • Control system: OSI Plus numerical control • Machine layout: angular panel sizing possible by turning table, make it possible to cut two lines for automatic rip and cross-cutting . First time installed in 2004 and stil located on its original place , all machine function are 100% operative. Price 12 500 euro ex. VAT is included disassembling, packing and loading by crane. No VAT for sale outside Norway. Rekman Maskin&Service work with service of Biesse machine since 1986 here in Norway.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Bargain due to business closure Striebig Standard 3 TRK Cjdpfxo Ah D Hfo Abaehd

Condition: excellent (used), Year of construction: 2008, Title: MEP TIGER 352 SX evo Metal Cut-off Saw / Cold Cut Saw – Semi-automatic – Year of Manufacture 2008 Technical Data (Manufacturer's Specifications for the Model): * Manufacturer: MEP, Italy * Model: TIGER 352 SX evo * Year of Manufacture: 2008 * Saw Blade: HSS 350 × 32 × 2.5 mm * Motor Power: 1.8 / 2.6 kW * Connection: 400 V Three-Phase * Saw Blade Speeds: 15 / 30 / 45 / 90 rpm * Miter Range: -45° to +60° * Maximum Vise Opening: 190 mm * Cutting Range at 90°: Round material up to Ø 115 mm * Square Material at 90°: up to 95 × 95 mm * Rectangular Material at 90°: up to 180 × 95 mm * Machine Weight: approx. 425 kg * Dimensions: approx. 1,050 × 1,120 × 2,050 mm Equipment: * Semi-automatic sawing technology * Control panel with control unit Chedpe Ah Sh Nefx Abajd * Pneumatic workpiece clamping * Swiveling saw table for miter cuts * Coolant system * Robust machine base * Saw blade and other accessories shown in the pictures, available after inspection

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a scoring unit and veneer stop table. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick-cut veneer. Cutting length max. 4200mm. The saw unit and scoring unit are combined in a single unit, so that only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. The function of the scoring blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with a continuous finger stop, adjustable from approx. 2 - 50cm, with pneumatic clamping. Chsdpfx As Ahrgaobaed Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2kW. Carbide-tipped precision cutting blade, sharpened. Scoring blade with PKD (polycrystalline diamond) tips, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. Onboard tools. Saw blade and re-cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: ready for operation (used), functionality: fully functional, total height: 2,000 mm, total length: 2,800 mm, total width: 1,200 mm, overall weight: 1,500 kg, Heavy-duty automatic two-column band saw for metal. -BMSO 350 -Operation in automatic and semi-automatic modes -Cutting diameter: 350mm -Dimensions: 450x350 -Blade: 5000x34x1.1 -Documentation included -Two new cutting blades -Net price -+ 3 new blades included in the machine price (value approx. PLN 1000) -Delivery possible to any location in Poland -Further details in the attached photos and documentation -Affordable transport The machine is in very good technical condition and ready for operation. It can be viewed in Głosków, near Warsaw. Chjdpfj Ah Rx Dex Abaod

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Like-new, very well-maintained veneer saw with planing unit. Cjdpfx Ao Ahy H Hebashd Maximum cutting length: 3050 mm. Equipped with rear support and finger stop.

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm Chjdpfozv Uyuex Abaed motor 22 kW max. cutting height without pressure comb in fixed position: 130 mm max. cutting height without pressure comb with movable blade: 95 mm with pressure comb: 15 mm less cutting height still in good condition

Condition: good (used), Year of construction: 1998, functionality: fully functional, Important! The machine MUST be picked up during the first week of December (week 49). Free loading with a truck. Bandsaw automation system Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Cedpjz E Np Hefx Abashd Capacity for 9 bars, approximately 8 m in length. The bandsaw automation system is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min Machine dimensions (L x W x H): 320 x 260 x 220 cm Weight: approx. 2500 kg

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Chode Aduyhjpfx Abaod Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8384, total length: 144,400 mm, total width: 4,400 mm, total height: 4,000 mm, used Holtec miter saw, in operation until recently. Cjdpfezp Rn Uex Abashd

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Catalog number 7405 TECHNICAL DATA - max. cutting height 150mm - max. workpiece width 700mm - working width of the saw mandrel 530mm - max. saw blade diameter 450mm (installed 350mm) 350mm - arbor bore diameter 90mm from above: - pawls - 2 toothed draw shafts from below: - 2 smooth draw shafts - saw mandrel Ceds Agupfspfx Abaohd - smooth draw shaft - 4 feed speed settings - feed motor approx. 2kW - 30kW motor - machine dimensions L/W/H 2400x1700x1900mm - weight approx. 3000kg – Polish production – Used machine, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business relations with the manufacturer.

Condition: good (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 550 mm, overall weight: 500 kg, Pressta Eisele Profilma 501 Circular saw machine for aluminum and plastic profiles – ideal for series production with high volumes and precision requirements. Designed for 550 mm saw blades. The powerful 7.5 kW motor, in combination with the hydropneumatic saw feed (cutting from below), ensures fast and clean cuts. The cutting height is adjustable. Six pneumatic clamps (horizontal and vertical) with individually adjustable clamping pressure guarantee secure hold for delicate profiles. The stationary base frame (working height 980 mm), the manually opening protective cover, and the saw blade housing integrated under the table provide a high level of operational safety. Codpfx Aboz Hzagjaohd Minimum quantity lubrication system with a 1-liter lubricant tank including level control. Max. cutting range: – Profile height: up to 140 mm – Profile width: up to 270 mm – Round material: Ø 180 mm Technical data: – Weight: approx. 480 kg – Dimensions (W x D x H): approx. 170 x 148 x 155 (192) cm - Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Altendorf F 45 EcoDrive with CE configuration - Year of manufacture: 9/2016 - Electrically adjustable height and swivel function 0 – 46° for the main saw blade with automatic correction of the cutting height when the saw unit is swiveled. - 3-axis scoring unit for one-sided swiveling - LED lighting in the hazard area of the scoring unit Chsdpfs Ahgzxsx Abaed - 5.5 kW (7.5 hp) with VARIO - Double sliding table, table length 3,200 mm - On/off switch on the double sliding table - Table extension 840 mm - Angle/miter stop with DIGIT L, cutting lengths up to 3,200 mm - CNC parallel stop, cutting width 1,300 mm - Toolbox (minimum length of double sliding table: 3,000 mm) - Front support roller, width 300 mm - Operating manual, operating tools, charger with batteries Machine is in very good condition, cleaned, and inspected.

Condition: used, Technical specifications: Feed rollers on the table: 4 Pressure rollers: 6 Working width: 300 mm Working width of the roller: 300 mm Max. disc diameter: 350 mm Max. cutting height: 100 mm Anti-kickback devices: 2 rows Codps Ah Ey Ajfx Abashd Central lubrication for the track Feed speed adjustment: Smooth Main motor: 22 kW Guide rail: YES Overall dimensions: Length: 2700 mm Width: 1500 mm Height: 1700 mm

Condition: used, Year of construction: 2020, Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2020 Technical data - Circular saw unit, 0 - 46° swivel, maintenance-free, - Maximum cutting height 200mm, under-table dust extraction - Upper guard, cutting width 1000mm, hood for 90° cuts and hood for angled cuts, height-adjustable and can be swiveled away - Dust extraction connection 100mm - Circular saw table extension up to 1200mm behind the saw axis - Parallel fence with fine adjustment, fence ruler length 1200mm, can be swiveled Cjdj Ah E Rzepfx Abajhd - Crosscut fence 3200mm, swivels 90-45° - Kappa 550 control unit with programmable angle and height positioning, cutting height correction during swiveling - Machine stand Kappa 550, circular saw table 1180x610mm - Electrical system Kappa 550, 2x400V 50Hz CE, 10 kW S6 with star-delta starter - 3 speeds 3000/4000/5000 rpm. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Technical specifications: Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw blade arbor diameter: 30 mm Scoring saw diameter: 120 mm Scoring saw with separate motor Codpfe Ahyufsx Abajhd Manual saw blade height adjustment Tilting saw blade, adjustable from 0° to 45° Manual saw blade tilt angle adjustment Carriage lock Extension tables for angled cutting Dust extraction port diameter: 120 mm Electrically adjustable fence Safety switch Power supply: 400 V Motor power: 5 kW Overall dimensions: Length: 2900 mm Width: 3800 mm Height: 1450 mm

Condition: repair required (used), MZ Project LC 5000 – longitudinal cutting saw Csdpfxe Af Uu Re Abashd Cutting length: 2000 mm Machine intended for spare parts.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Cjdpfo Aggbxox Abashd Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.