Used Spindle Moulder With Sliding Table for sale (45,397)

Condition: used, functionality: unexamined, Fimal P350NX Sliding Table Panel Saw Ndsdpfew Tm Awox Affof

Condition: ready for operation (used), functionality: fully functional, 1 x CP Bourg BCMEx - CP Bourg BSR - CP BMEx - CP Bourg Squarefold - CP Bourg BSF 26 + Watkiss Spinemaster C.P. Bourg Inline Booklet Maker - BMEx for Nuvera Face trimming is included as standard with the BMEx. Saddle, corner, and top stitching are also supported. Operators can select top, edge corner, or saddle stitches (one, two, or four stitches) via a simple menu on the BMEx control panel; choose a top-stitch bypass while other finishing options remain available; make fine adjustments to stitch positions, fold positions, or trim distances in increments of 1/10 mm “on the fly” during operation. Up to 50 sheets (80 gsm) can be stapled. The BMEx can stack up to 50 booklets, depending on the number of sheets per booklet. The conveyor can be unloaded during operation. Ready for use this Friday – ideal for streamlined booklet production with Xerox, either inline or offline. E.g. for: • Xerox iGen family • Xerox Nuvera family Nodpfx Aewf Ryxjffodf • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Inspection welcome. Tested and fully functional – regularly serviced and very well maintained over the years. B2B sales only. Inspection welcome in northern Germany.

Year of construction: 2005, condition: ready for operation (used), Equipment: T 7300/2, T 7301 (precision adjustment for parallel stop), T 7302, T 7309/2, T 7330 (fixed scale), T 7337 (analog cross stop with seamless alignment), saw blade diameter: 250-500mm, speed: 2800/4000/5500/min, max. cutting height: 80mm, cutting width: 850mm, saw blade swivel range: 0-46°, sliding table length: 3000mm, connected load: 4kW, weight: 1.65t. An on-site inspection is possible. Ndsdpfx Afow S Txvefof

Condition: good (used), I sell the heavy duty fourside moulder SK MACHINERY 907S. Element max. 240x150mm ! 7 spindle configuration: Bottom 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Left 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Top 7,5kW (10HP) / 6000 rpm Top 12kW (15HP) / 6000 rpm Bottom 5,5kW (7,5HP) / 6000 rpm Total power 62KW / 102 A Total weight 5000kg. Element max. 240x150mm ! Moulding heads with spiral knives fi.140x260x40mm included in price. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Zone pneumatic pressure system for feeding wheels. Available immediately Ndedpepwdwbjfx Affsf Repair required: Bearings on one spindle which is already outside.

Condition: excellent (used), Panel saw SCM Si400e 9/24 Technical specifications: Carriage length: 3200 mm Electrically adjustable blade angle Electrically operated blade lifting Electric adjustment of right-side rip fence Cutting width right: 1270 mm Maximum cutting height: 130 mm Blade speed variable via belt Scoring unit speed: 6500 rpm Blade guard Emergency stop Main motor power: 5.5 kW Scoring unit motor power: 0.75 kW Ndedpfsw Rkz Sox Affof Overall dimensions: Height: 1400 mm Width: 4300 mm Length: 3550 mm

Condition: ready for operation (used), Saw blade tilting up to 45° Maximum saw blade diameter: 400 mm Sliding table 420 x 3200 mm, anodized Scoring unit Three cutting speeds: 3000 / 4000 / 5000 rpm Cross table 1420 x 650 mm with cross fence and 2 stops Manual adjustment of saw blade height and tilt Weight: 830 kg Year of manufacture: 2019 Nodpfxjw Rcmte Affjdf

Condition: as good as new (ex-display), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 288457-290911, Stroj je nov,nikada nije koristen Nedpfx Afjvp Smvjfedf

Condition: used, Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle Njdpfsd Ac Ipox Affjdf -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Ndsdpfx Afsurwy Njfjf

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Nsdpfett Nq Dox Affodf Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.

Condition: new, Holzkraft minimax t 45c table router (5502044) Low-priced, with rigid milling spindle and cast iron work table. - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3500 to 10000 min¯¹ Ndjdpfxokyt Ule Affef - Milling spindle with right-left rotation - Large dimensioned milling unit made of grey cast iron, directly fixed to the table - With suction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5,0 kW - Standard arc milling protection hood - Quality Made in Italy Equipment details Cast iron milling unit - Directly mounted on the milling table - Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life - 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors - Equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence - Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. - The integrated suction connection ensures a clear view Milling table opening - A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - versatile integratable stop for bridging the tool gap - enables safe working even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimum protection on every router table, individually adjustable to the task at hand - Universal basic elements for mounting AIGNER safety and working devices - Quickly adjustable due to simultaneous clamping of all individually adjustable rods - Made of high quality aluminum - Can be used universally on all HOLZKRAFT table routers - 500 mm: Item no.: 5851000 - 650 mm: Item no.: 5851650 TECHNICAL DATA Dimensions and weights Weight (net) approx.: 240kg Suction connection Suction port diameter: 2 x 120mm Work table Working table length:1000mm working table width: 575mm table height: 900mm Set up information Required space length: 1945mm Required space width/depth: 920mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Working area width/depth: 1600mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage: 400V Mains frequency: 50Hz Power drive motor: 5,0kW Milling spindle useful length of the spindle: 100mm spindle protrusion max. over table: 130mm Spindeldrehzahl(en): 3500/7000/10000min¯¹ spindle arbor diameter: 30mm Milling tool diameter max. Tool diameter max. lowerable: 180mm Tool diameter max. profile milling: 210mm SCOPE OF DELIVERY - arch milling protection cover - aluminum stop jaws Holzkraft dealer - accessories available on request!

Condition: excellent (used), Year of construction: 1990, Spindle moulder TS110 Year of manufacture 1990 380 Volts, 7.5 HP Fence with fine adjustment 4 speeds: 3,000, 4,500, 8,000 and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 speeds, Power feed rollers new Nsdpfxjv Im Swo Affsdf

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Nodpfx Asipv Rloffedf Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg technical specification under subject

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Nsdpfx Aewmw Nveffodf Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield. Ndedpfjdnxydex Affsf

Condition: new, Year of construction: 2024, I sell the new fourside moulder LEADERMAC COMPACT 430, New machine year 2024. Showroom machine ! Configuration 4 spindles: Bottom 7,5 kW / 10,0 HP Right 7,5 kW / 10,0 HP Left 7,5 kW / 10,0 HP Top 7,5 kW / 10,0 HP Feeding speed adjustable 6-24 m/min. Feeding motor 7,5 kW / 10,0 HP + inverter Element width max. 15-300mm Element height max. 10-200mm Alle 4 Spindels 6000 rpm. Schneider Touch-Screen EASYSET Electronic programmer for setting the working width, top spinde, aka working height, and height of the pressure zone. Material pressures for short elements. 3-zone pneumatic pressure system for feeding wheels. Nodsrfud Iepfx Affjdf Total weight 4000kg. Total power 39 kW / 52 HP Fully working. Available immediately Showroom machine, fully NEW ! Incl. CE and complete Documentation !

Condition: ready for operation (used), Brand: Rüco Tech info: Max distance between blades: 1830 mm Stroke length: 1600 mm Max saw height: 70 mm Blade diameter: 350 mm Njdpfom Sghxox Affsdf With pneumatic material pressure unit Engine power of each engine: 2.2 kW Power: 50 Hz, 380V, 3-phase Stock no: 2001575BXA

Condition: excellent (used), Table milling machine Oltrogge Ndodpfx Asuhn Tdeffof Table 1000 x 1000 mm casting machine, 2 speeds (3000/6000) flat belt drive

Condition: new, Year of construction: 2025, The PS315-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. Nsdpsvuf Rfjfx Affsdf Main features of the PS315-2000 panel saw Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Adjustable blade height: Cormak's format saw with undercutter offers infinitely variable adjustment of the height of the cutting blade which allows it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45°, providing the ability to make bevels and cuts at different angles. Solid slides: The machine has solid slides with scales, both longitudinal (steel) and angular, which allows precise angle setting. Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system to help keep the work area clean. Easy blade change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with scale: The wood format saw with undercutter is equipped with a side guide with accurate graduation, which makes it easier to make serial cuts of the same length. Saw blade guard: the saw is fitted with a saw blade guard, which can also be connected to the extraction system to guarantee safety and cleanliness in the work area. Ground cast iron worktop: The ground cast iron worktop and additional extending tops enable long workpieces to be processed quickly and conveniently. Additional measuring instruments: All slides have length and cutting angle scales, making it easy to set the required cutting angle and length without the need for additional measurements. Extraction connection: The saw is compatible with a sawdust and chip extraction system to help keep the work area clean. Technical data: Length of format table [mm] 2000 Cutting width [mm] 1220 Angled saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height at 90° [mm] 100 Maximum saw blade dimension [mm] 315 Maximum dimension of undercutting [mm] 90 Main saw unit speed [U/min] 5800 Circular saw rotation [U/min] 4000 Motor power [kW] 3.8 Power supply 3 phase, 400V Weight [kg] 350 Warranty [months] 12

Year of construction: 1989, condition: like new (used), Spindle diameter 30 mm 5.5 kW engine power Nodpfx Afshi Tv Hofedf 5 speeds 3000/4500/6000/8000/10000 U / T 1989 Can be purchased without advance

Condition: new, Dimension of sliding table- 3200x375mm Ndjdpfxodd Dzdj Affef Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2024, I sell the new fourside moulder LEADERMAC COMPACT 623C (2M), New machine year 2024. Showroom machine ! Configuration 6 spindles: Bottom 5,5 kW / 7,5 HP Nsderfuc Rspfx Affedf Right 5,5 kW / 7,5 HP Left 5,5 kW / 7,5 HP Top 7,5 kW / 10,0 HP Right moulding head 11 kW / 15,0 HP / adjustable speed Left moulding head 11 kW / 15,0 HP / adjustable speed Feeding speed adjustable 6-36 m/min. Feeding motor 3,0 kW / 5,5 HP + inverter Element width max. 15-230mm Element height max. 10-150mm Alle 6 Spindels 6000 rpm. / the left and right squaring moulder with adjustable speed Electronic programmer for setting the top spinde, aka working height. Material pressures for short elements. 3-zone pneumatic pressure system for feeding wheels. Total weight 4500kg. Total power 51,18 kW / 68,25 HP Fully working. Available immediately Showroom machine, fully NEW ! Tools, Moulding heads, squaring heads, and all accessories included.

Condition: new, Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Nodpsdd Dzuofx Affodf Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg (EXW Jonava, Lithuania)

Condition: used, Type SI 15 WF Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Ndjdpfx Asitvd Isffof Price 1200 Eur (EXW Jonava, Lithuania)

Condition: new, Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Njdpfofd Raaex Affjdf Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm