Used Spindle Moulder Feed for sale (19,738)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Iodpfx Ahsytf Ekjveap Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Iodpfoyuxq Aex Ahvjap Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Isdpfeyqx T Aex Ahveap Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Ijdeyvhcfspfx Ahveap Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication Iaedjw Rdthepfx Ahvjp - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: used, Year of construction: 2011, turning diameter: 170 mm, spindle bore: 42 mm, CNC Lathe with 2nd Spindle, 2 turrets and Y-axis (7-axis) Control: Fanuc 31i-A Turning diameter: 170 mm Turning length: 503 mm Spindlebore diameter: 42 mm Spindle Nose: A2-5 Spindle nose sub-spindle: A2-5 Spindle (left) speed 6.000 1/min Spindle (right) speed 6.000 1/min Movement X-axis: X1: 135 / X2: 135 mm Movement Y-axis: +/- 31 mm Movement Z-axis: Z1: 503 / Z2: 503 mm Min indexing C-axis right spindle 0,001 ° Min indexing C-axis left spindle 0,001 ° Number of tools on turret 2x12 Tool Type: BMT 44 Iedpfx Ajyu Tpmohvjap Bar Feeder: Iemca Boss 525E (Year 2011) Machine weight: 5,650 kg. If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm Iasdevi I Nmopfx Ahvjp tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm Ijdpfeyu R Nksx Ahvjap 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm Iasdpoyu R H Njfx Ahvsp 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 226-60368, total width: 2,200 mm, total height: 2,000 mm, total length: 4,500 mm, overall weight: 4,000 kg, WEINIG PROFIMAT 23 Four-Side Planer - Operating voltage: 380 V - Frequency: 50 Hz Iasdpjyu Iwlefx Ahvsp - Spindle length – working spindle: 247 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length – surfacing spindle: 240 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointer, left, and top spindles: 40 mm each - Adjustment travel (axial): 5 mm, radial: 15 mm; jointer spindle: 40 mm axial, 50 mm radial; left spindle: 40 mm axial, 200 mm radial; top spindle: 40 mm axial, 120 mm radial - Max. cutting circle behind fence: 200 mm - Max. cutting circle – working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm - Distance below table, working spindle: 20 mm, jointer spindle: 15 mm, left spindle: 15 mm - Minimum cutting circle diameter, working spindle: 125 mm, jointer spindle: 100 mm, left and top spindle: 100 mm - Maximum cutting circle diameter, working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Adjustment travel: 35 mm axial, 68 mm radial - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - RPM: 6,000 - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm - Surfacing table adjustment range, up/down: 10 mm - Jointers fence adjustment range: 10 mm Attention: The item must be collected bindingly between 01. and 10.06.2016, on a date to be arranged. FCA D-75433 Maulbronn – loaded onto truck

Condition: used, Year of construction: 2001, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed speed 5-24 m/min. Weinig Profimat 26 S Four-Sided Planer ..... Summary: - 5 spindles (bottom, right, left, top, bottom) - Common control of the right spindle (axial), top spindle (axial), and glass bead discharge. - Working width (with a 125 mm tool circle) 20 - 230 mm - Working height (with a 125 mm tool circle) 8 - 120 mm Detailed description: 1. SPINDLE ..... - First lower horizontal spindle - Motor with brake 5.5 kW - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 125 - 145 mm - Axial travel 5 mm - Rebating device - Hardened table insert in front of the 1st lower spindle 2. SPINDLE ..... - First right vertical spindle - Motor with brake 7.5 kW Shared motor with left vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 15 mm below table level 100 - 200 mm - Tool circle 40 mm below table level 100 - 180 mm - Max. tool diameter behind stop level 180 mm - Max. groove depth 35 mm - Axial travel 40 mm - Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment 125 mm 3. SPINDLE ..... - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool swing circle 15 mm below table level 100 - 200 mm - Tool swing circle 40 mm below table level 100 - 180 mm - Max. Tool diameter behind stop plane 180 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Insert segment 125 mm 4. SPINDLE ..... -First upper horizontal spindle -Motor with brake 7.5 kW -Diameter 40 mm -Speed ??6,000 rpm -Tool swing circle 112 - 200 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Upper horizontal spindle pneumatically controlled axially (40 mm) via selector switch, Max. saw diameter 200 mm -Split pressure shoe in front of upper spindle, adjustable to the tool swing circle and pivoting away from the tool, spring-loaded. - Pneumatically adjustable up/down glazing bead discharge to the upper spindle 5. SPINDLE ..... - Second lower horizontal spindle - Motor with brake 4.0 kW - Diameter 40 mm - Speed ??6,000 rpm Iodpfoyuzczox Ahvjap - Tooling circle 112 - 200 mm - Maximum groove depth 15 mm All groove spindles dynamically balanced for high concentricity Common control of the right spindle (axial), upper spindle (axial) and glazing bead discharge FEED SYSTEM ..... - Mechanical feed, infinitely variable 5 - 24 m/min. With brake – 2.2 kW -Feed roller in front of the first lower tool, pneumatically controlled "up-down" -Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning -Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm MACHINE ELECTRICAL TECHNOLOGY ..... -Operating voltage 400 volts (voltage range 380–420 volts), 50 Hz -Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1 Other electrical regulations are not c...

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Isdpjyi A Tdefx Ahvjap Storage location: Nattheim

Condition: excellent (used), Year of construction: 1998, TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 130 mm - 5 spindles: 1) Lower horizontal spindle, 230 mm, 4 kW 2) Right vertical spindle, 130 mm 3) Left vertical spindle, 130 mm (2nd and 3rd spindle), 7.5 kW 4) Upper horizontal spindle, 230 mm, pneumatically adjustable front/rear 5) Lower horizontal spindle, 230 mm, 4 kW - All spindles adjustable (up/down, right/left) Iaodpjyutyfsfx Ahvep - All spindles with electric brake - 4 upper feed rollers, toothed, 2 of which are double - 2 upper outfeed rollers, rubber-coated and smooth - Feed via cardan shaft - Feed motor: 2.2 kW - Operating pressure: 6-10 bar - Planing thickness adjustment - Table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5x140 mm - Dimensions (L/W/H): 4000 x 1800 x 1700 mm - Weight approx. 3,300 kg Ex works - Available at short notice -

Condition: used, Veneer press continuous press gluing press plate press Bürkle HSO 240/D 340/140 Press dimensions: 3400x1400mm Max discharge pressure 240T Max pressing pressure 6 kg/cm² Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Exclusive glue roller Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Documentation still available, first owner! Sold as one unit including conveyor belts Iajdpfx Ahswng Tyjvep - Details: - └ Description: The Omma glue roller is not available - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 3400 - Max. workpiece width [mm]: 1400 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Total working pressure [ton]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water heated - Max. working temperature [°C]: 150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Veneer press Feed-through press HOT Colombo Iaodpfx Ajwnhvvehvep Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 8 - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Iaedownhabspfx Ahvep Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, gebraucht Iedpfx Aheyui Urjvoap 070165C prompt, Zwischenverkauf v Deutschland 480 € 1 1.5 mm 100 mm 200 mm 3 - 6 bar 560 mm 200 mm 200 mm 11 kg

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Iajdpfoyudg Asx Ahvsp

Condition: used, Year of construction: 2003, Overview This rotary PET blow moulding machine was manufactured in 2003 by the German company Krones. The S8 model is designed for the production of high-quality PET bottles and adjusted for 1.5 L bottles and neck PCO1881. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Air conveying system is available. Technical data  Application: PET bottle production Capacity: 14,000 bph year of manufacture: 2003 Bottle Formats: 1.5 L  Neck Finish: PCO1881 center-cooling air conveying system available scope of supply: blow moulder Krones Contiform S8 (2003) cooling unit preform feeding preform container preform tilting device air conveying system available Iajdpfx Aoyucaushvop

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder Iodpfxjyucd Tj Ahvsap – 8x machine feet – Original tool set

Condition: used, For sale: Vaccari Press 330T. The machine is currently not in operation. Ideal for refurbishment or spare parts. For more information or if interested, feel free to send a message. Iasdpoyvia Sjfx Ahvjp

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 11kW Left 11kW Ijdpexcft Sjfx Ahvjap Top 11kW outboard bearing Right 11kW Left 11kW Top 11kW outboard bearing Bottom 11 kW outboard bearing Bottom 22 kW outboard bearing Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. Large quantity of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Ijdpfx Aexqh E Hjhvjap Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: ready for operation (used), total height: 2,855 mm, total length: 6,202 mm, total width: 3,445 mm, empty load weight: 11,800 kg, Movement of table: 1610 mm (manual) / 1420 mm (hydraulic) Vertical movement: 850 mm Transverse movement: 750 mm Max distance between table and grinding wheel: 750 mm Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountedvertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius. Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 1400 and up to 3000 rpm Motorpower: 22 kW Iajdpfxeytyq Ij Ahvjp

Condition: ready for operation (used), Alpa RTL 1000 Worklength with magnetic table: 1000 mm Grindingwidth: 635 mm Longitudinal travel X-axis (autom.): 1150 mm Cross-travel Y-axis (autom.): 560 mm Travel Z-axis (autom.): 620 mm Dimensions magnetic table: 1000 x 500 mm Max dia grindingstone: Ø 400 × 127 × 75 mm Iajdpfx Aeytyq Uohvep