Used Spindle Carver for sale (12,421)

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Dcjdpstr Ud Sofx Ac Njc Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Dcjdpfxstzxh Tj Ac Nec Weight approx. 950 kg

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 145 mm Dsdoh Dzxzepfx Ac Nocc Max tool size: 220 mm Revolutions: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Working table dimensions: 300x1100 mm Adjustable culagi arms Engine power: 5.5 kW Power supply: 380 V Producer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Height: 1230 mm

Condition: new, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm Revolutions: 1300/2500/3500/5000/6000/8500 rpm electric spindle height adjustment Spindle lock Working table dimensions: 700x1200 mm Adjustable culagi arms Engine power: 4 kW Dcsdpfx Acjhp N Nbs Njc Power supply: 380 V Producer: Paoloni Overall dimensions: Length: 1,200 mm Width: 850 mm Height: 1340 mm

Condition: used, Technical data: Dedep T Un Sopfx Ac Nscc Spindle diameter: 35 mm Spindle height: 140 mm RPM: 3000/4500/6000/8000/10000 obr./min Manual spindle height adjustment Spindle lock Work table dimensions: 350x1190 mm Culagi arms adjustable Extraction spigot diameter: 115 mm Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1190 mm Width: 860 mm Height: 1600 mm

Condition: new, MAIN FEATURES OF THE MACHINE: -Single-head drilling machine for drilling in the range of 0 - 90 ° -The inclination angle of the head is pneumatically adjustable -Possibility to set the side stops with an accuracy of 0.1 mm -Security handles allow the panels to be quickly positioned without adjustment -Patented pneumatic material clamps -A cast iron head that guarantees damping of all vibrations - MDF work table -Quick and accurate adjustment -Precise drilling -Quick change of drills with quick couplers -Spiral System- a device for quick adjustment of the drilling depth Technical data: Number of spindles: 29 Dcsdpfx Aoh Dzr Aec Nec Distance between first and last drill bit: 896 mm Distance between centers of individual spindles: 32 mm Number of pneumatic clamps: 2 Max workpiece size: 1142 x 3000 mm Max element thickness: 70 mm Working pressure: 6 - 7 bar Noise level: 76.1 dB Air consumption: 10 l / cycle Engine power: 1.5 kW Revolutions: 2800 rpm. Overall dimensions: Length: 1507 mm Width: 960 mm Height: 1265 mm

Condition: used, 2-spindle vertical drilling machine Dcodoyg Ix Tepfx Ac Noc

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: Dcsdpfx Aoyfhppoc Njc - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning Dcodpfx Acox Ifbve Nsc - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2015, WEINIG POWERMAT 1200 (6 SPINDLE) YEAR 2015 WIDTH 230MM HEIGHT 160MM ALL SPINDLES 8000 RPM ALL SPINDLES 50MM SHORT INFEED TABLE 1: BOTTOM 11 KW 2: RIGHT 11 KW 3: LEFT 11 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW CNC AXIAL CONTROL ON SPINDLES 3, 4 AND 5 Djdpfx Aceyg Eblo Njcc 40 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS ANTI-KICKBACK DEVICE AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS DIMENSION: APPR 3000 X 2000 X 1800 MM WEIGHT: APPR. 4500 KGS DUSTHOODS: 6 x 140 MM DIAMETER DUST MANIFOLD INCLUDED POSSIBLE TO SUPPLY WITH MOULDER INFEED AND DROP LEAF OUTFEED POSSIBLE TO SUPPLY TOOLING IF NEEDED

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Djdpfx Acswp Ri Us Necc Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: used, Make: PRÄWEMA, Model: 205HS2-2 / Synchrofine, Year of manufacture: 2008, Machine no.: 077238, Control unit, Manufacturer: Rexroth Indramat, Type: System 200 BTV20, including handheld operation terminal, Workpiece diameter: Ø 95mm, Maximum workpiece length: 59mm, Maximum spindle speed C-axis (workpiece spindle): 6,000 rpm / 7,000 rpm, B-axis (tool spindle): 2,000 rpm, Maximum feed rates Z/X: 60 m/min, Honing head ZNG-No.: 416101804-8, Year: 2008, Serial no.: 221, Machine bed granite, Manufacturer: Eckbert Reitz, Type: HFSL204HS2, Year: 2008, Workpiece automation, Surface finish inspection unit, Oil drip tray, Pump, Manufacturer: Brinkmann, Type: TH160/350-001, Operating hours as of 18.11.25: 69,518 +++ Attention: This item is part of an online clearance sale! +++ Dsdox Ahc Nepfx Ac Njcc

Condition: used, Year of construction: 2001, spindle tilting: Ja -25 bis +45° height adjustment: elektrisch tilting adjustment: elektrisch read out tilting: digital read out spindle height: digital read out fence: Siko Zähler spindle diameter: 30 mm speeds: 1.500/3.000/4.000/4.500/5.000/6.000/8.000/9.000/10.000 U / min motor power: 7,5 kW motor brake: Ja, automatisch feeder: Wegoma 4 Rollen suction connection: 2 x 120mm machine length: 1900mm Dcedpfxswx Nnbe Ac Noc machine depth: 1400mm weight: 1000 kg

Year of construction: 2010, condition: new, 1. BAZ HUeLLER HILLE nb-h260/nb-h290 My.ca.2010 Dodpfx Ascrk Ivec Necc As good as new in original condition. 1.ball screw Y-axis new. desweiten other parts On request.

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Dcsdjwah Rqepfx Ac Nec Chuck 130 mm In good condition. See data sheets for details.

Condition: good (used), Year of construction: 1974, LZ-Lathe Fabr.Boley Type: 6 LZ Year 1974 Center height : 140 mm center distance : 500 mm Dcjdoqw U Uwjpfx Ac Njc spindle speed : 28-3550 rpm spindle bore : 32 mm collet chuck device, 3-jaw chuck, quick-change tool holder Parat. Machine documentation available, machine can be demonstrated under power.

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Center height : 250 mm Center width : 1500 mm Dcodju Rd H Iopfx Ac Nec spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Dcodpfeqwgzqox Ac Nec Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: repair required (used), Year of construction: 1991, LZ-Lathe Fabr.KERN Type :DS 22 A Year of construction: 1991 with 3-axis digital readout Heidenhain . Steady rest, tool holder Multifix B, rear panel, machine documentation available. Machine is defective ( clutch ) Center height : 275 mm Turning diameter over face support : 300 mm Djdpfx Acjq Hd I To Nocc Center distance : 1000 mm Spindle bore : 52 mm Spindle speeds : 18 - 1800 rpm . Machine is sold at a fixed price .

Condition: repair required (used), Year of construction: 1990, LZ-Lathe Fabr.WEILER Type : COMMODOR Year 1990 with 3 axes digital readout Heidenhain, Multifix holder B, steady rest, machine documentation Machine is defective ( clutch ) Dcodpsq Hd Ipefx Ac Nsc Center height: 214 mm turning diameter over face support : 200 mm Center distance : 1000 mm spindle bore : 60 mm Spindle speeds : 45 - 2000 rpm Machine is sold at a fixed price.

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Dcedpfoxziuwsx Ac Nec Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Centre height: 240 mm Centre distance: 1250 mm Spindle bore: 55 mm Spindle speeds: 19–2000 rpm, motor output 5.5 kW Dodpfx Aew S Itujc Necc Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition.

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Dcjdpfxst Ipi Ie Ac Njc Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. Dcsdpfx Acovkuaus Nec For further information see data sheets.

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Dodpfx Aox Hr Dusc Njcc Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Tool holder: Multifix C Chip protection cover For further details, see technical data sheet. Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg.