Used Sort Band for sale (4,661)

Condition: used, Year of construction: 2004, High-capacity band saw with roller feed MG model BMSO 320L Used semi-automatic band saw - High-capacity band saw with roller feed - Progressive hydraulic feed - Chip cleaning brush - Saw speed adjustable via electronic frequency inverter from 20 to 100 m/min Nsdpfx Ahex Ng Sxjvskw - Front millimeter stop of 500mm with electric limit switch Serial number: 41021 - Blade dimensions: 4160x27x0.9mm - Motor: 1.5kW - Round cutting capacity at 90°: 320mm - Rectangular cutting capacity at 90°: 500x320mm - Square cutting capacity at 90°: 320mm

Condition: excellent (used), functionality: fully functional, Vertical Bandsaw JAROMA Type DKRB 160 The machine is fully operational and in working condition. Includes feeders, conveyors, and control cabin – all as shown in the photos. Max. cutting height: 1200 mm Max. processed log thickness: 1400 mm Max. cutting length: 5500 mm Njdpfx Asyivqpshvskw Main motor power: 75 kW

Condition: excellent (used), functionality: fully functional, cutting height (max.): 1,250 mm, Vertical bandsaw SCHULTE Type VB12 The machine is fully operational and functional – with new electrical installation and control system. The set includes feeders, conveyors, and operator cabin – all visible in the photos. Max. cutting height: 1250 mm Max. diameter of processed log: 1450 mm Length of hydraulic carriage: 5700 mm Main motor power: 55 kW Nedjyivhnopfx Ahvokw Exact dimensions are shown in the drawing attached in the photos.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 2,500 h, The sawmill is in very good technical condition and has 2,500 operating hours. - maximum cutting width: 1200 mm Nsdpfx Ahjxy Skfjvjkw - maximum cutting length: 11,500 mm - main motor: 45 kW - side feeder: 5,500 mm - outfeed table: 5,500 mm

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Nsdjw E Ei Uepfx Ahvskw Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, Equipment: CE marking, – DTR technical documentation in Polish TECHNICAL PARAMETERS: – flywheel diameter: 815 mm – max. cutting height: 500 mm – max. cutting width: 800 mm – table dimensions: 1030 x 600 mm – table tilt: 0° – 20° – blade dimensions: 5643 x 38 x 0.65 mm – blade speed: 20 m/s – motor power S1: 4.5 kW Nkjdsyuf Tqspfx Ahvjw – large tilting cast iron table – high-quality steel construction – precise bandsaw guidance system above and below the table – rubber-coated wheels for extended bandsaw blade life – overall dimensions (L/W/H): 122 / 77 / 254 cm – weight (net/gross): 680 / 770 kg

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, height adjustment type: mechanical, overall weight: 450 kg, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm Nedpfxowb Ha Ts Ahvokw – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: used, mileage: 160,230 km, power: 294 kW (399.73 HP), first registration: 07/2016, tire size: 13R22.5, axle configuration: 8x4, wheelbase: 1,800 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2016, Equipment: electric window regulation, Applicable material: Concrete Suspension: leaf suspension Axle 1: Tyre size: 13R22.5 Axle 2: Tyre size: 13R22; Steering Axle 3: Tyre size: 13R22; Double wheels Axle 4: Tyre size: 13R22; Double wheels Nodpfxjuczf Aj Ahvjkw Drive: Wheel GVW: 32.000 kg Make of engine: MAN = Additional options and accessories = - PTO

Condition: used, mileage: 142,843 km, power: 294 kW (399.73 HP), first registration: 10/2017, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 1,880 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, electric window regulation, General information Applicable material: Concrete Drivetrain Drive: Wheel Nsdpfxoucz Hto Ahvskw Make of engine: Iveco Axle configuration Tyre size: 315/80R22,5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Weights Empty weight: 15.628 kg Carrying capacity: 16.372 kg GVW: 32.000 kg = Additional options and accessories = - PTO

Condition: used, mileage: 174,657 km, power: 316 kW (429.64 HP), first registration: 06/2017, tire size: 13R22,5, axle configuration: 8x4, wheelbase: 2,000 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, electric window regulation, General information Nkedpfsuc Eftjx Ahvew Applicable material: Concrete Drivetrain Drive: Wheel Make of engine: Renault Axle configuration Tyre size: 13R22,5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Weights Empty weight: 16.167 kg Carrying capacity: 15.833 kg GVW: 32.000 kg = Additional options and accessories = - PTO

Condition: used, mileage: 131,909 km, power: 294 kW (399.73 HP), first registration: 10/2017, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 1,880 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Applicable material: Concrete Tyre size: 315/80R22,5 Suspension: leaf suspension Nksdpfx Aouc D Exehvsw Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Drive: Wheel GVW: 32.000 kg = Additional options and accessories = - PTO

Year of construction: 2004, condition: good (used), LBL Brenta Spaner CT 700 Max. cutting depth = 150 mm Max. cutting height = 650 mm Free central blade, overheating protection Clearance = 800 mm Fast, precise positioning via servomotor with electrical system. Nkedjyuc Niepfx Ahvsw

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, control type: manual, degree of automation: manual, actuation type: manual, coil inner diameter: 370 mm, coil outer diameter: 430 mm, coil weight: 2,000 kg, coil width: 3,000 mm, -Double band decoiler with a disk; -3000 mm max coil width (when using 1 coil); -Loading up to 2000 kg max coil; -Dimensions shown in picture; -Barely used (did not fit our use case); Njdex Nf R Hepfx Ahvekw -We can arrange transportation to any European Union country at buyers costs;

Condition: used, Year of construction: 1995, machine/vehicle number: 795101, Offer 26032 Hydraulic Twin-Column Guided Mitre Band Saw Automatic Machine Technical Data: Nkedpfx Aeyv D Idohvjw - Cutting capacity at 90° – round: 310 mm - flat: 520 x 310 mm - Mitre adjustment to the left up to 30° - Cutting capacity up to 45° – round: 340 mm - flat: 350 x 310 mm - Cutting capacity up to 30° – flat: 230 x 310 mm - Saw blade dimensions approx. 5000 x 41 x 1.3 mm - Cutting speed: 17 – 120 m/min - Infinitely variable cutting pressure: 0 – 10 m/min - Automatic material feed - Total drive power approx. 400 V / 6.0 kW - Micro-spray coolant system - 2 x roller conveyors, each 2000 mm - Space requirement approx. W 3500 x H 1800 x D 1600 mm - Weight approx. 2000 kg

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom Nedpfxoyv Da He Ahvokw ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, Year of construction: 2001, Sabi PSR 360/600 bandsaw, semi-automatic Sabi bandsaw, all carbide (WIDIA) blade guides and seals and scrapers of the saw's lift/lower cylinder have been replaced. Cutting capacities: max diameter 320mm, rectangle 600 x 300mm, at 45º: 375 x 300mm. Cutting speed 15 to 105 m/min, main motor 2.2kW, total power 2.5kW, estimated weight 1900kg. Machine with rotation function, in very good condition. Nsdpfx Asxf Tvmehvskw

Condition: used, Technical data: Max cutting height: 300 mm Nsdpfjyv At Esx Ahvjkw Max cutting width: 675 mm Wheel diameter: 700 mm Blade adjustment range: 5140–5010 mm Max blade width: 40 mm Min blade width: 5 mm Worktable dimensions: 850x1100 mm Extraction port diameter: 110 mm Emergency stop switch Motor power: 3 kW Voltage: 400 V Overall dimensions: Length: 850 mm Width: 1280 mm Height: 2300 mm

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,000 kg, Equipment: CE marking, Behringer HBP 263 A – Heavy-Duty Automatic Band Saw (Year 2007) For sale: A high-quality, German-engineered Behringer automatic band saw in excellent condition. This machine is well-known for its precision and durability, and this particular unit has been meticulously maintained. Nkodpfxoyv Arne Ahvow The saw is in premium condition and is equipped with top-tier features. Inspection is welcome! Key Features & Options: • Automatic Start with Laser: Significantly reduces setup time (see video at 0:55). • Variable Frequency Drive (VFD): Infinitely adjustable blade speed control (no maintenance-prone variator belts). • Misting/Coolant System: Essential for tube cutting – keeps the environment clean and prolongs blade life. • Automatic Pressure Regulation: Automatically reduces feed pressure for optimal cutting performance. • Chip Conveyor: Automatically keeps the workspace clean. • Blade Cleaning Brush: Extends blade life and enhances cut quality. • Safety Features: Full protection against blade jamming, breakage, etc. Maintenance History: The saw has undergone a comprehensive overhaul, including thorough testing and calibration. Recent service includes: • Control panel and electrical system checks. • Blade guides serviced. • Complete oil change (Gearbox filled with Shell fully synthetic oil = extended service intervals). • All filters replaced. Technical Specifications: • Cutting Capacity at 90° (Round / Square): 260 mm / 260 x 260 mm • Cutting Capacity at 90° (Flat): 300 x 260 mm • Stepless Cutting Speed: 20 – 120 m/min • Saw Band Dimensions: 4,640 x 34 x 1.10 mm • Saw Motor Power: 3.00 kW • Total Power Requirement: 8.00 kW • Min. Cutting Length / Diameter: 10 mm / 15 mm • Machine Weight: approx. 2,000 kg • Dimensions (L x W x H): approx. 2.60 x 1.60 x 1.90 m

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Nkjdpfjyv Ai Hsx Ahvew Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Year of construction: 2025, condition: new, 1) Climbing conveyor belt: - Long 12000mm, working width 900mm - Hopper length 3000mm width 2000mm, height 1500mm from the ground, - Climbing angle approx. 16 * - EP 400/3 rubber band with 32mm sleepers - Inverter controlled transmission speed up to 0.3 m / s - Conveyors with safety stop 2. Sorting table: - conveyor belt length 15000mm, working width 950mm, - height 1300 mm to the upper part of the belt, - height 1400 mm to the upper part of the sides (10 cm hoh walls), - the conveyor sides are made of galvanized steel, - the rubber band EP 400/3 smooth - the sides of the conveyor 100mm, - the height of the funnel 600mm, width 1000mm - the speed of the conveyor is set by the inverter to 0.4 m / s regular - Safety stop switch 3. Steel grandstand with WEMA grids: - Stand length 15,000 mm - Width of the grandstand is 3200mm - Stand height 2500 mm from the floor, - with grating stairs on both sides of the conveyor made of WEMA grating, - on steel legs number of 12 pcs, - Number of boxes 5 pcs, - Number of slides 10 pcs, - Slide dimensions: 400 mm x 1000 mm, - Under the slide, attachments for big bag - on a winch. Njdpfx Aod N Hiiehvskw 4. The line is painted with two layers of paint. 5. RAL orange color 2011 6. Sorting line connected with a switch box, wire-shaped stop switches and a 32A / 5 and 15m long plug of a power cable with rubber insulation is equipped 7. The sorting line has a 24-month warranty 8.

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Nodpfxeul Svlj Ahvskw Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pacific P V 12 - F, year 1999 Power: 12.5 kW Edge thickness: 0.2–12 mm Feed: 12 m/min Glue application roller, synchronous and counter-rotating Automatic infeed fence Jointing/edge trimming End trimming up to 3 mm Flush milling at 15°, 30°, 45° Radius milling R 2 – R 5 Flush sawing Corner rounding Radius scraper blade Schwabbl cleaning unit Extendable roller support Nkodpfxew Ni Nrj Ahvsw Compressed air: 6 bar Dimensions: 5400 x 1000 x 1400 mm Weight: 2300 kg

Condition: used, Year of construction: 1994, operating hours: 10,200 h, functionality: fully functional, arm reach: 14,500 mm, track width: 3,000 mm, Equipment: cabin, crane, For sale is a used Wolf Sorting Train RSZ 3.00-14.5/25 with the following features: Year of manufacture: 1994 Operating hours: 10,200 Rail length: 65 m Track gauge: 3.0 m 4-wheel drive Location: 48727 Billerbeck Crane type: EPSILON E.28.147 S Herkules Reach: 14.5 m Lifting capacity without grab: 1,950 kg at 14.0 m Grab: included Crane position: behind the cabin Cabin side: right Nkodpfx Aeyvuz Uehvsw Cross-cut saw: right Multitronic, cross-cut optimization The machine is fully operational and can be inspected by appointment. Sale due to cessation of business operations. We look forward to your inquiry and are available at any time for further information.

Condition: excellent (used), Year of construction: 1999, Cutting diameter round: 200 mm Nksdsyvtcwspfx Ahvow Saw band length: 2,830 mm Cutting angle adjustment: 45° right/left

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, Sharpening machine for band saws with blade widths up to 360 mm. Feed from the left. 3 switchable built-in tooth profiles. Infinitely variable feed gearbox. Linear feed system. Grinding wheel diameter: 250 mm. Central electric height adjustment for adapting to different blade widths. Heavy-duty support and return rollers. Machine was completely overhauled in 2005. Nkodpsyvtbgjfx Ahvjw