Used Soraluce Fl 6000 for sale (42)

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Credpsy Tkgbsfx Aiioi Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: used, Year of construction: 2007, functionality: fully functional, Travel ranges: X 7,500 mm Y 1,400 mm Z 1,000 mm Control system: Heidenhain iTNC 530 Codpfsz R Surjx Aiijri Milling head: Automatically pivoting diagonal milling head with 2.5° x 2.5° indexing Speed 4,000 rpm, tool holder SK50 Platen table 8,000 x 1,500 mm Mounted NC rotary table 1,000 x 1,000 mm Internal coolant supply Tool changer with 40 positions Chip conveyor in the X-axis direction 3-sided splash guard enclosure

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Codpfxottri To Aiiori Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Codpfovwgl Aox Aiisri Rapid traverse: max. 35000 mm/min

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, CNC Heidenhain TNC 426 30-tool changer SA 50 spindle with automatic tool changer Maximum spindle speed: 3000 RPM Table size: 6000 x 1100 mm Travel: 4500 x 1200 x 1000 mm Chip conveyor 4th axis Crjdpfozh U Hfex Aiiei Tooling

Year of construction: 2021, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 4500 mm TRANSVERSAL TRAVEL: 1300 mm VERTICAL TRAVEL: 1800 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 6000 x 1100 mm TABLE HEIGHT FROM FLOOR LEVEL: 850 mm Credpfx Aox Dfkgsiioi SPINDLE: 20-4000 rpm; 37-43 kW; 900-1045 Nm; ISO 50 HEAD: MILLING AND BORING AXIAL HEAD TOOL MAGAZINE: CHAIN-TYPE ; 60 POS CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 24800 Kg OVERALL DIMENSIONS: 6970 x 4310 x 4150 mm ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; TOUCH PROBE NOTE: OPERATOR'S PLATFORM

Condition: used, Year of construction: 2013, x-travel 6000 mm y-travel 4750 mm z-travel 1500 mm control Siemens 840 D SL Table Verschiebetisch table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head Credpfx Aijyr Aq Uoiei The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Crsdpsw Syv Ujfx Aiiji Operating hours: 4261 h

Year of construction: 2013, condition: used, Number of machnines 4 St Control Siemens Crsdpfx Aeyr Skkoiioi Tool changer 1 Pos Plant Consists of 4 Machines Soraluce FR 9000I Soraluce RR 9000II Soraluce FP 8000 Soraluce PM 6000 Workpiece Setup Stations Replacement Pallets Automatic Tool Supply System (WBG) Automatic Pallet System Pallet Storage Rack The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About Us More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, table length: 6,500 mm, table width: 1,100 mm, torque: 900 Nm, spindle motor power: 32,000 W, We are offering this used SORALUCE SP-8000 vertical milling machine with a moving column, manufactured in 2011. Model: SP-8000 Crjde Aaq Efepfx Aiioi Year of manufacture: 2011 Travel: 8000X1500X2000 Table: 6500 x 1100 Automatic head: 2.5° X 2.5° Spindle speed: 4000 rpm Spindle power: 32 Kw Spindle torque: 900Nm Number of tools: 40 Portable crank handle Chip conveyor If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2017, operating hours: 15,218 h, functionality: fully functional, machine/vehicle number: 5639, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 1,900 mm, position of the milling head: 0.001°, mount diameter: 50 mm, rotational speed (max.): 4,000 rpm, torque: 2,000 Nm, coolant supply: 70 bar, spindle motor power: 60,000 W, Equipment: documentation/manual, rotational speed infinitely variable, SORALUCE CNC gantry milling and boring center with complete equipment x-10000mm y-3600mm z-1900mm - Automatic indexing milling head H 342 0.001° x 0.001° - Additional long angular head 90° - Capto C6 tool holder, horizontal/vertical with automatic tool clamping - Main drive 60KW 2000Nm - Machine weight 80 t - Safety package for the rear machine area - Safety package for the working area - Heidenhain iTNC 640 - Dynamic Active Stabilizer - Cross-axis compensation - Automatic head changing system - Milling slide extension z-1900mm - High-performance milling head 4000 rpm 1531Nm 0.001° x 0.001° - Additional long angular milling head 90° 2000 rpm 700Nm - Capto C8 turning tool holder horizontal / vertical with automatic clamping - Fixed storage station for 8 heads - Heidenhain handwheel - Coolant tank 200 liters - Automatic tool changer 120-fold - Increased tool weight 35 Kg - SORALUCE rotary table, diameter 3500mm with 2000mm travel, payload 40 t - Measuring probe M+H Credsz Iy Irspfx Aiisi - Tool measurement M+H - Adaptive Control - Industry 4.0 machine status in real time - Swivel machining - 3-sided complete splash guard for the rotary table - Plate table 5000x3000x300mm - Chip conveyor - Teleservice remote diagnostics - 3D volume model - Interpolation turning HEIDENHAIN

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Credpfxoz Nhzde Aiiji Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Condition: used, Year of construction: 2008, functionality: fully functional, Travel ranges: X 3,500 mm Y 1,250 mm Z 1,000 mm Control system: Heidenhain iTNC 530 Codez R Su Espfx Aiijri Milling head: Automatically pivoting diagonal milling head with 2.5° x 2.5° indexing Spindle speed 3,000 rpm, tool holder SK50 Internal coolant supply 3 chip conveyors (2 longitudinal, 1 transverse) Four-sided splash guard enclosure in an enhanced special design

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. Crjdpfxjzi S E Uo Aiiei - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. KEY TECHNICAL DATA Machine year of manufacture: 2012 Capacities / Travel: Longitudinal (X): mm 8,000 Vertical (Y): mm 2,600 Lateral (Z): mm 1,500 Table size: Length: mm 10,000 Width: mm 2,500 Distance between grooves: mm 250 Paint finish: RAL 5011 (steel blue) RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Drive power: 100% ED 32 kW Spindle speed: min-1 20-4,000 Torque: Nm 900 Max. rapid traverse speed: X, Y and Z axes mm/min 25,000 Weight: kg approx. 34,200 Heidenhain iTNC530 Automatic milling head, diagonal, stepless Codszz H Emepfx Aiijri Tool changer (60 magazine slots) Chip conveyor Coolant system 20 bar & internal coolant Preparation for NC rotary table RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a rigorous selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: used, Year of construction: 2013, x-travel 30000 mm y-travel 3600 mm z-travel 1900 mm Control Heidenhain type TNC 530 i turning speeds 4000 U/min conus taper DIN 69871+AD mm Feed 10000 mm/min spindle drive 46 kW Rapid movement 25000 mm/min chip conveyor 2 St. Plate area 31000x2500 mm total power requirement 85 kW Soraluce No. 5619 Load hours 9332 On-time hours 27960 Panel array consists of: 1 panel 7000x2500 mm 4 panels 6000x2500 mm Credeyqtnnopfx Aiiji Optional: 4x clamping angles Tool package Clamping table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, Brand and Model: SORALUCE SP-5000 Crjdpfx Aez Ekdroiioi Type: Traveling column Cnc: Heindehain 426 Year: 2002 Octagonal Head Indexed Degree-by- Degree Vertical course 1.600 mm Cross course 1.200 mm Longitudinal course 3.500 mm Width of the T slots: 22 mm Weight máximum carrying load on table: 3.000 kg/ m² Motor power : 30 kw Taper : DIN-69871 -AD Speed range : 4.000 r/min Range of maximum working feeds: 5.000 mm/min Total machine width : 1.560 mm Quick course vertical axis: 15.000 mm/min Quick course cross axis: 15.000 mm/min Quick course longitudinal axis: 15.000 mm/min Maximum thrust from the spindle to the cutting tool: 11.000 N Internal cooling Machine equipped with a HIGH SPEED HEAD

Condition: used, Year of construction: 2013, x-travel 9000 mm y-travel 3200 mm Crsdjyr Aqzepfx Aiioi z-travel 1900 mm w-axis 700 mm V-axis 3000 mm control Siemens 840 D SL Table Drehverschiebetisch 2 Stück table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, Technical details: x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm milling head speed: 1 - 4000 U/min spindle taper ISO: 50 feed speeds: 1 - 10000 mm/min rapid traverse: 25 m/min milling spindle motor: 46 kW total power requirement: 85 kW dimensions of the machine ca.: 45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 Crjdpfx Aiovmzihjioi autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment *

Condition: reconditioned (used), Year of construction: 2016, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,300 mm, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, spindle speed (min.): 20 rpm, table length: 8,000 mm, table width: 1,100 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2016 Capacities / Travel distances: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Cross (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on the table surface: units: 7 Width of T-slots: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup Blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Type A Main drive: Drive power: 100% duty cycle 43 kW Spindle speed range: Max. spindle speed: 20 – 7,000 rpm Credexvx Amepfx Aiioi Torque: 900 Nm Feeds: X, Y, and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y, and Z axis 35,000 mm/min Base area SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, Diagonal H207 Adapter angle milling head SK50 with Hirth gearing Automatic tool changer, 60 magazine places Chip conveyor Preparation / integration of NC rotary table Adaptive control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for a profitable entry into our product lines. The machines offered in this line are procured by us through a strict selection process and undergo a thorough inspection (Deep-Dive Check). After intensive cleaning, any identified defects or faults are professionally repaired by our expert service team.

Condition: excellent (used), functionality: fully functional, Soraluce TR3 2500 radial drilling machine, drilling capacity in steel: 80mm, drilling capacity in cast iron: 100mm, boring capacity: 100mm, spindle diameter: 100mm, Morse taper: 5, quill stroke: 310mm, number of speeds: 12, ranging from 25 rpm to 1440 rpm, with slotted table or indexing head. Weight of the radial drilling machine: 11 tons + table or indexing head. Cedpfx Ajzbzy Hjiieri

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,000 rpm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 426, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Soraluce SP 8000 was manufactured in 2000. It features an impressive X-axis travel of 6,500 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 2,000 mm. The machine is equipped with a high-torque spindle motor and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Soraluce SP 8000 universal machining centre we have for sale. Contact us for further details. • Max. feed rate: 15,000 mm/min • Guideways: Heavy-duty linear/roller guideways with linear scales • Milling head: Automatic Huré-type universal head, 2.5° x 2.5° automatic indexing on both bodies • Spindle: taper ISO 50 / SK 50 (DIN 69871); direct/gearbox-driven high-torque motor • Tool changer and magazine: ATC with 30-tool chain-type, column-mounted; supports heavy-duty tooling (weight/length per standard) • CNC control: Heidenhain iTNC 530 / TNC 640 or Siemens Sinumerik Additional equipment Codpfszumgkox Aiieri • Chip conveyor (longitudinal, between table and column) • Coolant system (external supply to tool/head) • Enclosure (partial/perimeter protection) Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 2013, x-travel 9000 mm y-travel 3200 mm z-travel 1900 mm w-axis 700 mm V-axis 3000 mm control Siemens 840 D SL Table Drehverschiebetisch 2 Stück table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree Horizontal milling attachment Henninger angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Crsdpfxjyr Skdj Aiisi apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, x-travel 8000 mm y-travel 2600 mm z-travel 1500 mm V-axis 3000 mm control Siemens 840 D SL Table Schiebe- und Drehtisch 2 Stück table load max. 20 t turning speeds 100 U/min Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 43 kW faceplate 1800 mm Ortho head 1x0.001 degree Turning tool holder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Crsdpfsyr Aq Iox Aiisi If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Cedpfxexgn Efj Aiieri Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.