Used Solvent Recovery for sale (987)

Condition: good (used), Year of construction: 2017, operating hours: 6,870 h, functionality: fully functional, machine/vehicle number: 6700-111961, overall weight: 1,260 kg, load capacity: 205 kg, arm reach: 2,800 mm, This is an ABB IRB 6700-205/2.80 industrial robot with an IRC5 controller and an RW6 PC, manufactured in 2017. We would be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: 709-1 DeviceNet Master/Slave 888-2 PROFINET Controller/Device 963-1 PROFIenergy 997-1 PROFIsafe F-Device 687-1 Advanced Robot Motion 603-1 Absolute Accuracy 988-1 RW Add-In Prepared 606-1 Conveyor Tracking 608-1 World Zones 610-1 Independent Axis 611-Path Recovery 612-1 Path Offset Bedpfx Amoz H Uk Sjrswu 885-1 SaveMove 1180-1 ToolControl 613-1 Collision Detection 614-1 FTP, SFTP, and NFS client 616-1 PC Interface 688-1 RobotStudio APP Connect 623-1 Multitasking 624-1 Continuous Application Platform 813-1 Optical Tracking 625-1 Discrete Application Platform 628-1 Sensor Interface 689-1 Externally Guided Motion (EGM) 996-1 Safety Module 735-7 Keyless Mode Switch, 3 modes 1341-1 / 1520-1 Integrated Vision Interface 630-1 Servo Tool Change

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. Bodpfx Amozmaqaorswu More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Year of construction: 2008, condition: like new (used), PERISSINOTTO 45Kw pump. Production 25 cubic meters / hour Bwjdpfx Aju Avu Ujmrou No.2 dryer screen vibrators are missing, we can supply them new, price separately.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) Bwsdpowh Shcofx Amrsu • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional Options and Accessories = Other - Remote-controlled central locking - Lift axle - Air suspension - Fifth wheel coupling - Spotlights Other - Sun visor = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm. = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / Bwsdpfezc Rhcox Amreu = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, number of ink cartridges: 8, number of print heads: 1, Mimaki JV200-160 64inch Solvent Printer. Year 2025 Like new! In very good condition. Can send a video in operation printing. Machine can be inspected and tested in warehouse in Tadley Reading. Recently been serviced by Main dealer. Comes with PC, Paid Licence, Monitor. Bsdpfx Ajz Idfbemrswu

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Bodpfxez Ibduj Amrewu Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: excellent (used), mileage: 753,000 km, power: 265 kW (360.30 HP), first registration: 12/1988, fuel type: diesel, axle configuration: 6x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 16, suspension: steel, Year of construction: 1988, = Additional options and accessories = - Rotating beacon - Tool box = Notes = 6x2 Tow truck Two 20-ton winches Extendable boom German registration In very good condition!! Ready for immediate use = Further information = Axle configuration Suspension: Leaf spring suspension Front axle: Steerable Rear axle 1: Steerable Bwedpfozr Hlbsx Amrju Weights Unladen weight: 16,380 kg Payload: 9,620 kg GVW: 26,000 kg Functional Body manufacturer: ZF Environmental Emission class: Euro 0 Condition Technical condition: very good Visual condition: very good

Condition: excellent (used), Year of construction: 2019, operating hours: 23 h, functionality: fully functional, overall weight: 52 kg, load capacity: 4 kg, arm reach: 920 mm, Load capacity: 3.7 kg Bwjdjz Hdzgjpfx Amreu • Reach: 920 mm • Repeatability: ±0.02 mm • Maximum Cartesian speed: 11.1 m/s • Protection class: IP65 (wrist IP67 with optional compressed air unit) • Safety: Integrated safety functions (Safe Speed, Safe Stop, Safe Zone) with optional SIL3 / PL e certification • Design: Compact, modular design with front access for connections and modules. • Models: Available in various versions such as CS9 SE, LP, MP, and HP (depending on performance and size requirements). • Energy efficiency: Lower energy consumption compared to previous generations, as well as energy recovery during axis deceleration. • Software: Supports VAL3, uniVAL plc/drive, and VAL Blocks. Application areas • Electronics and pharmaceuticals • Cleanroom environments (up to ISO Class 2) • Medical and laboratory technology (e.g., as a MedX Ready version for surgical and medical applications)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW Bodpfx Amjygx Tzsrewu - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: excellent (used), The VAC-7HS abrasive recovery system is an electrically powered vacuum abrasive recovery system specifically designed for use with mineral abrasives, which typically generate more dust. The VAC-7HS abrasive recovery system is equipped with a particularly powerful side-channel blower, an integrated, high-performance cartridge filter with pulse-jet cleaning, a separate dust pre-separator SC-500 with manual emptying, and a 0.3 m3 open-air filter. It also includes a stationary storage silo for manual refilling of the blasting pot (manual shut-off valve), a bottom hopper, and suction hoses. The VAC-7HS abrasive recovery system can be used universally for recycling for further reuse or for a big bag filling station for the disposal of the mineral abrasive. Bwedjzarybopfx Amrsu

Condition: used, mileage: 136,735 km, power: 118 kW (160.44 HP), first registration: 11/2017, fuel type: diesel, tire size: 255/75R17.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: orange, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel-air, total length: 6,900 mm, total width: 2,350 mm, total height: 3,100 mm, loading space length: 4,950 mm, loading space width: 2,220 mm, loading space height: 900 mm, Year of construction: 2017, Equipment: ABS, AdBlue, cruise control, traction control, trailer coupling, = Additional Options and Accessories = Bwjdpfoz Dg E Njx Amreu - Air suspension - Radio - Sun visor - Tool box = Further Information = Tire size: 255/75R17.5 Front axle: Steered; Tire tread depth left: 35%; Tire tread depth right: 35%; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60%; Suspension: Air suspension Unladen weight: 4,350 kg Payload: 3,140 kg GVW: 7,490 kg Model number: 8-160L OPRIJ / MACHINE TRANSPORT = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: excellent (used), mileage: 339,751 km, first registration: 06/2001, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, suspension: steel, total length: 8,900 mm, total width: 2,250 mm, total height: 2,770 mm, Year of construction: 2001, = Additional options and accessories = - PTO = Notes = Despite our best efforts to ensure the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual vehicle. Bedpfoz Hxl Tex Amrewu TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further information = General information Cab: double Axle configuration Suspension: leaf spring Front axle: steered Rear axle: dual tires Weights Unladen weight: 6,100 kg Payload: 5,890 kg GVW: 11,990 kg Condition Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for further information.

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors Bedpfx Amsz Eh Iherswu * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: used, Year of construction: 2016, functionality: fully functional, number of ink cartridges: 8, color channels: 8, number of print heads: 2, resolution (max.): 900 dpi, paper width (max.): 1,600 mm, number of feeding trays: 1, total length: 2,945 mm, total width: 730 mm, total height: 1,310 mm, type of input current: DC, input voltage: 230 V, Roland TrueVIS VG-640 – Specifications Bedpfx Aez E U Ubemrjwu Brand: Roland DG Model: TrueVIS VG-640 Machine: Large-format eco-solvent printer & cutting plotter Year of manufacture: 2016 Condition: Used; print heads require thorough cleaning. Possible replacement recommended. Print width: maximum 1,600 mm Max. media width: 1,625 mm Ink: Roland TrueVIS TR2 Ink configuration: CMYKLcLmLk + M Max. print resolution: 900 dpi Print & Cut: Yes, integrated Cutting speed: 10–300 mm/sec. Cutting force: 30–500 gf Blade: Roland CAMM-1 series Media thickness (printing): maximum 1.0 mm with liner Media thickness (cutting): maximum 0.4 mm with liner / 0.22 mm without liner Heating: integrated print heater and dryer Dimensions including stand: approx. 2,945 × 730 × 1,310 mm Weight including stand: approx. 205 kg Software: Roland VersaWorks

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: Bodpfxezmxlpe Amrjwu - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Bwedpfx Amsz D Evyoreu Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % Bwedpfx Aozq Axzemrju • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: used, mileage: 1,000 km, power: 115 kW (156.36 HP), color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, = Further Options and Accessories = - Rear air suspension Bodpfx Asyfqnhemrowu - Front air suspension = Notes = - Mr. Rudolph will be happy to assist you by phone at: Iveco Daily 35S16 / Flatbed / Wheelbase 3,450 mm Cargo area dimensions in mm: L: 3,500 x W: 2,100 x H: 400, comfort driver's seat, reversing camera, rear parking sensors, light and rain sensor, AEBS emergency brake assist with City Brake, electrically adjustable and heated exterior mirrors, speed limiter 160 km/h, driver drowsiness warning system, traffic sign recognition with intelligent speed assist (ISA), air suspension, front airbags for driver and passenger with seatbelt tensioners, AdBlue tank 20 l, fuel tank 63 l between chassis side members, 8-speed automatic transmission, 12V 13-pin trailer socket, towing capacity 3.5 t, ball-type trailer coupling, 225/65R16 all-season tyres, and much more. Mr. Rudolph will be happy to assist you by phone at: Should you wish to lease or finance this vehicle, we will be happy to provide you with a tailored offer. We are also happy to trade in your used commercial vehicle. Errors and prior sale excepted! Further information can be found on our website: ... ESP, particulate filter = Further Information = Engine displacement: 2,287 cc gross vehicle weight: 3,500 kg Please contact Tobias Ebert for more information.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, Fully Automatic Solvent Cleaning System KP50 HMA For operation with solvents (hydrocarbons or modified alcohol) under full vacuum. The cleaning and drying process runs fully automatically in a closed working chamber under vacuum. Component cleaning is performed via spraying, turbulence flooding, ultrasonic cleaning, and vacuum-assisted cleaning with freshly filtered and distilled solvent from the two storage tanks. Additionally, the system offers vapor degreasing with ultra-pure solvent vapor directly from the main distillation system. The final vacuum drying step ensures components are 100% dry, and the dual condensation stage minimizes solvent loss as well as emission and workplace exposure values (AGW). Technical data / Equipment: - 2-tank FULL VACUUM system incl. main and bypass distillation - Designed for flammable solvents (FP >55°C) - Includes basket holder with swing/rotation device - Basket dimensions: 520 x 320 x 200(h) mm Bwodpfxsyi Sf Ns Amrou - Batch weight: max. 50 kg/batch - System dimensions: approx. 2,300 x 2,250 x 3,000 mm (W x D x H) - Ultrasonic: 750 W, 40 kHz - 2 bag filters size 1 + preparation for an additional filter - Automatic working chamber door - Working chamber door in glass - Double loading table (sideways movable) in front of working chamber - 12" control panel - Main and bypass distillation - Remote maintenance module A chiller unit can be supplied optionally, if no cooling water is available on site. Price excl. VAT, transport, assembly/commissioning

Condition: excellent (used), mileage: 270,348 km, power: 162 kW (220.26 HP), first registration: 03/2020, fuel type: diesel, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, traction control, = Additional Options and Accessories = - Alarm system - Armrest - Audio controls on the steering wheel - AUX input - Outside temperature display - Becker holder - Heated mirrors - Leaf spring suspension - DAB radio - Differential lock - Differential lock - Tachometer - Electric mirrors, heated - Extra lighting - Driver's seat height adjustment - Remote central locking - Speed limiter - Tinted glass - Hydraulics Bwedpfjzv Eupox Amreu - Adjustable steering wheel - Adjustable driver's seat height - Cabin - Folding exterior mirrors - Air conditioning - LED lighting - Air suspension - Center armrest - Multifunction steering wheel - Radio/CD player - Rotating beacon - Rearview camera - Disc brakes - Headlight height adjustment - Immobilizer - Tachograph - Touchscreen - Winch - Power take-off (PTO) - Power take-off (PTO) = Additional Information = Number of cylinders: 4 Engine displacement: 4,580 cc Unladen weight: 6,425 kg Technical condition: very good Optical condition: very good Damage: none Price: on request = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van, or truck. The indicated price is the "internet take-away price." For questions or to arrange a test drive, please contact us: SEE OUR ENTIRE INVENTORY AT All trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, mileage: 660,885 km, first registration: 08/2000, fuel type: diesel, wheelbase: 4,570 mm, fuel: diesel, color: white, gearing type: mechanical, Year of construction: 2000, Truck / Convenience Store MAN 12 224 First commissioned: 10.08.2000 Manual transmission 660,885 km Breakdown/sliding platform Length: 5.3 meters Width: 2.3 meters Height from the ground: 1.05 meters With hydraulically adjustable winch. With heavy-duty basket Payload: 4870 kg Bwjdpfx Amozic H Asreu Total weight: 11,990 kg Tires: +/- 30% Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, mileage: 743,776 km, power: 279 kW (379.33 HP), first registration: 06/1982, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 10, suspension: steel, total width: 2,500 mm, Year of construction: 1982, Equipment: crane, trailer coupling, = Additional Options and Accessories = - Lift axle Bwedjyvi I Nspfx Amrsu - Pintle hitch - Power Take-Off (PTO) - Radio - Sun visor = Notes = Original Dutch truck. APK / TUV / MOT: 02-17-2027 = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Tire size: 295/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 1: Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Weights Unladen weight: 15,350 kg Payload: 9,150 kg GVW: 24,500 kg Functional Crane: - Maintenance APK (Technical Main Inspection): Valid until 02/2027 Financial Information Price: On request Identification Model number: R142 V8 6x2 / TOW TRUCK = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase. Bjdpfxsz Et E Es Amrswu

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 5.27 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Year of manufacture: 2007 Serial number: 3705 Rated power: 25.0 kW Motor speed: 3,000 rpm Bwedpoz Eqa Tsfx Amrsu Max. operating pressure: 8.5 bar Frequency-controlled drive: SFC Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h