Used Software for sale (2,599)

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Hjdpfx Ajxhgfgeb Ijk Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total length: 1,670 mm, total width: 820 mm, total height: 930 mm, overall weight: 600 kg, input voltage: 240 V, plate width: 60 mm, plate length: 80 mm, SAATI LTS 6080 CTS (Computer-to-Screen) system in very good condition. The machine is used for direct laser exposure of coated screens for screen printing. No wax system – true direct exposure. Ideal for textile screen printing companies with frequent motif changes and in-house screen production. Resolution up to 2540 dpi – direct laser exposure – suitable for all common CTS emulsions. Maximum screen size: 60x80cm. The machine can be inspected onsite and tested with your own screens. Transport of the machine can be arranged by agreement and special arrangement. Included in the price: - Computer including keyboard, monitor, and mouse. - Machine software with all configuration and adjustment options. - Accessories (maintenance aids). Price on request. Sale excludes any warranty and liability for material defects. Oliver Bartsch GmbH – Cologne, Germany Hedpfx Aboyx Hfwj Iok For further questions, we are always at your disposal.

Condition: used, Year of construction: 2017, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, spindle speed (max.): 5,000 rpm, table length: 3,800 mm, table width: 1,000 mm, coolant supply: 40 bar, spindle motor power: 34,000 W, tank capacity: 1,500 l, spindle nose: ISO 50, number of slots in tool magazine: 40, Equipment: documentation/manual, 5-Axis Moving Column Machining Center FPT model TESSEN EVO 35 Heidenhain 640 CNC control X axis travel: 3,500 mm Y axis travel: 1,100 mm Z (vertical) axis travel: 1,500 mm Rapid traverses: 40,000 mm/min Table dimensions: 3,800 x 1,000 mm Automatic universal head with micrometric positioning (TUPCG) Spindle speed: 5,000 rpm Hedpfx Absyx E Uqo Isk Spindle taper: ISO 50 Tool changer: 40 positions Installed power: 68.2 kW Spindle motor power: 34 kW Complete with: - Heidenhain TNC640 CNC, 19" monitor - Remote control panel HR520 for Heidenhain CNC - External/internal tool coolant, tank 1,500 l, p=40 bar - Chip conveyor with discharge on right side - Internal tool cooling with compressed air - Workpiece washing gun with tool coolant, complete with hose reel, 10-meter hose, and dedicated pump - Laser probe and software for tool integrity check and tool length/radius measurement - Workpiece measuring and alignment probe USED MACHINE YEAR 2017

Condition: used, Year of construction: 2016, operating hours: 533 h, functionality: fully functional, overall weight: 160 kg, load capacity: 10 kg, arm reach: 1,420 mm, pivoting range: 180 °, controller manufacturer: KUKA, Used KUKA KR 10 R1420 robot in good condition, painted black. 100% fully functional. Year of manufacture: 11/2016 Available for purchase with the base shown in the photos or as a standalone robot. Sale based on invoice with 23% VAT. Inspection and testing possible in Gliwice. The set includes: - KUKA KR10 R1420 arm - KRC-4 compact controller - KRC4 SMARTPAD teach pendant - Set of control and power cables - Additional accessories - KSS 8.3 software Hsdsyhp Ewjpfx Ab Ijk - Packages: - KUKA ArcTech Basic - KUKA RemoteService 1.2 - KUKA GripperSpotTech 4.0 - KUKA ProfiNet Controller/Device

Condition: excellent (used), functionality: fully functional, overall weight: 3,200 kg, type of input current: three-phase, total width: 2,200 mm, total length: 6,000 mm, total height: 1,600 mm, input voltage: 400 V, input current: 32 A, AUTOMATED DIGITAL CORRUGATED PRESS - PKG1300 The device is technically functional, used only for testing. Includes the original first set of heads (requires service/replacement) plus two additional heads. Konica Minolta PKG-1300 industrial digital printer for corrugated and folding carton applications. Designed for short-run production, customized packaging, prototypes and on-demand box printing. Equipped with automatic feeding and stacking system, Ergosoft RIP, and water-based pigment ink technology. The Konica Minolta PKG-1300 is ideal for producing: Hjdpfsyx E Dxex Ab Ijk -folding cartons, -corrugated boxes, -promotional packaging, -short-run branded packaging, -sample and prototype packaging, -custom packaging for e-commerce and retail markets. It is a suitable solution for: -short-run packaging production -print-on-demand box printing -customized packaging -sample and prototype jobs -promotional and seasonal packaging Printer specifications Resolution: High resolution: 1,200 x 1,200 dpi/Low resolution: 600 x 1,200 dpi or 300 x 1,200 dpi Print Speed: High resolution: 9 m/min./Low resolution: 18 m/min. or 27 m/min. Ink: Pigment ink, 5 liter tanks Power Consumption: Printer: 8,000 W, Web Cleaner: 5,500 W/Single Power Plug for complete system: 400 V AC, 50 Hz, 3-phase, 32 A Weight: 1,200Kg Feeder specifications Media: Cardboard plates from 1mm to 50mm thick Max. Feed size: 1,300 mm wide x 1,600 mm long Min. Feed size: 300 mm wide x 400 mm long Feed speed: Up to 27 m/min. Max. Feed pile: 400 mm Power Consumption: Feeder: 3,500 W/ Circuit protection RCCB 4P, 40 A, 300 mA, C, 10 kA (must be provided by the customer) Weight 1,100 kg Stacker specifications Media Cardboard plates from 1 mm to 50 mm thick Max. Board size: 1,300 mm wide x 1,600 mm long Stacking speed: Up to 27 m/min. Max. Staking pile: 700 mm Power Consumption: Stacker: 3,500 W/ Circuit protection: RCCB 4P, 40 A, 300 mA, C, 10 kA (must be provided by the customer) Compressed air: 6 bar, 50 l/min., 8 mm outside diameter Weight: 900 kg Software Internet connection: 24/7 requirement Platform: PC/Windows-based Controller: Ergosoft RIP Interface: PC-based Operating environment Operation: 20°C – 30°C Humidity: 50 % – 70 % RH (non-condensing) Shipped on original pallets. Assistance with transport arrangements is available. Price is negotiable.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1235, controller manufacturer: Germany Beckhoff, working width: 1,200 mm, bending angle (max.): 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, total length: 1,685 mm, total width: 1,262 mm, type of input current: three-phase, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, opening width: 400 mm, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. - No need to change bending tool. Hodjwfwkqspfx Ab Iok - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process - Automatically check and optimize. the process -All servo motor control, fast and energy saving - Automatically control pressing force.

Year of construction: 2020, operating hours: 1,000 h, condition: used, functionality: fully functional, KAMA ProCut 76 Foil – Die-Cutting and Hot Foil Stamping Machine Model Year 2020 | High-End Configuration | Industrial Quality “Made in Germany” For sale is a KAMA ProCut 76 Foil from the 2020 model year. This machine is engineered for demanding die-cutting, embossing, and hot foil applications, making it ideal for carton, packaging, and finishing companies with high quality requirements. Features & Highlights • High-performance die-cutting machine for paper, board, and plastics • Integrated hot foil stamping system for premium finishing • Very high production output with excellent precision • Robust, durable machine design • Servo-controlled feeder and transport table with electronic double-sheet control • High degree of automation and reproducible quality • CE-compliant, Made in Germany Standard Equipment • Motorized platen pressure adjustment (MPC) • 4+1 system with base plate and 1 set of 1-mm counter plates  – 5× medium, 1× hard • 1 standard chase with fine adjustment for steel rule tools (full format) • 3 pile trolleys for feeder and delivery (plus 4 additional pile trolleys) • Servo-driven feeder and transport table • Electronic double-sheet control • 1 set of KAMA fastening elements • 1 set of mounting elements for 15° dies on KAMA carrier plate • Industry 4.0-ready for remote maintenance and network integration Special Equipment & Options • Integrated hot foil stamping  – Mobile frame with integrated heating system  – 4 or 6 heating zones  – Two foil draw motors  – Powered rewind shaft  – Two tool carrier plates  – Foil-Saver software for foil optimization • KAMA AutoRegister  – Maximum registration accuracy  – Especially suited for digitally printed sheets • Pneumatic tool clamping (76 only) • Die-cutting force display with overload protection • Universal chase • Chase rack • Vacuum pump and compressor • Servo main drive for asynchronous drive cycle  – Up to 50% higher machine speed  – Alternatively, extended contact time for hot foil stamping Technical Data (excerpt) • Machine type: KAMA ProCut 76 Foil • Model year: 2020 • Maximum sheet size: 760 × 600 mm • Minimum sheet size: 279 × 210 mm • Maximum die-cut size: 743 × 585 mm • Material range:  – Paper from 100 gsm  – Board up to 1,500 gsm (approx. 1.8 mm)  – Plastics such as PET, PP, PVC • Production speed: up to 5,500 sheets/h • Die-cutting force: 165 tons (1.65 MN) • Gripper margin: 10 mm • Machine dimensions (L × W): 4.87 × 2.69 m Applications • Die-cutting of folding cartons and packaging • Hot foil stamping for premium enhancements • Carton, paper, and plastic applications • Post-press finishing of digitally printed sheets with highest register requirements • Short and medium runs with maximum precision Hodpfx Abeyc Hmue Isk Conclusion The KAMA ProCut 76 Foil is a highly flexible, high-performance die-cutting and hot foil stamping machine for professional users. With comprehensive standard and special equipment, state-of-the-art servo technology, and Industry 4.0 readiness, it offers an outstanding overall package for demanding production environments.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit Hodpfxouxfu Nj Ab Iek - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2008, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm Control FANUC 320iA 3 x internal grinding spindles 2x HV-X 100-90000/3 Housing diameter: 100 h5 mm Spindle speed max: 90000 min/1 Nominal/max. power: 2.5/3.0 kW Spindle nose: D10/18 Spindle cooling: Water 1x HS80c 120000/1.1 Housing diameter: 80 h5 mm Spindle speed max: 120000 min/1 Nominal/max. power: 0.8/1.1 kW Spindle nose D06/12 Spindle cooling: Water 1 x external grinding spindle: MMO-100 HSK-C50/4 Diameter: 100 h5 mm Maximum speed: 3770 min/1 Nominal/max. power: PS1/PS6 - 6.0/7.0 kW Clamping system: HSK-50/M12 Grinding wheels: Diameter 125-200 x 2-20 mm 1 x dressing spindle MHF-72 D40/16 Housing diameter: 72 h6 mm Maximum speed range: 16000 rpm Power S1/S6: 400/500 W Spindle nose: 40 mm/8xM5 on TK 56 mm Spindle nose: 40 mm/4xM5 on TK 32 mm 1 x measuring probe (longitudinal positioning) Etamic C25 Hsdpox Dxw Hofx Ab Isk Abrichteinheit für das automatische Abrichten mit Hydraulisch einschwenkbarem Arm. Präzisions Positionierung und Einrastung mittels Konischem Bolzen, geschliffen und gehärtet. Schwenkbewegung : Hydraulisch Schwenkgeschwindigkeit : Einstellbar 1 x Messtaster (Längspositionierung) Etamic C25 X-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut Z-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut B-Achse Fahrweg: +60°..- 91° Auflösung Winkelmessgeber: 0.0005° Auflösung Antrieb: 0.0001° Vorschub: 25°/Sek Messung: Winkelmessgeber Absolut Revolver Anzahl Position 4 Zeit beim Wechseln 5 Sek Möglicher Spindeldurchmesser: 0 100 mm Werkstück- Spindeldrehzahl max.: 1'000 min-1 Spindelstock Leistung max.: 1.8 kW 960-41 Spindelnase: A2.4/MK5 Ausrüstung Anschnitterkennung Anschnitterkennung und Prozessoptimierung zur Optimierung des Schleif- und Abrichtprozesses und zur Verkürzung des Luftschleifens. Signal über Körperschallsensor auf dem Werkstückspindelstock aufgebaut, bestehend aus: -1x AE-Auswertsystem mit Display AE4100 -1x Kabel -1x Software und Anbauaufwand inkl. Material Sensor und Empfänger für Abrichtspindel - 1x Ringsensor - 1x Ringempfänger Sensor und Empfänger für Spindelnase A2.4/MK5 Elektroschrank mit CNC-Steuerung FANUC 320i A und Bedienungskonsole mit Bildschirm 15" Color LCD TFT 1024 x 768 Bedienpanel 55 Tasten und LEDs PC Tastatur QWERTY Intel Pentium III 866 MHz Windows XP Professionnal Combitec HMI für FANUC 320i A Standard Programmiersprache nach DIN/ISO Werkstattorientierte Schleifzyklen (WOP) Mobiles Handrad mit Wahlschalter 0.001, 0.01, 0.1 mm und Achsenwahlschalter Vorschub Korrektur über Raster-Potentiometer 0-100 % Spindelgeschwindigkeits-Korrektur über Raster-Potentiometer 50-125 % RJ-45 Ethernet mit TCP/IP Software und Zubehör für das Radius und Konus schleifen mit PC Simulation und CNC-Bahnkontur schleifen Vollautomatisches Schleifen eines Radius G71 und/oder eines Konus G72 ab einem bestimmten Winkel auf einen...

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter Hodjuxfucopfx Ab Iok -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, Equipment: cooling unit, For sale, as new and in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm Sales price 120 000 CHF ex works (built new for 500 000 CHF) 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available Hsdpfx Aovy T Ivob Ijk The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station Hodpfx Abjyl S Nyj Iek - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 50,000 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Hedpfx Aeyxz Umob Isk Model: FTI-110s Production Capacity: 130-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2014, operating hours: 11,517 h, Empty weight: 6.000 kg Price: On request - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Enclosed fence, Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 2 Hjdpfx Asx E Uk Ueb Iek - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - CNC documentation available: USB stick - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels Hedjywk Elopfx Ab Iek

Condition: good (used), Year of construction: 2020, functionality: fully functional, 1.753 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC MAZAK VARIAXIS i-800 5-Axis Machining Center Year of Manufacture October 2020 Commissioning 2021 Smooth X Control Pallet Changer, 2 Pallets Travels: X-Axis: 730 mm Y-Axis: 800 mm Z-Axis: 560 mm A-Axis: -120° to +30° C-Axis: ±360° Max. Spindle Speed: 10,000 rpm SK-50 Tool Holder, DIN 69871 -Tool Magazine for 120 Tools -Prepared for Hydraulic Clamping incl. Pallet Clamping Function -Automatic Pallet Changer -Electronic Handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High-pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 laser -Air blow-off on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 probe -Robot interface -Various Software Options MAZAK VC PRIMOS 400 L Vertical Machining Center Year of manufacture 2020, installed 2021 Mazatrol Smooth C Travels X: 500 mm Y: 400 mm Z: 350 mm Hedpfoywii Njx Ab Iok Table size: 600 x 400 mm Max. table load: 300 kg Milling spindle AC 11 kW Max. spindle speed: 12,000 rpm 14 tools, BT30 -2 hydraulic connections -Automatic door -Oil mist lubrication -Signal light -Airflow through rotating spindle -Mazak Monitoring B, incl. Renishaw OMP40 probe -Robot interface -Various Software Options CELLRO ELEVATE E-110-165 Robot cell with parts storage Elevate W 2000 mm – H 4000 mm Fanuc robot R-2000 165F iC Fanuc robot max. payload: 165 kg max. handling weight: 90 kg Automatic gripper change system Manual gripping force control Workpiece rotary station Workpiece measuring station SPC trays for measuring parts during the process Air blow-off station Various trays 1600 x 550 mm Loading with extendable tray Interface for 2 Variaxis i-800s and one VCP400L

Condition: used, functionality: fully functional, mileage: 239,397 km, power: 338 kW (459.55 HP), first registration: 11/2023, fuel type: diesel, overall weight: 8,441 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Hodpfeywgzcsx Ab Iek I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Single energy battery system (2 batteries) D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/60R22.5 Drive Axle Tyre Size: 315/60R22.5 Fifth Wheel Type: SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.17:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) Hjdpfx Aboxuvk Es Isk - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Hsdpfoywg Sbsx Ab Iok Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2018, operating hours: 35,069 h, condition: ready for operation (used), product length (max.): 4,400 mm, number of axes: 4, Vacuum Reflow System VAC-L Plus manufactured in 2018. It features a comprehensive heating configuration with 5 preheating zones and 4 peak zones, along with a vacuum chamber measuring 450 x 510 mm. The typical conveyor speed is 1.3 m/min, and it includes a single lane chain conveyor. If you are looking to get high-quality reflow capabilities, consider the SMT Vacuum L Plus Vac machine we have for sale. Contact us for further details. • Heating configuration: 5 x preheating zones, 4 x peak zones, 1 x vacuum chamber • Cooling configuration: 3 x zones standard (up to 5 optional) • Typical conveyor speed: 1.3 m/min • VAC cycle time: approx. 38 s per lane • Vacuum chamber dimensions (L x W): 450 x 510 mm (max. product) • Vacuum chamber cycle time extension: approx. 8–13 s • Process gas cleaning: 3 x high-temperature ABS • Fan speed control: Infinitely variable via frequency converter (5 pcs total) • UPS voltage: 24 V • Nitrogen residual oxygen display: DRSM011 • Nitrogen measurement display: PC monitor • Conveyor type: Single-lane chain conveyor (pin chain) • Conveyor width: 65–510 mm • Conveyor rail: Fixed rail front (Rail 1) • Chain pin length: 3 mm Hsdpfx Ajywg Ngeb Ijk • Center support height/drop: 10 mm / 10 mm • Network interface: Ethernet • Handling interface: SMEMA (IPC/SMEMA-STD1) • Cooling zone lengths: Zone 1 = 585 mm; Zone 2 = 473.5 mm; Zone 3 = 473.5 mm • Cooling water requirement: < 15°C and 15 l/min • Barcode interface: RS232 • Monitoring sensors: PT100 (Guard software) Additional equipment • Included: Not specified • Option compatibility (not included unless stated): • Nitrogen options: RE0004, RM0002, VA0002, RE0005 • Cooling options: RE0026, RE0066, RE0067, RM0008 • Process monitoring options: RE0007, AL0011

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Hjdpew S I Dgofx Ab Ijk Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Year of construction: 2015, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces are mounted vertically (suspended). Accessories: Total enclosure, Software for woodworking tools Software for P-system peeling cutters Software for scoring saws/radius cutters Software for 360° path programme Software for 360° peeling cutters Workpiece magazine N250 (pallet magazine for max. 28 workpieces), Disc changer for up to 6 eroding/grinding discs, Adaptation to A-axis on HSK 63- F, Coolant system with pump & cooling unit Automatic central lubrication Automatic fire extinguishing system Automatic shut-off flap Gripper fingers for workpiece automation, 4 workpiece holders for workpiece magazine, 1 exchange element with flushing kit, Mechanical mist separator N183, Test mandrel HSK63F. Maximum workpiece outer diameter.: 320 mm workpiece length: max. 250 mm Travel path X1: 520 mm Bore diameter: Max. 60 mm Travel path Y1: 970 mm Travel path Z1: 420 mm Rotation range axis E1: 210° Grinding spindle speed infinitely variable: 0 - 4500 rpm. Rotation range axis A1: 360° Rotation range axis B1: +/-20° Connected load approx.: 8.7 kVA / 6.8 kW (400 V/50 Hz) Weight approx.: 7100 kg Dimensions L x W x H: 4012 x 2889 x 2611 mm Hodpoxy Ryrofx Ab Iek colour: RAL 7047 telegray 4 / RAL 7045 telegray 1

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Hjdpfsxy Rx Isx Ab Isk Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Hjdpfjxy Rxhjx Ab Isk Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Year of construction: 2017, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard materials. Workpieces are mounted vertically. Accessories: Total enclosure External PC incl. CAD/CAM and ExLevel Pro software Software package with additional functions for metalworking tools, Wheelchanger for up to 6 eroding/grinding discs, Adaptation to A-axis on HSK 63-A-E Coolant system with pump & cooling unit Automatic central lubrication Automatic fire extinguishing system Automatic shut-off flap Hedpexy Ry Ssfx Ab Iek Glass scales on the X, Y & Z linear axes, Mechanical mist separators N280, 3 grinding wheel change elements Test mandrel HSK63A. Also available with workpiece magazine as an option! Workpiece outer diameter: max. 320 mm Tool outer diameter: Max. 200 mm workpiece length: max. 250 mm Bore diameter: Max. 60 mm Travel path X1: 520 mm Travel path Y1: 970 mm Travel path Z1: 420 mm Rotation range axis A1: 360° Rotation range axis B1: +/-20° Rotation range axis E1: 210° Grinding spindle speed: stepless 0 - 4500 rpm (torque 6Nm) Connected load: approx. 8.7 kVA/ 6.8 kW mass: approx. 7100 kg Dimensions: W x D x H = 4012 x 2889 x 2611 mm colour: RAL 7047 telegray 4 / RAL 7045 telegray 1