Used Snow Chains for sale (2,887)

Condition: used, axle configuration: 2 axles, first registration: 11/2010, total length: 13,580 mm, total width: 2,600 mm, suspension: air, tire size: 445/45 R 22.5, wheelbase: 9,000 mm, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Refrigeration/deep-freezing unit - Air suspension - Disc brakes = Further information = Axle configuration Tyre size: 445/45 R 22.5 Axle brand: Other VALX Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 70%; tyre tread right: 70% Rear axle 2: Tyre tread left: 20%; tyre tread right: 20% Dcsdpfoxuhqwjx Ab Tor Weights Unladen weight: 7,560 kg Payload: 30,440 kg Gross vehicle weight: 38,000 kg Functional Loading platform height: 120 cm Condition Damages: none Identification Registration number: OL-76-FP

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides Djdpfx Abstp S E Eo Tecr – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Dodsrx Tatopfx Ab Tocr Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: used, Year of construction: 2014, Field of application: Agriculture Dsdoxx H Hfepfx Ab Tecr Please contact ATS Norway for more information Please provide reference number upon request: 21774 Specifications: 2014 model Weight: 2100 kg Throwing wing on the right side Ready for delivery Own weight: 2100 Model: Klappvinge skuffe

Condition: used, Year of construction: 2019, Slide 240cm 3-point connection hydraulic control Condition: Used Year of construction: 2019 Dedpfx Aoxzclcjb Tjcr

Year of construction: 2010, condition: good (used), Double mitre saw DGS400 for 45° (frame) cuts with digital left stop. Drilling or dovetail milling machine T20NC for frame assembly. 4 motors at 1.1 kW. Speed: 26,500 rpm. Direction of rotation: right and left. Milling cutter / drill bit. Dsdpfoxxytxsx Ab Tocr

Condition: new, functionality: fully functional, Year of construction: 2023, STIHL Rescue Saw MS 462 C-M R Ideally suited for fire brigade and rescue operations. It features an additional handle for quick and easy cutting depth adjustment. Equipped with the special Rapid Duro R saw chain reinforced with tough carbide plates, STIHL M-Tronic with calibration function, a high-performance oil pump with adjustable output for high delivery volume, an HD2 filter with radial seal, and tool-free tank caps for safe and easy refueling. Dcodpexwndcsfx Ab Tor Weight: 6.5 kg Power: 4.4/6 kW/hp Displacement: 72.2 cm³ Guide bar length: 50 cm Vibration value left/right: 3.3/2.7 m/s² CO2 emissions: 697 g/kWh Sound pressure level: 108 dB(A) Sound power level: 119 dB(A) Saw chain pitch: 3/8'' Power-to-weight ratio: 1.5 kg/kW Subject to errors and changes! Delivery may be possible upon arrangement! For further questions or to arrange a viewing, please feel free to contact us!

Condition: as good as new (ex-display), Chainstitch with knife sewing machine Dedpfxjpviphs Ab Tocr 3 trasnport wrinkling and cutting in one operation. Stand for shirring with edge cutter - the effect of rationalization thanks to the joint stitching of pattern patterns with fleece and the cutting of excess fleece. Accurate deburring is also possible with voluminous filling materials and intense wrinkling thanks to the stable edge cutter with high knife stroke and smooth cutting motion.

Condition: good (used), Chainstitch-Multi-Needle Quilter Mammut VMK 250 cm Dcsdpfslx Dgpox Ab Ter

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Motor power: 11 kW - Guide bar length: 1700 mm - Chain lubrication - Mobile construction - Machine dimensions: 150x80x290 cm Dodpfx Ajw Iqflsb Tocr - Weight: 200 kg

Condition: new, Good snow plow for making paving accessible. Suitable for the 3-point hitch in category II or III. Suitable for tractors from 80 to 150 hp. Condition: New Dodsxzck Eopfx Ab Tocr

Condition: ready for operation (used), Technical characteristics Blade diameter : 400 mm Cutting width : 180 to 3100 mm Cutting width : 400 mm Radial cutting from 0° to 45 Air-cushion table Workpiece clamping by pneumatic cylinder system Dsdpfx Aeucirdjb Tscr Uniaxial electronic positioner for automatic control of cutting length Accuracy of +/- 0.2 mm 5-digit digital display 99 memorized dimensions Control panel Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 4 CV Overall dimensions Lenght: 7000 mm Width: 2000 mm Height: 1500 mm Weight: 1800 Kg

Condition: new, Year of construction: 2019, Working width: 300 cm Dozer blade width: 3000 mm Dedpfjxzcgtsx Ab Tocr

Condition: new, Shovel snowplow - heavy - standard Djdpfx Aboxzcdxe Tjcr Condition: New

Condition: new, total height: 750 mm, As new snowplow 3 meter wide blade, working width in angled position approx. 2.75 m Blade height 75 cm Blade consists of 2 sections, each with 6 steel springs as obstacle protection Hydraulic angling With pivot point for uneven surfaces Three-point hitch Width marker lights Condition: New Dcsdpoxzcdfjfx Ab Tjr

Condition: used, Required tractor power: 150 hp Dozer blade width: 2600 mm Dcjdpfx Aexzcatsb Tsr

Condition: new, total height: 860 mm, Required tractor power: 25 hp Dedpfoxzb Upsx Ab Tecr

Condition: new, Robust snow blade Dsdjxzb Sbspfx Ab Tscr Suitable for use with front linkage Equipped with vertical overload protection Rubber edge and two cylinders for angling the blade left or right Various widths in stock from 1.20 to 3 meters Condition: New

Condition: new, Snowploughs with spoon insert, so suitable for shovel, front loader, telehandler and forklift. Available in 120, 160, 180 and 200 cm wide. Condition: New Dedpfexzb R Rox Ab Tscr

Condition: new, Required tractor power: 100 hp Dcodpfexzb Rwox Ab Ter

Condition: new, No. 2076 Boxer Snowplough with adapter for shovel - Euro - Spoon + front linkage - Cat 1 > Cat II Dcedpfx Abexzb Ehe Tor Condition: New

Condition: new, This slide is equipped with an extra attachment for sliding a large amount of material. Ideal for sliding snow, for example. Dcodpfx Abjxw Ufge Tsr Condition: New

Condition: used, Year of construction: 2004, Snow Plough    • Working width: 1800 mm    • Hydraulic angling    • Work lights    • Direct from operation Condition: Used Djdpfx Asxtm Rgob Tecr Year of manufacture: 2004

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Dsdpfxsxx Rz Ts Ab Tecr Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Automatic tool change system with 20 positions and chain 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Perimeter safety fence Motorized conveyor belt for chip extraction Vacuum pump

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg Dcodpfx Asxzfwbeb Tjr - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit