Used Snow Chains for sale (2,888)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 63,400 h, General Data Measurements width 3000 mm Measurements depth 4800 mm Measurements height 4000 mm Machine weight 20000 kg Main Drive Spindle speed range 30-10000 Number of axis 4 Table Number of tslots 7 Table load 1500 kg Dledpox D E Ixsfx Ab Toa Tools Max weight 8 kg Max tool diameter 85/135 mm This 4-axis AXA VPC-40-U vertical machining centre was manufactured in 2003. It features a robust 30 kW AC hollow shaft motor with a speed range of 30-10,000 rpm and a spindle torque of 143 Nm. The machine includes a 36-pocket chain magazine with a rapid tool change time of approximately 6 seconds. Consider the opportunity to buy this AXA VPC-40-U vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 Djdpfx Ajx Ddcujb Tjla (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Year of construction: 2017, Universal Machining Center Machine type: DMG DMF 260 / 11 linear Control: CELOS Siemens 840D sl Operate Year of manufacture: 2017 Dedpsx Dr Urjfx Ab Tela TECHNICAL DATA: Travel distances: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Rapid traverse (X/Y/Z) [m/min]: 80 / 60 / 60 Spindle speed range [rpm]: 20 - 15,000 Options: - Main spindle: 15,000 rpm, 46/30kW, SK40 - Dynamic package rapid traverse x-y-z: 80/60/60m/min - X-axis linear motor - Separate electronic handwheel - 60-position chain magazine - Bed flushing via M-function - High-pressure coolant pump 40 bar - 600L coolant tank with paper band filter - Rotary table integrated into table - B-axis in head - Automatic door - Coolant gun - Spindle probe - 2 pcs. Roto clear - Scraper belt chip conveyor This offer is non-binding and subject to prior sale. Changes, errors, and interim sale expressly reserved.

Condition: good (used), mileage: 142,324 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 04/2022, loading space width: 1,680 mm, loading space height: 1,390 mm, emission class: euro6, color: black, driver cabin: day cab, number of seats: 9, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, = Additional options and accessories = - Electric windows - Electric mirrors - Tinted windows - None = Remarks = Configuration: 4x2, Curb weight: 1,982 kg, Gross weight: 3,200 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2,000 kg, Cabin type: double cab, Cruise control, Air conditioning, Number of airbags: 2, Rear wiper, Parking aid: None, Tinted windows, Electric windows, Electric mirrors, Radio/Cassette, Carplay, GPS navigation, Color: Black, Metallic paint, Service manual, Heated mirrors, Lighting type: Halogen lamp, Climate control, Bluetooth, Engine power: 100 kW (134 Hp), Fuel: Diesel, Euro: 6, Drive timing: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Roof rack: None, Side doors: 1, Side windows: 4, Rear closure: tail lift, Central locking, Number of seats: 9, Seat configuration: 3+3, Seat material: Leather, Seat adjustment: Manual, TOURER XL, 8 seats, AC, navigation, camera, side bars, Spare wheel, Spare wheel tread: 5%, Tire type: summer tires = Further information = General information Number of doors: 1 Dljdpfx Aox Dq Hyeb Tja License plate: P-436-LK Axle configuration Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread left: 5 mm; Tire tread right: 6 mm Axle 2: Tire tread left: 6 mm; Tire tread right: 4 mm Dimensions Dimensions (L x W x H): 537 x 190 x 191 cm Weights Kerb weight: 1,982 kg Payload: 1,218 kg GVW: 3,200 kg Functional Loading platform height: 55 cm Maintenance APK (roadworthiness inspection): valid until 04.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Lease price: €461 per month (bestelbus, 72 months); Please inquire for further information and terms

Condition: excellent (used), Crab unit by KONECRANES, type: CXT4410050P3M5FBLON, year 2002, including electrical diagram. Load capacity: 5000 kg, max lifting height: 6 m, with fast and fine lifting, and pendant control. In very good condition. Djdpfx Aboxiw Nrj Tela

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Djdpfx Ajx Dnb Usb Tsla Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2022, Additional Equipment Anti-adhesive spray unit "AAR" - Complete with 2 sprayers and a storage container Spray device for finishing the edge Top pressure with belt Motors with power 4 kW for RT/E pre-milling unit "SGP" glue container with NC dosing Djdsx D Rl Aopfx Ab Tsla Ceramic lamps with infrared rays "MultiEdge" device for the RI/S flush milling unit This SCM Stefani MD RM edgebander was manufactured in 2022. It features adjustable chain feed speeds of 10-22 m/min and handles edge thicknesses up to 15 mm. Equipped with a pre-milling unit, glue unit with quick-change capabilities, and a cutting unit for precise edge finishing. The Maestro active edge control system enhances user interaction for optimal performance. If you are looking to get high-quality edgebanding capabilities consider the SCM Stefani MD RM machine we have for sale. Contact us for more information. Application Types Edge Banding

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min Dljdpfx Abjx Dmn Ts Tja The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 2022, spindle speed (min.): 12,000 rpm, Machine type: CNC-BAZ vertical Model: M1 Pro with 4th axis including tailstock Dljdpfox Dr D Tox Ab Tea Manufacturer: DMGMORI Control: Siemens 828 D Year of manufacture: 2022 Location: Germany Technical data Travel range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Max. workpiece weight approx. 600 kg Max. speed approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Holder taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Equipment Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24-place chain magazine - SK40 - Coolant tank - IKZ pump 20 bar - Filter for coolant - Bed flushing switchable via M function - Coolant spray gun - Spindle blowing air switchable via M function - Cabin roof - Measuring probe - 4th axis (Errors in the technical data and information excepted)

Condition: used, mileage: 165,016 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 09/2021, loading space length: 4,350 mm, loading space width: 2,070 mm, loading space height: 2,280 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 225/65R16, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, tail-lift, traction control, trailer coupling, = Additional Options and Equipment = - Electric windows - Electric mirrors - None - Tail lift = Remarks = Configuration: 4x2, Unladen weight: 2,724 kg, Gross weight: 3,500 kg, Tow bar, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: none, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Colour: white, Heated mirrors, Rear view camera, Lighting type: halogen lamp, Bluetooth, Engine output: 107 kW (143 hp), Fuel: diesel, Euro 6, Drive technology: timing chain, Transmission type: manual, Gears: 6, Power steering, ABS, ASR, starter battery, side paneling, Roof rack: none, Number of side doors: 1, Rear closure: tail lift, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat cover: fabric, Seat adjustment: manual, Tail lift, Tail lift version: tailgate, Tail lift capacity: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: steel and aluminum, Tail lift size: 211x159, Battery for ramp, Box truck tail lift side door spoiler air conditioning Euro 6!, Spare wheel, Tire type: winter tires = Further Information = General information Number of doors: 1 Registration: KLEYN1 Transmission Transmission: 6-speed manual Axle configuration Dsdpfxox Dq Hgs Ab Tsla Tire size: 225/65R16 Brakes: disc brakes Axle 1: Tire tread left: 6 mm; Tire tread right: 6 mm; Suspension: coil spring Axle 2: Tire tread left: 8 mm; Tire tread right: 7 mm; Suspension: leaf spring Dimensions Dimensions (L x W x H): 715 x 220 x 312 cm Weights Unladen weight: 2,724 kg Payload: 776 kg Gross vehicle weight (GVW): 3,500 kg Functional Tail lift: Dhollandia, tailgate, 750 kg Load floor height: 77 cm Maintenance MOT (general inspection): valid until 09.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 2 Financial Information Lease price: €351 per month (panel van, 72 months); Please inquire for more information and terms

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, 2 pieces electric chain hoists with travel motor Manufacturer: LIFTKET Type: K 3000 Year of manufacture: 2008 Chain hoists with fast and fine lifting, travel motor, with radio control, in very good condition. Lifting height: 3 meters Load capacity: 3000 kg. Dodjxr Dw Uopfx Ab Tela

Condition: excellent (used), CATALOG NUMBER 7044 TECHNICAL SPECIFICATIONS Dodpfx Asmih Sfsb Tola - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum workpiece length: 620 mm - 4 upper slip rollers - Upper rollers serve as material hold-down - Bottom feed chain - At the outlet: 1 upper and 1 lower metal slip roller - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total discharge tray dimensions (L/W/H): 3150x700x870 mm - Overall machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg – Very good condition, – Used saw Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, General Data Measurements width 3500 Measurements depth 6500 mm Machine weight 9000 kg Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Number of axis 4 Movement X-Axis Rapid Traverse 28000 mm/min Y-Axis Rapid Traverse 28000 mm/min Z-Axis Rapid Traverse 28000 mm/min X-Axis Movement 1600 mm Dledpfx Asx D H Sxjb Toa Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Table load 150 kg Tools Slots in storage 44 Max weight 5 kg Max tool diameter 70 mm Max tool length 240 mm Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Additional Equipment Measuring Probe RWP20.00 Enclosed Work Area Enclosure according to UW Some SK40 Chucks Hydraulic/Pneumatic Clamping Option in the Machining Area Römheld 8400-185 Hydraulic Unit, Max. Pressure 500 bar Flushing Gun in the Machining Area Replacement Milling Spindle Available This 4-axis Unisign Univers 4 was manufactured in 2004, featuring X-travel of 1600mm, Y-travel and Z-travel of 400mm each, and a spindle speed up to 9000 rpm. It includes a chain tool magazine with 44 positions and a tool holder type DIN 69871-SK40. The machine weighs 9000 kg and requires a space of 6.5 x 3.5m. If you are looking to get high-quality milling capabilities consider the Unisign Univers 4 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotatable Telehandler Mast Type: Telescopic Technical Condition: New Front Tires Type: Pneumatic Dedpfxjw Eqdwe Ab Tjla Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Description: The vehicle is UVV-tested. A&M pallet fork carrier set includes 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd valve, 4th valve, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, PEGASUS 60.30 St.V TÜV/Dekra approval, 20 km/h axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED headlights on the rigid boom, 7-pin socket on the upper carriage, car radio pre-installation kit with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated front-wheel drive and electrical pre-installation for 3-motion equipment, wheel set with 18R22.5XF MICHELIN off-road tires, semi-automatic air conditioning, removable windshield protection for the cab, kit for driving with 180° upper carriage rotation, boom vibration damping, integrated rear view camera with 7-display (not compatible with 7-monitor with digital camera on the telescopic boom). Telematics kit (DTS) Road lights (front) with LED daytime running lights Cabin with laminated glass windscreen, pre-installation for saw Woodcracker Three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg Pallet fork carrier plate including load hook A&M, width 1, chain forks FEM4A, tines: 150x50, length 1.2 m, load capacity

Condition: excellent (used), I will sell a set of hydraulic rescue tools Lukas. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Dlodpfx Aev Dx Ayjb Tja - Price given for 1 complete set.

Year of construction: 2017, condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Dedpfxex Dig Sj Ab Tjla - Machine available from: 2025-12-12 - Details: - └ Description: Machine is not working, needs new Stabilizer doppel, Schienenkopf, oil pump, chain and protective cover. - Year: 2017 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 7.5 - Max. workpiece length [mm]: 7000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2015, condition: excellent (used), Electric chain hoist Fabr.ABUS Type:GM 4 500.6-2 Year.2015 Load capacity.500 KG Lifting height 3 meter. Djdpfxoiunb Rj Ab Tela In good condition.

Year of construction: 2009, operating hours: 36,000 h, condition: ready for operation (used), General Data Measurements width 1500 mm Measurements depth 4800 mm Measurements height 1900 mm Machine weight 2700 kg Additional Equipment Voltage: 400 V With automatic feed Residue bunker Coolant device Dedpfx Absx D Sf Do Tela Mitre cut Loading station, chain magazine with 20 compartments on the infeed side Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides Minimum quantity lubrication including 2x shelfs from Kasto This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Application Types Sawing

Year of construction: 2012, condition: like new (used), Wall-mounted slewing jib crane TRANSPORTEC Type:PW1,25-5,0 Year 2012 Dedpsrqwdpjfx Ab Tjla Load capacity: 125 KG Outreach: 5000 mm Complete with fastening elements, no chain hoist and test book. Otherwise in mint condition 2nd piece in stock Price per piece 1 250,-€ net

Condition: ready for operation (used), Year of construction: 1994, Main Drive Number of axis 5 Additional Equipment Tool Magazine: 60 SK40 positions with vertical chain and double gripper / Drilling Capacity in Steel: 25 mm / Tapping Capacity in Steel: M24 / Milling Capacity in Steel (SK 30): 150 cm³/min / Milling Capacity in Steel (SK 40): 180 cm³/min / Milling Capacity in Aluminum: 500 cm³/min Chip Conveyor: Scraper belt / Flushing Gun for Chip Flushing / Coolant/Air Blast Switching: External via M function / Infrared Measuring Probe: Heidenhain TS 649 DMG / 3D quickSET: Toolkit for checking and correction of kinematic accuracy This 5 axis STAMA MC 520 was manufactured in 1994. It features a robust vertical machining centre with a clamping area up to 3000 x 430 mm and a permissible table load of 1600 kp. Equipped with a high-speed spindle capable of 6000 rpm and optional 10000 rpm, it ensures efficient machining. The machine includes a 60-position SK40 tool magazine and a scraper belt chip conveyor. Contact us for more information about this machine. Dodpfex D Sqgsx Ab Tjla Application Types Milling

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Dsdpfx Ajwd Tgfob Tjla Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Year of construction: 2024, condition: ready for operation (used), This MIRECS EasyLift was manufactured in 2024. It features a stable base plate for secure anchoring, a Demag Chain Hoist DCBS with a balancer for precise load handling, and a load capacity of 150 KG. The vertical stroke reaches up to 1,500 mm with a total height of 3,000 mm. Ideal for stationary applications requiring robust and precise lifting solutions. Contact us for more information about this machine. Application Types Dedpfx Abjx D Rbds Tsla Other Automation Equipment

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Dedpfxsx D Ir Ts Ab Tjla Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 6110 mm Measurements depth 3380 mm Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Dodpfx Abjx D Hzys Tsla Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Tools Number of station 150 Max weight 25 kg Max tool diameter 140 mm Max tool length 450 mm Type of tool holder HSK 100 This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 21000 kg Control Unit Model 31i–Mod.A Brand FANUC Main Drive Number of spindles 1 Spindle speed range 600 Spindle motor power 30 Kw Tool taper ISO 50 Din 69871 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 48 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 48 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 48 m/min Tools Number of index 60 Media Chip conveyor Yes Dsdpfex D I Rvjx Ab Tela Additional Equipment 2 Pallets (dimensions 630 x 630 mm, indexing: 1°, change type: 180° rotary, weight allowed on the pallet: 1,200 kg) Renishaw predisposition Remote electronic handwheel The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details. Application Types Milling