Used Small Unicorn 3 for sale (33,985)

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. Iiedpfxsva Nq Hs Adrek MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable Iiodpoxxv Rmjfx Adrek 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Iisdpfx Adovyr R Nersk Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: ready for operation (used), A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible. Iodpsxxl Izsfx Adroik

Condition: excellent (used), Used boltless shelving units Upright type S3 Height: approx. 446 cm (can also be shortened) Depth: 50 cm Longitudinal beams type S1 Ijdoxxdkuopfx Adreik Length: 150 cm Double-section shelves: 90 cm + 60 cm Price applies to 11 uprights and 100 shelves, making 15m of racking Multiple sets available Delivery possible

Condition: reconditioned (used), functionality: fully functional, overall weight: 540 kg, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input current: 16 A, type of input current: three-phase, input frequency: 50 Hz, year of last overhaul: 2025, warranty duration: 6 months, Dough Divider and Rounding Machine Roll Press TOP Model Fortuna Automat Gr. 3+ Iodsw Hvygepfx Adroik with rounding deactivation Safety guard with protective corners Electric head cleaning to the rear Dividing head with NEW stainless steel knife Dough loading up to 2,400g depending on dough consistency Dough divider with 3 new rounding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Refurbished used machine with warranty and spare parts service Options: Pedestal or chassis Rounding plate Service package Delivery service Maintenance contract E-Box Training & commissioning We have a huge selection of dough dividers in stock!

Condition: new, - Capacity 1270 x 2.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical rolling option Iijdewfn E Eepfx Adrjk - Pivoting top roller - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2009, machine/vehicle number: 210186, fuel type: diesel, General information Mileage: 94.035 km Weights Empty weight: 3.300 kg Functional Lifting capacity: 200 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 1100 m Transport dimensions (LxWxH): 5.7x2x3.2 Additional information Please contact PFEIFER GROUP for more information Iiodpstr Nyksfx Adrek

Year of construction: 1995, condition: excellent (used), 2 units centrifugal pumps Sulzer MB 80-230/3 Flow rate: 79-89 m³/h Head: 240-230 m Iiodpfed Sybusx Adrjk Max. temperature: 130°C Seal: Mechanical seal with flush water connection Drive power: Siemens 90 kW Speed: 2980 rpm ! Price per unit !

Condition: used, Year of construction: 2017, operating hours: 14,441 h, functionality: fully functional, total height: 2,450 mm, total width: 1,850 mm, total length: 4,300 mm, Currently in stock. Available immediately. Iiedpfx Ajvb Hpvjdrok The system has been completely overhauled since January 22, 2025.

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 4,035 kg, maximum load weight: 3,455 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, construction height: 2,650 mm, Equipment: ABS, air conditioning, central locking, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, - Fuso 7C18 Canter Concrete Mixer 2m³ / 3- Water tank 200L – Current delivery time approx. 5-6 months, more information available on request! Isdpfx Adsxwdqfsrsik - More info and additional XXL images on our homepage: - For inquiries in English please call ... A/C, automatic climate control, VAT deductible, ABS, radio, trip computer, heated mirrors, electric front windows, electronic immobilizer, central locking with remote, trailer coupling, power steering, locking differential, cab: short-range, PTO, new vehicle, emission class: Euro 6, diesel, rear-wheel drive, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, main and emissions inspection will be renewed before sale, fine dust sticker: 4 - Green

Condition: reconditioned (used), functionality: fully functional, Dough divider and rounder machine Fortuna roll press, size 3 Semi-automatic, 30 divisions Dividing head newly overhauled Stainless steel blade NEW Dough input up to 2550g Robust technology Capacity max. 7000 pcs/h Connection: 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Refurbished used machine Option: Stainless steel platform New rounding plate Service package Iodpfsw Hn Ivox Adroik Maintenance contract Training & commissioning Delivery service Are you already familiar with our exclusive service?

Condition: used, mileage: 58,710 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,520 mm, first registration: 12/2021, loading space length: 35,400 mm, loading space width: 20,520 mm, loading space volume: 12 m³, color: grey, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, navigation system, = Additional Options and Equipment = Iiodpfxev Dwvfs Adrok - Air conditioning - LED daytime running lights - Radio with DAB+ - Reversing camera - AdBlue system - Alarm system class I - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Remote central locking - Dealer-maintained - Height-adjustable driver's seat - Centre armrest - Radio - Start/stop system - Immobilizer - Bluetooth telephone - Partition wall = Further Information = General Information Number of doors: 2 Model range: 2020 - 2023 Technical Information Torque: 430 Nm Number of cylinders: 4 Engine displacement: 2,998 cc AdBlue system: Yes Transmission: 8-speed automatic Dimensions and Weights gross vehicle weight (GVW): 3,500 kg Maximum trailer load: 3,500 kg (unbraked 750 kg) Length/height: L3H2 Dimensions (L x W x H): 6087 x 2052 x 2660 mm Environment Emission class: Euro 6d-TEMP Maintenance, History and Condition Booklets: Available (dealer-maintained) Number of keys: 2 (1 remote control)

Condition: new, maximum load weight: 48,180 kg, overall weight: 70,700 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Full equipment list available on request. GOOSENECK * Gooseneck with integrated single-axle chassis (pendle axle) in removable design * Gooseneck hydraulically height-adjustable, including hydraulic connection linked to the hydraulic axle compensation for the front axles * Length: approx. 5,200 mm, with front taper approx. 60° * Suitable for tractors: 6 x 4 or 8 x 4 * Plug-in steel front wall, approx. 400 mm high, in angled design * 1 pair of mechanical support legs at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminium side boards, approx. 400 mm high, anodized finish * 1 plug-in aluminium rear board, approx. 400 mm high, anodized finish * Checker plate covering above the gooseneck * 3.5-inch kingpin * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 INOX tool box with single lid, bolted to the right side of gooseneck in the direction of travel, by the ALU sideboard, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling * 1 LED work light each on the left and right on the rear cross member of the gooseneck, wired to the connection bar for the tractor unit LOAD DECK * Low-bed with external beams, designed as telescopic load deck in low-profile construction with front extension, including fixed approx. 50 mm hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking point approx. every 1,000 mm on the extension * Fixed drive-on ramps at the front of the loading platform with climbing strips * 1 lashing ring on the outside of the fixed drive-on ramp (LC 10,000 daN) * 1 lashing ring suspended on the outside on each left and right at the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the inside beams of the low-bed * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the outside beams of the low-bed (LC 10,000 daN) * Recesses above lashing rings in the upper flange of the outside beams * Mechanical pin-lug coupling from the low-bed to the chassis to change the load deck or install extension beams, with electro-pneumatic-hydraulic couplings * The outside beams of the low-bed with a painted-on sand layer for anti-slip protection * 4 pairs of recessed lashing rings lying in the load deck, distributed along the outer frame/outside beam (LC 10,000 daN) * 1 lashing ring outside each on the left and right on the rear cross member (LC 10,000 daN) Iedpfx Aowx Ddwodrjik * Fold-out deck wideners, approx. 230 mm per side * Loose widening planks, steel-edged * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outside beam, for mounting bolted rings M24 (LC 8,000 daN) * 2 pairs of M24 bolted rings (LC 8,000 daN) included REAR CHASSIS * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear PENDLE AXLE * All axles hydro-mechanically forced steering * Burst hose valve on the axle compensation cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-fittings to secure in raised position * Final painting of axles with 2 layers of 2-component paint, solid color in DB 7350 Novagrau * Hydraulic axle compensation * Tires 245/70 R 17.5 3PMSF * Suspension bar

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 143 kg, fuel type: diesel, tank capacity: 12 l, color: black, output current: 12 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 6.8 kW (9.25 HP), continuous power: 6.2 kW (8.43 HP), total length: 730 mm, total width: 500 mm, total height: 620 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with 6,8kW. Three-phase generator Proton 3 with very low combustion. An added convenience is remote control with remote control. In short, a reliable engine, copper alternator and plugs. Model, with us since the beginning of the company. Generator perfect for construction sites. ABBREVIATION: Iodpfjtrmc Rsx Adroik Genset type: Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 400V Rated power: 400V - 6200 watts (7.7kVA) Maximum power up to 15 minutes - 6800W (8.5kVA) WEIGHT: Gross weight: 143kg FUELING: 1.0 liters per hour (at 70% of maximum power) 1.2 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 188FA-D Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 456 cc3 (88x75) Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.6l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 180-CAVR-400 Rated current (400V) - 12.3 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 84dB (measurement - 5m, open space) Fuel tank capacity - 12 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 3 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 50 cm Length - 73 cm Height - 62 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric, Manual (from a cord) Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: good (used), first registration: 03/2011, Year of construction: 2011, Empty weight: 34,500 kg Body brand: GOLDHOFER STHP/XLE 8 (3+5) LOWLOADER Ijdpfx Adovfnyqeroik Extendable body: Yes Technical condition: good Optical condition: good

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 4,035 kg, maximum load weight: 3,455 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, construction height: 2,650 mm, Equipment: ABS, air conditioning, central locking, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, - Fuso 7C18 Canter Concrete Mixer 2m/3 - 200L Water Tank - Current delivery time approx. 5-6 months, more information available on request! Iisdpfx Ajxwdqljdrjk - More info and additional XXL images on our homepage: - For inquiries in English please call ... Air conditioning, automatic climate control, VAT refundable, ABS, radio, on-board computer, heated mirrors, electric front windows, electronic immobilizer, central locking with remote control, trailer coupling, power steering, differential lock, cab: short-distance distribution, PTO, tipping hydraulics, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, consumption: 0.0/0.0/0.0 l/100 km (combined/city/highway), particulate filter, TÜV & emissions inspection will be renewed before sale, fine dust sticker: 4 - green

Condition: excellent (used), functionality: fully functional, Dough Divider and Rounder Fortuna Bun Divider-Rounder Gr. 3 Semi-automatic, 30 divisions For optimum results! Powerful and robust technology Connection: 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Used machine, cleaned Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Stainless steel platform New rounding plate Service package Maintenance contract Commissioning & training Delivery service Iijdpfx Aew Tthmedrjk Visit our bakery machines showroom!

Condition: used, Year of construction: 2006, functionality: fully functional, Bitzer chiller with control cabinet. Specification: Iiedpew N Rhcjfx Adrjk Flow rate: 315 m3/h Permissible operating pressure: 17 bar Medium: R134A The Bitzer KWR W250 KS chiller delivers stable cooling performance for industrial applications. Featuring a robust design, efficient refrigeration, and flexible integration options, the system can be easily incorporated into existing plants. Ideally suited for process, machinery, and building cooling in industrial environments.

Condition: reconditioned (used), functionality: fully functional, Dough Divider and Rounder Fortuna Bun Divider Rounder, size 3 Semi-automatic, 30-piece Dividing head NEWLY overhauled Stainless steel knives NEW Dough capacity up to 2550 g Connection: 400V, 16A CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Refurbished used machine with warranty and spare parts service Options: Stainless steel platform New rounding plate Isdpfx Aew Hn H Eodreik Service package Maintenance contract Instruction & commissioning Delivery service Try our exclusive service for you!

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 12500094 0004, Temperature control device for plastic injection molding applications and industrial applications up to 300 °C. Technical specifications: Voltage: 400 V Power: 45.6 kW Circuit diagram No. 40014 Current: 71 A Volume: 24 liters Flow temperature: 300 °C Frequency: 50 Hz Dimensions: 140x60x135 cm Total weight: 60 kg The Regloplas temperature control device model 300LD/20/FM65/1K/RT50 is a state-of-the-art solution for precise temperature control in industrial applications. With a temperature range of up to 50 °C, this device enables reliable and efficient control of process heat. It is ideal for tempering tools, molds and machines to improve product quality and shorten production times. The user-friendly control system makes it easy to operate and adjust settings, while the robust design guarantees durability and reliability. Ijdpfxovcp Uke Adreik Thanks to its compact design, the device can be easily integrated into existing production environments.

Condition: used, functionality: fully functional, machine/vehicle number: 543235, Temperature control device for plastic injection molding applications and industrial applications up to 300 °C. Technical specifications: Voltage: 400 V Power: 13.5 kW Circuit diagram No. 07007 Current: 21 A Volume: 9 liters Flow temperature: 160 °C Frequency: 50 Hz Dimensions: 99x40x112 cm Iiedpfx Adevc A Rfjrjk Total weight: 165 kg The Regloplas temperature control device model 300/12/FM30/1K/RT45 is a powerful and compact solution for precise temperature control in industrial applications. With a high heating and cooling capacity, this device ensures precise temperature control, which makes a decisive contribution to quality assurance in production. The user-friendly control system enables easy handling and adaptation to various process requirements. Thanks to its robust design, the P300/12 is ideal for use in demanding environments. The efficient use of energy and fast response time make it an indispensable tool for companies that value efficiency and reliability.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18269, overall weight: 350 kg, Temperature control unit by Robamat Technical data: Voltage: 400V Frequency: 50 Hz Current: 63A Max. temperature: 320°C Robamat 4212 temperature control unit. Ideal for precise temperature regulation in industrial processes and machinery control systems. This proven device supports demanding temperature management in production environments and delivers reliable performance under moderate operating conditions. The system comes complete with the relevant documentation and, where available, an operating manual. Iedpow U A Tuefx Adroik

Condition: good (used), functionality: fully functional, machine/vehicle number: I-106220, overall weight: 1,055 kg, The Expert-Tünkers rotary table ED 920/1505/3 is a reliable and precise solution for automatic rotary motion in industrial applications. With its robust construction and thoughtful design, it enables stable and accurate control of rotation processes, making it ideal for use in demanding manufacturing environments. The rotary table impresses with its easy integration into existing systems, low-maintenance design, and high performance. Iisdpfx Adswrrx Aerjk

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2600-109101 / Schaltschrank: 6700-101707, overall weight: 550 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 M2004, input voltage: 400 V, input current: 20 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, Iedpfxeucx Hde Adrsik IRB 2600-12 / 1.85 Year of construction 09.2017. Axes: 6, Payload: 12 kg. Total weight: 550 kg (400 kg robot arm + 150 kg control cabinet). Control cabinet: ABB IRC5 M2004. Year of construction: 11.2014 Used, complete, very good condition, tested and can be demonstrated. (See type plates for further details). We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.