Used Slot Machines for sale (64,560)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x950x1260 mm Weight 250 kg Hfsdpsvz Hkgsfx Ag Dsr Total power requirement 3,5 kw

Condition: used, Lot of 5 units WIG welding machines ESS model Thyrotig - Thyroplasmma 250 (DC) WIG welding machines in need of repair Year of manufacture: 1991 to 1994 Output: 250 Amp. = 60% duty cycle, 195 Amp. = 100% duty cycle Current type: DC Mains connection: 400 Volt, 50 Hz, 32 Amp plug - High-voltage ignition - 2-stroke and 4-stroke operation modes - Water-cooled - Some parts missing - Delivered without torch sets/hoses, scope of delivery as pictured Space requirements (L x W x H): 1200 x 570 x 920 mm Weight per welding machine: 255 kg Total weight for all 5 machines: 1,275 kg Hedpew Hhbiofx Ag Dsfr Three machines are operational. Two were kept in storage as parts donors. The units are no longer tested and are being sold as in need of repair.

Condition: used, Dowel hole drilling device: no Hodpfjw H Ip Tsx Ag Dsfr Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Machine length: 1280 mm Machine width: 960 mm Weight: 200 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Hfjdpjx Hx Ndsfx Ag Dor Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Max. machinable height: 120 mm Gluing System: EVA Hotmelt Hjdpsu Evi Refx Ag Defr

Condition: used, Year of construction: 2004, Drill chuck: Two-jaw chuck; Speeds: 2800 rpm; Drilling stroke: 200 mm; Max. drilling depth: 150 mm; Operation: Single-handed; Height adjustment: manual; Clamping cylinder: 1 pc; Clamping cylinder activation: Hand-operated eccentric; Version: movable drill head; Drill head tiltable: Yes; Table width: 630 mm; Table depth: 285 mm; Weight approx.: 240 kg; Motor power: 2.2 kW; Extraction diameter: 80 mm Location: Customer Hodpfxexbiu Rs Ag Defr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1470x810x1120 mm Weight 250 kg Total power requirement 3 kw Hfedpfjvz Hhlox Ag Der

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) Hfodpfx Ajx Eb Abeg Dsr - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: used, Year of construction: 2005, devel device: Teilung 16, 22 25, 32 boring depht: 145 mm boring length: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 1500 / 3000 U/min Hfjdpfxjw Dd N Ro Ag Der hold down: manuell suction connection: 100 mm machine length: 1280 mm machine width: 960 mm weight: 300 kg

Condition: used, Year of construction: 2010, total length: 1,300 mm, total height: 1,700 mm, total width: 800 mm, Empty weight: 500 kg Price: On request - Year: 2010 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 095 - Control type: Siemens - Control: CNC - Motor power: 4.0kW - Table width: 830mm - Table length: 1250mm - Model: Hydraulic - Max. stroke: 300mm - Power: 30.0ton - Transport dimensions: 1300mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hfodpfsx D Tfxox Ag Dsr

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Hjdpeu Eviqofx Ag Dsfr Gluing System: EVA Hotmelt

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Hfsdpfx Agewd U U De Der Location:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x2900x850 mm Hfsdpfx Ajvz E S Aeg Dor Weight 650 kg Total power requirement 3 kw

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture: 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Hfodpfx Aewc Svpog Dor Not tiltable

Condition: used, Year of construction: 1988, dowel hole drill device: division 16, 22 25, 32 Hsdpsqx Ig Ajfx Ag Defr max depth of the slot: 145 mm max length of the slot: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 2800 U/min suction connection: 100 mm machine length: 1280 mm machine width: 960 mm weight: 300 kg

Condition: used, Year of construction: 2025, New display machine! Including 3-axis control Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment General features of the P 450: Sliding table made of anodized aluminum, including high-precision guide rail made from hardened and ground steel Sliding table can be locked in any position Saw blade guard with swivel-away function Extension arm with adjustable mitre stop and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrics and safety devices according to CE standards Technical data: Hfedpfowvcf Uex Ag Djr Saw blade tilting: 0° to 45° Table dimensions: 1,030 x 680 mm Sliding table dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP 2 extraction ports Mitre stop extendable to 3,600 mm Location:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Total power requirement 2,2 kw Hjdpsvz E Sijfx Ag Defr

Condition: used, Year of construction: 1983, Dowel hole drilling unit: pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 1400/2800 rpm Hold-down: manual Hjdpfx Agox Edmie Dsfr Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 2012, Saw unit: tiltable 45° Carriage length: 2000 mm Max. saw blade diameter: 400 mm Max. saw blade projection at 90°: 125 mm Max. saw blade projection at 45°: 87 mm Saw blade bore: 30 mm Motor power: 5.5 kW Max. cutting width: 1000 mm Control panel: located on the lower machine housing Control panel version: with buttons and digital display Height adjustment: electric motor Tilting adjustment: electric motor Tilting angle display: digital Cutting width adjustment: manual with fine adjustment Cutting width display: digital Sliding table guide: steel Table extension length: 840 mm Cross-cutting at cross fence: 3200 mm Cross fence display: scale Hfodpfx Agsx Hwqyo Dsr Cross fence version: fixed at 90° Speeds: 3/4/5000 rpm Scoring unit: yes Scoring unit adjustment: motorized and manual Scoring blade: Rapido system PSV guard: yes End position interlock: yes Automatic motor brake: yes Working height or feed table height: 910 mm Weight approx.: 1100 kg Extraction diameter: 120/80 mm Description: 120/80 Storage location:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Hfodsvz E Rxepfx Ag Djr Weight 650 kg Total power requirement 3 kw

Condition: used, Year of construction: 1996, Dowel hole boring unit: pitch 16, 22, 25, 32 mm Drilling depth: 145 mm Slot length: 240 mm Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 1400/2800 rpm Hold-down device: pneumatic Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Hjdsx Edmcepfx Ag Dsfr Weight: 300 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Hfodjvz E Rrspfx Ag Dsr Weight 650 kg Total power requirement 2,2 kw

Condition: used, Year of construction: 2004, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Hedpfx Agjx Edlrj Dofr Crosscut scale display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2540x2900x850 mm Weight 1200 kg Hodsvz E Ikepfx Ag Dofr Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x2900x850 mm Hfodevz E Ecepfx Ag Dsr Weight 1280 kg Total power requirement 5,5 kw