2-head sachet machine with four-side seal

SN Packaging Machines FM1

Year of construction: 2025, condition: new, Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 5000kg/h. - Specification of the lifting crane: max. weight per bag: 1T; max. bulk bag size: L1200xW1200xH1700mm; machine dimensions without side crane: L1740xW1740xH5400mm; - Specification of the vacuum pump: Capacity: max. 5000kg/h; power: 380V, 5.5kW; hopper diameter: 650mm; discharge diameter: 420mm; height of vacuum pump: 1800mm. Gbedpfev Nk Dajx Anmjr That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Godpfx Anjxu Uvajmobr Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of the moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Daylight opening (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed Standard / Option: 1/min 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 3826ä

Condition: used, TECHNICAL DATA Labelling machine for self-adhesive labels with 2 stations Front, back or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 600 KG Dimensions: 2800(L) x 1300(B) x 2400(H) mm Etimax Website:   YouTube Video:   Gbedpfxoxytyzj Anmsr EQUIPMENT: TouchScreen SIEMENS Control SIEMENS Inverter SIEMENS Station 1 front label Station 2 back label/wrap-around (roll-on) label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products

Year of construction: 2022, condition: new, Brand new, 4 color precision pad printer with 3 year warranty! Specifications: Gbodpfjn Ry R Eox Anmjr Electrical: 230V/ 50Hz/ 10A Controller Voltage: 24 DC Air pressure: 6 bar Air volume: 600 Nl/min Weight: 280 kg !!! Full customization available. We have three units in stock !!! Please check out our other listings as well.

Condition: new, Year of construction: 2024, Pad Printing Machine TIC PRL2C254 Gjdpfx Ajhmpm Njnmobr 2-colour-machine, stand model, electro pneumatic control, closed ink system, ink cup ø: 90mm, cliché size: 2x100x250mm, incl. enlarged carré table with 10stations, the table is height-adjustable via spindle, pick-and-place station, enlarged pedestal, pad cleaning station with infinitely adjustable belt conveyor, corona generator with 1electrode (60mm), extraction unit with adjustable fan to suction the ozone at the corona device and to suction the solvents fumes at the ink cups, pad blowing system with adjustable jointed hoses, pad pressure: 168kg when 6bar. - Option: micro fine adjustement for printing of empossed printing objects, feeding station, suitable drying system, flaming station, optical registration. Sturdy housing made of aluminium cast, electro-pneumatic control, clear touchscreen display with modern microprocessor control, optional signal outputs for connection of peripherals. Stand models with sturdy torsion-resistant support out of steel plate with an extended downward adjustment of the feeding table to positioning of higher objects. European/Japanese pneumatic elements, low running by air sound absorbers, print parameter adjustable via display, closed ink system with register pins for magnetic fastening, ink cups with ceramic doctor ring, contact pressure adjustable via magnetic adjustment. All machines equipped with safety plates at the sides as well as emergency switch and foot switch. Needed connection: compressed air 6bar, 230V, 50cycles. Delivery time 14-16 weeks

Year of construction: 1979, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 123, We are selling a Bosch Höller 3 edge-sealing machine that underwent a general overhaul in 2022. The machine has been fully converted to servo drive and fitted with an S7 control system. Coloured or clear film is fed via a roller, folded into a bag measuring 11 cm wide by 15 cm high, and sealed. The grippers can be individually adjusted within the frame as required. Product feeding is via a screw feeder, which also operates fully electrically with all standard parameters. The machine is fully operational. Depending on the product to be filled, speeds of 40–60 bags per minute can be achieved. Gbodpoizag Tjfx Anmsr

Condition: good (used), Year of construction: 2011, Site price: Carton erector, Mohrbach, erector 541 - second-hand - : Price per unit ex site: only 19.950.-€ (net), incl. loading! Manufacturer: Mohrbach Type: Erector 541 Year of construction: 2011 Machine number: 1112030 Gbsdpfouxq N Eox Anmor with Nordson ProBlue 4 adhesive melter 4 liter hot melt adhesive Machine dimensions: approx. length: approx. 2.06m plus c. 1.36m for the magazine Condition: good Available: immediately Location: CZ Bor

Condition: used, Labeling machine with printer, condition unknown, display works when connected to power. Gbjdpfswydp Nsx Anmjr

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,193 h, functionality: fully functional, machine/vehicle number: 8616, drive type: Omron, number of previous owners: 1, input voltage: 400 V, input frequency: 50 Hz, number of print heads: 1, air pressure: 6 bar, control voltage: 24 V, nominal power: 8.1 kW (11.01 HP), sieve area: 260,000 mm², sieve perforation: 7 mm, space requirement height: 3,500 mm, space requirement length: 6,000 mm, space requirement width: 4,000 mm, control type: PLC-controlled, number of digital displays: 1, production capacity: 14,500 unit/h, Equipment: CE marking, emergency stop, type plate available, Fully functional 6-head stickpack machine equipped with a glue-applied hook applicator, with a capacity of 14,500 units/hour. The machine has seen little use and is in excellent condition. It is being sold due to the standardization of the machine park to another brand. The machine includes, among other things: * Automatic film tensioning and film alignment system; * Videojet inkjet printer, Meler hot melt unit, dust extraction system; * Omron control system, touchscreen HMI, and servo motors, Festo pneumatics; * Hot melt adhesive application for the suspension hook (can also function without hook application); * Integrated punching function for a 1.5 mm opening in the stickpack (can be disabled); * Automatic box selector with a reject system; * Vibrating screen, infeed conveyor, hopper, and adjustable volumetric dosing system. * Includes some various spare parts and a complete digital English-language manual with technical drawings. * Dimensions of the finished product without hook application: 95 (length is adjustable) x 35 mm, with a usable internal volume of approximately 10-13 ml. The machine has always been well-maintained. Annual maintenance has been consistently performed. The machine can be demonstrated in working order. Includes some spare parts and a digital manual. Gbjdpfx Aezgwh Nsnmjr Terms of sale: The machine is sold EXW (Incoterms® 2020) at the seller's location. Disassembly, internal transport, loading, transport, unloading, and re-installation are entirely at the buyer's expense, risk, and responsibility. Technical support during disassembly and internal transport can be provided, but it is strictly advisory and does not imply any liability on the part of the seller. Additional information or a demonstration can be provided upon request.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 100281518, total height: 2,260 mm, total width: 1,550 mm, total length: 1,685 mm, product height (max.): 310 mm, product width (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min Gbjdpfx Anoy Ath Hemjr MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system