Used Slide Sanding for sale (9,631)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Scope of delivery: - Table extension - Rubber rollers With veneer edge sanding device with contact shoe With fine adjustment and fence rulers Hsdpfx Afew I Up Ujisnu With grooved infeed fence for veneer overhangs Quick switch between veneer edge and solid wood sanding possible Approximate dimensions: Length (product): 1900 mm Width/Depth (product): 900 mm Height (product): 1350 mm Net weight: approx. 290 kg Oscillation motor power: 0.25 kW Extraction port diameter: 140 / 100 mm Height adjustment of longitudinal table: 230 mm Min. cross table height: 720 mm Working table length: 960 mm Working table width: 350 mm Working table height adjustment: 230 mm Connection voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt running speed(s): 20 m/s Oscillation stroke: 20 mm Sanding surface length: 1050 mm Sanding surface width: 200 mm Includes: 1 pack sanding belts K 80 1 pack sanding belts K 120 Availability: short-term Location: Hochheim

Condition: good (used), Radii from 2 mm to 12.5 mm. Expandable up to 25 mm. 45° bevels up to 16 mm wide. Workpiece support extendable up to 380 mm. Optional feed system available. You will receive an invoice with VAT shown separately. Price applies ex stock Haldensleben. Hsdpfx Asw Sw Syofienu

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Hnodpei Huzxjfx Afiju Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: excellent (used), Year of construction: 1999, I sell the widebelt sanding machine VIET CHALLENGE 211B 1100, year 1999. Configuration: Steel cylinder Hard rubber cylinder Working width 1100mm Hnedpfx Afjt N Eyfjieu Pressure rollers for short elements. Air blow cleaning on both units Total weight 2240kg 1 motor Condition very good ! Available immediately.

Year of construction: 2004, condition: ready for operation (used), A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible. Hnsdpfxjt Amc Ue Afisu

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm Hedpfx Afjknyhloisnu machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Hsdpfx Asw I Uvzsfienu Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Condition: used, Year of construction: 1970, 150 mm 500 mm weight of the machine ca. 0,75 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hsdogvi I Hopfx Afisnu Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Hnsdsgf Ix Aopfx Afiju Almost identical linear unit under stock number 59702

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Configuration: 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Hnsdpfoihfawjx Afieu Air-blow on all units. Total weight 2750kg 3 motors 18,5 + 15 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Year of construction: 2018, condition: ready for operation (used), A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible. Hnedpfx Afsv Np U Deiju

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically Hsdpfxsirmg Us Afienu workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Hnsdpfew I Uqxox Afisu The top section is made of heavy cast construction, equipped with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm. The machine is fitted with an integrated switch-plug combination, motor protection switch, and main switch according to VDE standards. Dimensions of the sanding belt backing plate: 850 x 150 mm. Steel table height adjustable by spring pressure. Belt size: 150 x 2280 mm. The sanding belt backing plate is covered with a graphite slip lining. The machine is supplied with an assortment of sanding belts. Also included in the scope of delivery are a mitre gauge and an angle stop. When connected to a central extraction unit with an air velocity of at least 20 m/s, the machine is dust-certified (GS) by Holz-BG Stuttgart. Standard equipment: - Swivels 90-180° - Motorized belt oscillation - Small support table at the deflection roller - Pneumatic belt tensioning Technical data: Motor power: 2.2 kW Sanding belt size: 150 x 2280 mm Sanding belt speed: 22 m/sec Table size: 750 x 350 mm Required space: 1000 x 800 mm Weight: from 180 kg Extraction connection Ø: 100 & 80 mm Availability: short-term Location: Solingen

Condition: used, Year of construction: 2015, 8 Spindle System Hedpfow A I Alox Afienu Connection: 380/400V/50Hz/16,73 kW Glass thickness: 3-25mm Total length: 6572 mm Inlet length: approx. 2021 mm Outlet length: approx. 2021 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 4,889 h, functionality: fully functional, CNC PROFILE GRINDING MACHINE REFORM ZSM 400 GS Year of manufacture: 2017 Control system: Siemens 840-Dsl Also suitable for grinding broaching tools Technical data: Thread diameter: 20 - 80 mm Grinding length: 3500 mm Thread length min./max.: 50/3500 mm Center height: 400 mm Hedpsw Dpdtsfx Afienu Workpiece length: max. 4000 mm Bore diameter: 203.2 mm Control: Siemens 840-Dsl Feed rate U axis: 0 - 2500 mm/min Feed rate W axis: 0 - 2500 mm/min Feed rate B axis: 100 1/min Total connected load: 45 kW Distance between centers up to max. 4000 mm Adjustable cutting speeds between 20 and 75 m/s Machine weight approx. 24 t

Year of construction: 2008, condition: excellent (used), I sell the widebelt sanding machine SGJ 1300R-RP. Year 2008 Configuration: steel cylinder / motor 37 KW combi unit rubber cylinder + pad / motor 22 KW Cleaning unit with dust extraction Feeding speed adjustable with variator Pressure pads for short elements on each unit. Infeed and outfeed table for long elements. Working height 3-150mm Working width 1300mm Total power 64 KW Total weight 4000kg Condition very good ! Hnedpfekd Am Esx Afisu Available immediately.

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg Hnjdpfx Ajiuld Dsfiou

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Hjdpfxjgtdpue Afisnu Table size: 960mm x 352mm Additional table: 330mm x 330mm grinding roll diameter: 60mm / 100mm / 120mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg

Condition: new, Year of construction: 2022, Belt width: 150mm Strap length: 2260mm Veneer sanding device: no Oscillation: yes Hjdpfjha Nz Rjx Afienu Roller diameter: 115 mm Sanding unit swivels: yes / 90° - 0° Work table: 750 x 250 mm Additional table: 300 x 245 mm Belt speed: 16.3 m/sec. Suction connection: 100mm Motor power: 3 kW / 400V Machine length: 1270mm Machine width: 600mm weight: 120kg

Condition: new, Year of construction: 2022, Strip width: 150mm Belt length: 2740mm veneer sanding device: no oscillation: yes roller diameter: 115 mm Grinding unit swivels: yes / 90° - 0° worktable: 900 x 305 mm additional table: 290 x 260 mm Belt speed : 16 m/sec. m/sec. Suction connection : 100mm Motor power : 3 kW / 400V Machine length: 1540 mm Machine width: 750 mm Hjdpjhq A H Djfx Afisnu Weight: 220 kg

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 2270mm veneer sanding device: no Oscillation: yes roller diameter: 38mm, 50mm, 76mm Sanding unit swivels: yes / 90° - 0° working table: 680mm x 310 mm additional table: 260 x 260 mm Belt speed : 16 m/sec. m/sec. Suction connection : 100mm x 2 Motor power: 1,5 kW / 400V Hedpsgulrxefx Afionu Machine length: 1350 mm Machine width: 585 mm Weight: 162 kg

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 3000mm Table size: 960mm x 350mm Hnsdpfshflw Ssx Afiou Additional table: 330mm x 330mm Veneer sanding device: yes Oscillation: yes Sanding unit swivels: yes Suction connection: 120mm Motor power: 3 kW Machine length: 1910mm Machine width: 840mm weight: 330kg

Condition: as good as new (ex-display), Year of construction: 2022, Strip width: 150mm Belt length: 2400mm veneer sanding device: no oscillation: yes roller diameter: mm grinding unit swiveling: yes / 90° - 0° Work table: 730 x 300 mm additional table: 420 x 400 mm Belt speed : 14 m/sec. m/sec. Suction connection : 120mm Hnodpfohpmadox Afieu Motor power : 1,8 kW / 400V Machine length: 1480 mm Machine width: 680 mm Weight: 160 kg

Condition: as good as new (ex-display), Year of construction: 2022, Strip width: 150mm Belt length: 2170mm Table size: 1440mm x 710mm veneer sanding device: yes oscillation: yes Table tilting: yes, 0°÷ 45° Hnodehpmahopfx Afiou Suction connection: 120mm Motor power: 3 kW Machine length: 1440mm Machine width: 800mm Weight: 530kg

Condition: new, Year of construction: 2022, Bandwidth: 150mm Hsdpfxsgr Ufhs Afienu Belt length: 3000mm Table size: 960mm x 352mm Additional table: 330mm x 330mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 810mm Weight: 290kg