Used Slewing Ring for sale (42,281)

Condition: new, - Shaft diameter 30 mm - Rotates to the right and left - Emergency stop - Documentation Dsdpslzgwhjfx Ab Tewf - 230V

Condition: used, diameter 190 mm Dwodpfsvimwijx Ab Tof base jaws which are centrically adjustable top jaws which are individually adjustable   through-bore 50 mm hole circle 176 mm height 145 mm weight 14.5 kg  

Year of construction: 1987, condition: used, Gantry slewing single level-luffing jib crane constructed for 4-rope grab operation as well as hook operation Dodpfjdlazgox Ab Tswf Capacity grab operation approx. 8,0 to at an outreach of approx. 12,0 up to 25,0 m Capacity in hook operation max. approx. 12,5 t Lifting height above rails with jib approx. 25,0 m max. approx. 22,9 m Span original/actually approx. 6,0/5,2 m Make TAKRAF/TEICHMANN Year of construction/complete overhaul - modernisation 1987/2005 Total weight only approx. 90,0 t Crane equipped with under ridable full-portal, intermediate column to increase the boom pivot point, complete enhousing of the top crane, modernisation with completely new electrics (FU control), cabin, control chair, motor-cabledrum and new painting in 2005 Working speeds: Main hoisting gear actually/optimized approx. 52,0/65,0 m/min Retracting gear approx. 35,0 s Slewing gear approx. 1,2/2,4 rpm Crane travel gear max. approx. 50,0 m/min

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, overall weight: 7,000 kg, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Working width: 950 mm Working height: 0.5–120 mm MACHINE DETAILS Dwsdpfx Abox Ahm Is Tsf Control system: CNC Motor power: 39.0 kW Dimensions & Weight Dimensions (L x W x H): 3,940 mm × 1,980 mm × 2,010 mm Weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: used, Year of construction: 2000, centre height 280 mm centre distance 1200 mm turning diameter over bed 570 mm turning diameter over slide 365 mm turning length 1000 mm spindle taper DIN 55027 Gr. 8 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 62 mm turning speed range 3 - 2500 U/min feed: 5000 mm / min rapid travel - longitudinal/face 10 m/min 3-jaw-chuck diameter 250 mm quick change toolholder SANDVIK Coromant Capto drive capacity - spindle motor 25 kW taper in tailstock-quill MK 5 dia. of quill 100 mm quill stroke 190 mm voltage 400 V weight of the machine ca. 5,0 t dimensions of the machine ca. 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp Dwedpfxsx E Dn As Ab Tjf

Condition: excellent (used), Year of construction: 2004, We are offering an exceptionally high-quality precision lathe. Within its class, this is likely the best German lathe ever built. Dwedow Rdthspfx Ab Tef BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, including CE certification and central lubrication Machine No.: T1022.2027-00 Center height: 240 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 285 mm Center distance: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 Size 6 Spindle bore: 100 mm Drive power: 11 kW Maximum torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MK 5 Machine footprint (LxW): approx. 4,000 x 1,525 mm Weight: approx. 4,300 kg Accessories: - HEIDENHAIN 3-axis digital readout - Central lubrication system - Electrically interlocked chuck guard - Coolant system - Chip protection rear panel - Röhm chuck, T 250 mm, with various jaws - Telescopic cover for lead and feed screw, support to bed - Machine lamp - Multifix C + 4 quick-change tool holders - Live center - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and visual condition. Backlash on cross slide approx. 0.3 mm, on compound slide approx. 0.15 mm Spindle nose runout approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over approx. 750 mm bed length (measured on flat guideway towards chuck using dial indicator) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for operating lever replaced - Locking pin for interlock replaced Price is net, ex stock, loaded free of charge. Delivery by company truck can be arranged at extra cost.

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Bottom sanding - Material feed via rubber rollers - Contactless oscillation control - Quick-change pressure beam - Electromotive adjustment of tool thickness with easily readable digital display - Pushbutton with contactor control - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm Dwodpjwpm I Tsfx Ab Tsf - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Roller feed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Availability: short-term Storage location: 63934 Röllbach

Condition: used, For repair Wide Belt Surface Grinding Machine Sheet Metal Deburring Brush Machine, Deburring Machine with 4 Processing Stations Belt Grinding Unit and Brush Deburring System Manufacturer: BÜTFERING - STEELMASTER Model: Frima-V/413RRTT Machine No.: 76 931 Year of manufacture: 2002 2x Brush Deburring Units + 2x Belt Grinding Units Maximum working width: 1350 mm Conveyor belt width: 1370 mm (severely worn on one side) Processing thickness: 0.3 mm to 150 mm Belt Grinding Units Grinding belt width: 1350 mm Motor power of grinding belt (1): 11 kW (speed 2,930 rpm) Motor power of grinding belt (2): 12.5–16 kW (speed 1,470–2,950 rpm) - Grinding belt speed (belt 1) only in high speed setting - Grinding belt speed (belt 2) in 2 stages - Pneumatic belt tensioning Brush Deburring System with multiple vertical grinding discs and oscillation 2 roller brushes Ø 250 mm Roller width: 900 mm Brush rotational speed: approx. 1,440 rpm Motor power for deburring brush set (3): 7.6–9.5 kW Motor power for deburring brush set (4): 7.6–9.5 kW - Grinding disc speed (3) in 2 stages - Grinding disc speed (4) in 2 stages - Oscillating movement of the brush rollers via geared motors - 2 separate drive motors, each brush station driven independently Conveyor Belt Feed System Feed motor power: 0.75 kW Dodpow Ed Uvefx Ab Tjwf - Infinitely variable conveyor speed via frequency inverter - Motorized height adjustment for material thickness 0.3–150 mm Electrical connection: 400 Volt, 50 Hz, 55 kW Machine footprint: Length 300 x Width 270 x Height 210 cm Transport dimensions: Length 600 x Width 242 x Height 210 cm Weight: approx. 5.5 tons The machine was run in wet grinding mode, band filter unit installed in machine frame. Machine in poor condition, was decommissioned and stored under a tarp for approx. 5 months. Technically, most components appear intact, but improper storage has led to some rust formation. The electrical controls are operational. The machine requires refurbishment.

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW Dedpfx Abou Nit Rs Tewf weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: from Behringer HBP automatic band saw -Piston rod: Ø 22 mm -Stroke: 310 mm -Piston rod mounting: M12 -Dimensions: Ø 55 x 480 mm -Weight: 4.6 kg Dwjdpfogb Egbex Ab Tjf

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Djdpox D Rinsfx Ab Towf This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information. Application Types Honing

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 Dwedpfod Ewaajx Ab Tef with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 With accessories and equipment documentation.

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Spray head Design: vertical Remarks: Original drawing available; vessel was modified at the end of 1996 (test report available, no modification drawing); 1 welded bracket inside the vessel Speed: 705 rpm Outer diameter: 1,400 mm Inner diameter: 1,200 mm Total height: 2,450 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Top head: removable/hinged top Mechanical seal: mechanical seal with thermal siphon vessel Agitator: propeller Base type: feet Location: Bremen Technical documents: drawing, TÜV certificates Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 litres Double jacket volume: 192.0 litres Wall thickness cylinder: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 840 mm Last application: Pharmaceuticals VESSEL Dodpfxexqaqbs Ab Towf Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom head temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Head wall thickness: 8 mm Agitator arrangement: eccentric in the top head

Condition: good (used), Gehring Honing Machine E 630-45 - Honing diameter: 3 - 45 mm - Maximum honing length: 350 mm - Number of honing spindles: 1 - Stroke length: 2 - 630 mm - Stroke drive: electric - Stroke speed: 1 - 40 m/min - Infinitely variable stroke control - Spindle speed: 150 - 6000 rpm Good condition, fully functional, can be inspected and tested under power on site. Worldwide shipping available. Inspection: Djdpfjx Emyujx Ab Tjwf In order to avoid misunderstandings, I would like to point out that the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid uncertainties. For general questions or to arrange a viewing appointment, I am available at the telephone number provided below or above at any time. Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Shipping via freight carrier.

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Dedpfxou Nimqs Ab Tewf Coolant system with pump Operation via control panel / two-hand operation *

Condition: good (used), Reamer, twist drill, drill bit -Manufacturer: Holex, WMW, Gühring / Ilix, twist drills 37 pieces Ø 14.5 - 31.5 mm -Type: Two-cutter, holders MK1, MK2, MK3 -Size: 1x Ø 14.5 - 31.5 mm each, increasing by 0.5 mm -Price/Delivery: complete Dwedpfx Aow Hygwjb Tof -on request: different sizes/quantities available from further stock -Transport dimensions: 420/350/H170 mm -Weight: 16.3 kg

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), General Data Machine weight 3000 kg This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. Dsdpfsx D N Amsx Ab Tswf Application Types Sawing

Year of construction: 1996, condition: ready for operation (used), We have spare parts for CNC lathe VDF Boehringer cm180. Following parts. Turret head price:1500,-€ Tailstock price:1000,-€ Main headstock price:3000,-€ Dsdpfx Asgqurbeb Tswf ball screw X and Z axis price:1000,-€ axis motors X and Z price:3000,-€ Main spindle motor price:3250,-€ Hydraulic system price:1200,-€ Chuck 250mm with clamping system Price:1800,-€

Condition: used, tank capacity: 733 l, GENERAL Equipment: Spray head, crane lugs Design: upright Remarks: Feet with load cells (see photos) Speed: 720 rpm External diameter: 1,030 mm Internal diameter: 880 mm Total height: 1,950 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 150 °C Dwsdpsxqac Dofx Ab Tjf Max. permissible operating overpressure: 6.0 bar Maximum overpressure: 6.0 bar Top cover: removable/top cover can be opened Agitator: propeller Support type: feet Location: Bremen Technical documentation: drawing, various documents Jacketed cylinder: double jacket Nameplate: Vacuum: 1.0 bar Volume: 733 liters Double jacket volume: 55.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Jacketed bottom: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: available MATERIAL SPECIFICATION Temperation system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR 1 Voltage: 230/400 Volt Agitator installation: bottom-mounted

Condition: good (used), Year of construction: 2002, operating hours: 5,900 h, functionality: fully functional, machine/vehicle number: 74343, working width: 1,350 mm, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, Wide belt sander Bütfering Optimat SBC 313 Year of manufacture: 2002 Model: Optimat SBC 313/QCE/Classic - with 3 units (see attached photo for description) - sanding from above Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 2620 mm Dsdpjqvl D Hsfx Ab Tewf Cross belt width: 150 mm Cross belt length: 4700 mm For more detailed information, see the photos

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), General Data Measurements width 3100 mm Measurements depth 1850 mm Measurements height 2600 mm Djdpfex D H A Dsx Ab Tjwf Machine weight 2800 kg This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. Application Types Sawing

Year of construction: 2001, operating hours: 26,400 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 810 D powerline Additional Equipment Thread pitches: Metric threads (longitudinal, flat, and tapered) mm 0.1-400 This BOEHRINGER VDF DUS 560 ti was manufactured in 2001. A robust horizontal turning machine, it's ideal for training purposes. If you are looking to get high quality turning capabilities consider the BOEHRINGER VDF DUS 560 ti machine we have for sale. Contact us for more information. Application Types Turning Djdpfx Aox D E Dgeb Tjwf

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1150 kg Dedpjx D Iqpjfx Ab Tswf This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. Application Types Sawing

Condition: ready for operation (used), Year of construction: 2013, Main Drive Number of axis 3 Main Drive Dodpfsx D Rihox Ab Tswf Number of axis 3 This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information. Application Types Honing

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 3000 rpm This BOEHRINGER DUS400Ti was manufactured in 2003. A robust horizontal turning machine featuring a manual plus 4410 control, it boasts a turning diameter of 420mm and a distance between centers of 1200mm. Equipped with a Schunk Rota-S Ø250 chuck and a main spindle speed of 3000 rpm. Consider the opportunity to buy this BOEHRINGER DUS400Ti horizontal turning machine. Contact us for more information about this machine. Djdpfjx D N Ebex Ab Tswf Application Types Turning