Used Shrink Machine for sale (63,805)

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic flow pack machine for packaging products—regardless of their length—in a full wrap with no film overlap. Product feeding is carried out via a conveyor belt, which simultaneously folds the product into a centre-folded film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to different product widths. Longitudinal sealing is accomplished by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical Specifications - Cross sealing bar: 450 mm - Film: centre-folded film, approx. 12 - 80μm - Film roll outer diameter: max. 400 mm - Film roll width: max. 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Passage height: 200 mm - Working height: 780 – 930 mm - Power supply: 400 V three-phase current, 50 Hz with protective earth - Rated power: 3.5 kVA Njdpfsw U A Eqex Ad Nskt - Rated current: 5.1 A Tunnel passage width: 650 mm Tunnel passage height: 200 mm Viewing and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Nedpfxow E Igvs Ad Nokt Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: used, machine/vehicle number: 16011, automatische Folieneinschlagmaschine - Wrapping & Shrinking Machines CMC FA-600 BT Nkedpfx Aeh Axp Nsd Nst Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Nkjdpfeh Ax Hfex Ad Net Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Shrink tunnel SC4030S Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Shrink Tunnel Compact 650 D Year of construction: 2008 Dimensions: approx. 2600 x 1500 x 1400 mm (LxWxH) Weight: approx. 750 kg net / 830 kg gross Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 200 mm Length of heated tunnel hood: 1800 mm Working height: 800 - 900 mm Power supply: 400 V three-phase current Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in single-unit operation Njdpfxewmcuwo Ad Nskt Compact and economical shrink tunnel with the patented ring nozzle heating system and particularly effective air flow regulation. Equipped with a continuously adjustable plastic link belt. This tunnel is particularly suitable for shrinking small to medium-sized products. Viewings and demonstrations are available at our premises by appointment. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm Nkodpfxow Ddb To Ad Not - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Length 2995 mm Width 1250 mm Nkedpfxetrtztj Ad Njt Height 1550 mm

Condition: used, Year of construction: 2004, • Two solvent tanks – for continuous operation and efficient adhesive application • Perforation unit – integrated perforation system for custom tube formats • Built-in extraction and blower system – ensures clean working conditions and effective removal of fumes or particles • Tube diameter range: 20 – 300 mm • Maximum speed: up to 200 m/min Nksdpfx Aewynlhed Njt

Year of construction: 2002, condition: ready for operation (used), Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. Nkodpfeh Rykusx Ad Njt

Condition: like new (used), functionality: fully functional, machine/vehicle number: 190572, total length: 2,000 mm, total height: 1,650 mm, total width: 550 mm, type of input current: three-phase, product height (max.): 250 mm, product height (min.): 50 mm, product width (max.): 200 mm, input voltage: 400 V, power: 10 kW (13.60 HP), feed rate X-axis: 300 m/min, temperature: 175 °C, This is an unused shrink tunnel system with a corresponding conveyor belt. It was purchased a few years ago but never used. Its functionality is therefore fully guaranteed. For more information, please feel free to contact us. Nedsv Dixrjpfx Ad Nekt

Condition: new, Year of construction: 2024, functionality: fully functional, The REPLAY evo range offers basic products without sacrificing excellent quality. Equipped with advanced new and exclusive systems, it represents the most competitive solution of the new machines with bell from minipack®-torre. Nsdouakl Hopfx Ad Njkt REPLAY 55 evo combines technological performance with essential and compact shapes, without sacrificing the excellent quality that characterizes minipack®-torre machines. - Power supply V 200/230 - Phase ph 1 - Installed MAX power kW 3.15 - Production per hour p/h (pph): 0-300 - Sealing bar useful dimensions: 540x390 mm - MAX product dimensions: 500x380x200 mm - MAX coil dimensions (diameter): 250 mm - MAX film reel dimensions (width): 600 mm - Work table height: 940 mm - Machine dimensions with protective cover open: 1260x810x1400mm - Machine dimensions with closed protective cover: 1260x810x1190mm - Machine weight (net/gross): 105/126 kg

Condition: new, Year of construction: 2024, Shrink wrapping machines with simplified technology, advanced control logic and cycle management, designed to guarantee high application performances together with great user-friendliness and easy maintenance. Warranty: 12 months (single-shift operation), Technical specifications: Sealing area W x L: 420 x 550 mm Max. product height: 150 mm Mains voltage: 230 V - 1 Ph Power: 3 KW Dimension L x W: 1235 x 750 mm Nksdpfehtuu Aex Ad Net Height of work table with trolley: 920 mm

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2535, type of input current: three-phase, product height (max.): 150 mm, product length (max.): 450 mm, product width (max.): 280 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 16 A, width of welding knife: 480 mm, length of welding knife: 380 mm, overall weight: 750 kg, year of last overhaul: 2018, energy consumption: 8 kWh, Neatly refurbished packaging machine with shrink tunnel. Possibility to test run at our location. Maximum speed of 30 pieces per minute. Maximum single fold film width 600 mm. Transport not included. Nkodpfewutu Rex Ad Njt

Condition: good (used), Year of construction: 2015, operating hours: 5,842 h, functionality: fully functional, machine/vehicle number: 2/362594/15, input voltage: 400 V, compressed air connection: 6 bar, input current: 25 A, input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Equipment: documentation/manual, This is a "Meurer Filmline CMB 600 machine", which is no longer in use due to a change in the product range. Shrink film packaging machine with shrink tunnel FILMline CMB 600 The machine is immediately available, has no defects, and is in excellent condition. The current operating hours are 5,842 hours. The dimensions of the machine can be found in the attached document. The machine has been serviced regularly and can be inspected if required. In addition, all original operation manuals (in German and English) as well as electrical diagrams are available in duplicate as folders. Nkedpfxjwxtkts Ad Njt Banding performance: 35 products/min Bundle capacity range: 1x5 / 1x10 Product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm Bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm Machine dimensions X/Y: approx. 3300mm / 3020mm A video of the running production can be provided on request.

Condition: ready for operation (used), Year of construction: 2017, A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible. Nkodpfx Asvf Iydod Net

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-strip Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical specifications: - Length of cross-sealing die: 450 mm Nkjdpfxeiqtuwe Ad Net - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Film support plate optional - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, Western Europe, parts of Eastern Europe, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is achieved via a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this or systems from other manufacturers. Subject to prior sale. Prices are EXW. No guarantee is given for technical data.

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. - Semi-automatic bundle packer - Pneumatic piston - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Nkodpfxjwth Dqj Ad Not Technical specifications Power supply: 380 V Output per minute: 10 bundles Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download data sheet

Condition: as good as new (ex-display), Year of construction: 2024, THE “GIANT” OF SHRINK PACKS Here is the Dibipack 85130 model, a new addition to the Italdibipack range of EXTRA-LARGE “One-step®” systems, theDibipack BIG, the largest models in the Dibipack range, conceived and designed to offer the best answer to the increasing demand for a large machine with large capacity and high performance. Ideal to pack large size and large surface products such as frames, pictures and panels TECHNICAL SPECIFICATIONS TECHNICAL DATA – DIBIPACK 85130 Voltage supply: 400 V - 3 Ph + N Maximum required power: 8 KW Overall dimensions of the machine L x W x H: 2700 x 1500 x 1400 (H) mm Worktop height (on stand): 900 mm Machine weight: 300 kg Sealing area W x L: 850 x 1300 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 1200 mm Output: 4 - 6 pieces / min Notes: We reserve the right to make technical changes. The performance depends on the operator and the type of packaging. MORE INFORMATION Nksdpemv Engjfx Ad Nst An excellent result obtained by the Italdibipack Research and Development team, which gathered all the market needs and transformed them into a successful solution. With this new “giant”, the Dibipack 75125 and Dibipack 85150 models are “retired” thanks to the new dimensions of the sealing bars (850 x 1300 mm) that can accommodate a larger range of dimensions of the product. This new model has the same specifications as the shrink wrapping machines of the Dibipack line, but with some peculiarities: for example, two holding magnets that keep the hood closed during the work cycle and two fans that ensure better heat circulation. The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLD FILM). The machine is manufactured in accordance with CE regulations.

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-belt Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical Specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Automatic length compensation to reduce the die gap - Film support plate available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650 SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Nsdpfx Adsh N Dwfo Nekt Product timing is controlled by a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this machine or systems from other manufacturers. We reserve the right to sell the product at any time. Price is EXW. No guarantee is given for technical data.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 4317, type of input current: three-phase, product height (max.): 150 mm, product length (max.): 620 mm, product width (max.): 380 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 16 A, width of welding knife: 650 mm, length of welding knife: 480 mm, overall weight: 650 kg, power: 7 kW (9.52 HP), energy consumption: 7 kWh, Equipment: documentation/manual, Complete IFP stainless steel packaging machine with shrink tunnel. Testing at our location is possible. Maximum speed of 30 pieces per minute. Maximum single film width 600 mm. Transport not included. Nsdpfx Aewutxcod Nskt

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, AUTOMATIC L-SEALING MACHINE WITH INTEGRATED TUNNEL MODEL F-AUTO 3550 COMBO from 2011 Max. product length: 500 mm Max. product width: 350 mm Nedpfx Aow Nx Nbod Nskt Max. product height: 150 mm Film type: Polyolefin - PE Infeed and outfeed height: 900 mm + 50 mm adjustable Output (A4 format): Depending on the product – up to 35 packs/min Film roll diameter: Int. 76 mm / ext. 350 mm Max. roll width: 550 mm Voltage and power consumption: 230V/400V, 3-phase, 8 kW Pneumatic supply: 6 bar Weight: 700 kg Dimensions (LxWxH): 2700 x 1200 x 1550 mm

Condition: not inspected (used), Year of construction: 2011, MINIPACK-TORRE SC55 – SHRINK WRAPPING MACHINE YEAR 2011 Nkjdpswu Hczsfx Ad Not

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 2,000 mm, total height: 1,700 mm, total width: 1,700 mm, overall weight: 800 kg, Film packaging machine with shrink tunnel. The BVM Brunner Compacta 4010 is a fully automatic side-sealing packaging machine for packaging products in semi-tubular film. It seals the film on three sides and achieves up to 100 cycles per minute. The machine is particularly suitable for the book, textile, and shipping industries, processes various types of film, and can be quickly adjusted to different product sizes. Ideal for efficient and flexible packaging. No guarantee for technical specifications. Nkjdpfx Adjw E Imij Nst The machine is checked and cleaned. EXW. On request, we also offer service and installation of the machine.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 11,000 mm, length of welding knife: 450 mm, pass-through height: 200 mm, input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), Hugo Beck film packaging system Servo X with shrink tunnel SL5015, including 2 pusher feeders and 1 rotary feeder. The machine was manufactured in 2011. The system operates with a center-folded film. The product is fed into the product line either manually or via the three included feeders. The line then conveys the product into the center-folded film, which is subsequently sealed on three sides and shrunk in the shrink tunnel. The system includes: 1 x Film packaging machine NEO X 1 x Hugo Beck shrink tunnel SL5015 Nkjdpfx Aow Eaviod Njt 1 x Rotary feeder TA 4415 2 x Universal feeders HB 350 On request, we also offer installation and service for this or systems from other manufacturers. Interim sale subject to prior sale. Price is EXW. No guarantee for technical data.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Nsdpfxevvlyij Ad Nskt Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.