Used Shotblast Machine for sale (64,768)

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Ijdpscnxa Nofx Ahyebc Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Isdpfx Ascnxc Nohyjbc Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: new, Year of construction: 2024, Axis distance: 920 mm X-axis: 3000 mm Material thickness: Z 12 mm - 30 mm Feed rate: 20 m/min. A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm Ibsdpfxjcnz H Hs Ahyec The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade moves in the X-direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Ibodpshp Rc Iefx Ahysc Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. Ibedohqb Rcepfx Ahyec A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Ibjdpfx Aji Am Ukohysc Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. Iedpfx Ahed R Ev Dsyebc The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Ibsdpfx Ahjfig Rwoyjc Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Ibsdpfjlht Hzex Ahyjc Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Ibsdpfx Ahor Id S Esyoc Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Iedpfor Ig H Tex Ahyobc Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Ibjdpfxjvk Scge Ahyoc Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Iodpfx Ajvutw Hshyebc Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Ibjdov Trlmopfx Ahyoc Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Ijdpow D T Dkofx Ahysbc Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops Iedpfx Ahoxdttpoyebc - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Ibodpfxshp Rcro Ahyec Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Ijdpfx Aowuclxehyjbc

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Isdpfx Ahozra Rqjysbc Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Ibjdpfxoztyabs Ahysc Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Iedpfx Ahsyfwcreysbc Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Ibedpfxszlp Ixo Ahyec Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.

Condition: excellent (used), REMS TORNADO 2010 THREADING MACHINE Product description: - Reliable, highly efficient machine for threading, cutting, deburring, thread rolling, and facing - For installation work, locksmith shops, and production facilities - Robust, compact, and adaptable design suitable for construction sites and workshops - Operating principle: rotating workpiece – stationary tool - Automatic features: clamping chuck, universal threading head, lubrication, and cooling - Large work area and chip collection container - Adjustable workpiece support - Extremely powerful and fast drive, e.g., threads a 2" pipe in just 15 seconds - Gearbox is completely maintenance-free and operates in an enclosed oil bath - Two base options: - Portable version on 3 legs, with a detachable, large oil bath and chip container - T-shaped base with an integrated, larger oil bath and chip container, for placement on a table. Fixed base or mobile trolley with a storage area for workpieces, for easy transport, at an optimal working height, stable design, available as optional extra - Three high-performance motors to choose from: - High-efficiency universal motor, 1700 W, overload protection, rotational speed 53 rpm. - Capacitor motor, 2100 W, overload protection. Two rotational speeds: 52 and 26 rpm, even under full load. Very quiet operation. - Three-phase motor, 2000 W, overload protection. Two rotational speeds: 52 and 26 rpm, even under full load. Very quiet operation. - Convenient-to-use, two-stage foot switch with an emergency stop button, allowing the operator to lean fully on the machine during operation - Two automatic clamping chucks with self-centering jaws. Quickly and easily clamps and releases the workpiece - Self-tightening chucks provide maximum clamping force - Powerful, reliable pump with high flow rate Iedpfsz Sk Imsx Ahyobc - Optimal, multi-directional guidance of the threading tool through the threading head ensures precise threading in the correct location, guaranteeing clean threads and long service life for the threading dies, gearbox, and motor - Only one automatic universal head for all threads, including long threads; automatically opening - with automatic thread length control for tapered threads - Fast, easy adjustment of thread size - Clear thread scale - Easy and quick replacement of threading dies thanks to their positioning in the clamping part - Reliable, durable, high-quality REMS threading dies with optimal geometry, guaranteeing very easy entry into the material, light threading, and clean threads. Made of high-strength, specially hardened steel, ensuring an exceptionally long service life. - Self-centering pipe cutter. Stable bow made of forged steel. Ergonomic, wide handle for firm pressure on the spindle - Specially hardened cutting wheel made of reliable, tough-hard tool steel ensures a long service life. - Internal deburring tool. Stable, easy-to-use deburring tool with adjustable deburring position. - Specially hardened and processed blade guarantees light deburring and exceptionally long service life - Two blades for optimal burr removal, especially for small pipe diameters.

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Ibedpfjzhlr Eex Ahyjc Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) Isdpfx Ahjzizrksyjbc We will be happy to answer any further questions you may have by telephone.