Used Short Screwdriver for sale (3,576)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Nodpfxjviwdmj Afasla Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, USED 20DV OFFICE CONTAINERS FROM ESSEN – AVAILABLE IMMEDIATELY! ✅ Container type: Office container 20DV ✅ Condition: Used, wind and watertight, without equipment, original photos ✅ Features: Electrical installation & heating, entrance door on the short side ✅ Dimensions (LxWxH): 6,058 x 2,438 x 2,800 mm – clear internal height 2,500 mm Nljdpjy Hkvcofx Afaoa ✅ Price is net ✅ Transport: Free & non-binding delivery offer (including unloading if required) – simply provide your postal code ✅ Variety: In addition to office containers, we also supply shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) for storage, construction projects, logistics solutions, or sea transport Contact us now – we are happy to advise you! NAUTEXA GmbH – Your container partner

Condition: used, 20DV DUO OFFICE CONTAINER FROM ESSEN ✅ Container type: Multiple duo office containers/double containers 20DV ✅ Condition: Used, watertight, without equipment, original photos ✅ Features: Containers are equipped with electrical installations and heating. The entrance door is located on the short side. Containers are sold in used condition and may show signs of dirt, color differences, rust, etc. Containers are delivered without equipment (chairs, tables, etc.). ✅ Dimensions (LxWxH) per container: 6,058 x 2,438 x 2,800 mm – internal height 2,500 mm ✅ Availability: Ex Essen ✅ Transport: Free and non-binding delivery quote available (including unloading, if required) – simply provide your ZIP code ✅ Price is per duo unit ✅ Range: In addition to office containers, we also offer shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) for storage, construction projects, logistics solutions, or sea transport Contact us now – we are happy to advise you! Nodpfx Afsy Hku Ssaela NAUTEXA GmbH – Your container partner

Condition: excellent (used), functionality: fully functional, mileage: 55,770 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 12/2021, next inspection (TÜV): 12/2026, emission class: euro6, color: grey, number of seats: 7, number of previous owners: 1, machine/vehicle number: COCK60, Equipment: ABS, air conditioning, airbag, all wheel drive, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, trailer coupling, winter tires, 7992 PAINT COLOR SELENITE GREY METALLIC MB7992 BH1 HOLD function C70 Pedestrian protection C74 Mercedes-Benz illuminated door sill lettering CA1 AGILITY CONTROL suspension CL1 Steering wheel adjustable for tilt and height CL3 Leather steering wheel CL4 Multifunction steering wheel with trip computer CM2 Bumpers and add-on parts painted in vehicle color CU4 Aerodynamics package D14 Anodized roof rails E07 Hill start assist E1D Digital radio (DAB) E1E Navigation system E1T Touchpad E6M MBUX multimedia system Mid EL9 2-way speakers front and rear EZ5 Parking package EZ8 PARKTRONIC F65 Exterior mirrors, electrically folding F72 Exterior and interior mirrors auto-dimming FG0 Center console with roller cover FH0 Trim elements in piano black finish FLK LUXURY WAGON FP3 Mirror package FP5 Sport package exterior FR8 Reversing camera FS5 Illuminated mirrors for sun visors G43 9G-TRONIC HO0 Warm air duct to passenger compartment H15 Seat heating for front passenger H16 Seat heating for driver H20 All-round heat-insulating glass HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC HI1 Climate zone 1 (cold/comfort) HX1 Refrigerant R-1234yf HZO Electric auxiliary heater HZ7 Semi-automatic air conditioning, TEMPMATIC in rear IG4 Standard IH6 Headunit ECE/RoW IKO Complete vehicle IK3 Luxury wagon IL4 Region EU/EFTA IL5 Left-hand drive IL6 Metallic paint IN1 Wheelbase 3200 mm, short overhang J55 Seat belt warning system for front passenger seat JA1 Warning lamp for windshield washer fluid level JA7 Blind Spot Assist JF1 Rain sensor JH3 Communication module (LTE) for digital services JK5 Instrument cluster with color display JP4 Lane package JW5 Lane Keeping Assist JW8 ATTENTION ASSIST JX2 Maintenance interval 40,000 km KB5 Main tank 70 liters KP7 Emissions control SCR generation 4 LA2 Light Assist LB9 Exit lights LC4 Comfort roof control unit LC5 Surround lighting in exterior mirrors LC8 Surround lighting tailgate LE1 Adaptive brake light LG2 LED Intelligent Light System LG4 Rear, brake and indicator lights in LED technology LG8 High beam assist PLUS LP3 Interior lighting package M50 174 kW (237 hp) 4200 rpm MG9 Generator management MJ8 ECO start/stop function M06 Emissions standard Euro 6d M/N1 GR II MS1 CRUISE CONTROL MU8 OM654 DE 20 LA Performance level 5 Top Type MX0 BlueEFFICIENCY package Q50 Towbar with removable ball head QA4 Towing capacity 2500 kg RY2 Tire pressure monitoring for front and rear axles, wireless S37 Outer armrests for individual seats, 2nd row SA6 Passenger airbag SB1 Comfort driver's seat SB2 Comfort front passenger seat Nsdoy Hkg Uepfx Afasla SH2 Thorax-pelvis side airbag, front passenger SH9 Windowbags for driver and front passenger T14 Active catch for sliding door T19 Sliding door left T70 Child safety locks on passenger compartment doors U73 Armrests for passenger compartment seating UR1 Seat track system with quick release US4 3-seater comfort bench, 1st row, outer seat folding US8 Single seat, 2nd row left US9 Single seat, 2nd row right V33 Carpet flooring in rear V36 Roof lining V44 Carpet flooring in front cabin V4Y Fabric "Santos" black VD5 Interior roof lining crystal grey W16 Fixed window front left, in side wall/sliding door W17 Fixed window front right, in side wall/sliding door W32 Electrically operated vent window, rear passenger compartment W64 Separately opening rear window W68 EASY-PACK tailgate W70 Privacy glass for rear compartment, black glass X30 Registration certificate, part II XA5 Weight variant 3,200 kg XMO Model upd

Condition: used, empty load weight: 3,580 kg, maximum load weight: 6,920 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 2,630 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Load capacity 1,500 kg, 4 cylinder aluminum platform 1,800 mm long, 2 roll-off stops, with batteries and charging cable, front with portal doors for loading with short drive-over plate, 14 x lashing eyes, , , , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Njdpsy Hhy Esfx Afaola

Condition: good (used), mileage: 688,844 km, power: 316 kW (429.64 HP), first registration: 01/2021, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 5,970 mm, total width: 2,550 mm, total height: 3,210 mm, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, power mirror, retarder, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamps - Short cab - Manual - Radio/cassette - Lane departure warning system - Fabric upholstery - Additional braking system = Notes = Number of axles: 2, Configuration: 4x2, Curb weight: 7,143 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 300 liters, Fifth wheel height: 124 cm, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Flashing lights, Engine power: 316 kW (424 Hp), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: Automatic, Transmission model: Scania, Gears: 14, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Starter battery, Seat configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 14 gears, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tire tread left: 5 mm; Tire tread right: 4 mm; Suspension: Leaf spring Axle 2: Twin tires; Tire tread left inside: 9 mm; Tire tread left outside: 7 mm; Tire tread right inside: 7 mm; Tire tread right outside: 8 mm; Suspension: Air suspension Weights Unladen weight: 7,143 kg Payload: 10,857 kg Gross vehicle weight: 18,000 kg Maintenance APK (Roadworthiness Test): valid until 11.2026 Condition Technical condition: good Nlsdpey Hguuofx Afaja Visual condition: good Damages: none Number of keys: 1 Financial Information Leasing rate: €421 per month (default, 60 months); Please inquire for more details and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 610,562 km, power: 309 kW (420.12 HP), first registration: 11/2017, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,620 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 6,050 mm, total width: 2,550 mm, total height: 3,310 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph Nlodey Hgtkjpfx Afaoa - Tachograph (control device) - Fixed (mounted) - Halogen lights - Hydraulic system - Short cab - Manual - PTO (power take-off) - Pump - Radio/cassette - Lane departure warning system - Fabric upholstery - Additional brake system = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,428 kg, Gross weight: 19,000 kg, Total fuel tank capacity: 300 liters, Fifth wheel height: 127 cm, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning assistant, Climate control, Seat heating, Bluetooth, Beacon lights, Engine power: 309 kW (414 Hp), Fuel: Diesel, Euro standard: Euro 6, Transmission type: Automatic, Transmission brand: Scania, Gears: 14, Additional brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Hydraulic system, PTO (power take-off), PTO type: 1, Starter battery, Pump, Central locking, Seating configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 14-speed, automatic Axle configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tire tread left: 3 mm; Tire tread right: 4 mm; Suspension: Leaf suspension Axle 2: Twin tires; Tire tread left inner: 5 mm; Tire tread left outer: 3 mm; Tire tread right inner: 5 mm; Tire tread right outer: 4 mm; Suspension: Air suspension Weights Unladen weight: 7,428 kg Payload: 11,572 kg GVW: 19,000 kg Functional Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent traders in used vehicles. You can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-moving inventory • Recognizable quality • Competitive pricing • Reliable business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged swiftly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 309,400 km, power: 210 kW (285.52 HP), first registration: 12/2015, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,600 mm, total width: 2,550 mm, total height: 3,680 mm, loading space length: 8,300 mm, loading space width: 2,490 mm, loading space height: 2,250 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, seat heater, tail-lift, traction control, = Additional options and accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Halogen headlights - Short cab - Tail lift - Manual adjustment - Reversing camera - Lane departure warning system - Fabric upholstery - Auxiliary brake system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 10,259 kg, Gross weight: 20,500 kg, Total fuel tank capacity: 630 litres, Fifth wheel: Fixed, Number of differential locks: 1, Suspension system: Air suspension, Cab type: Short cab, Cruise control, Tachograph, Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Colour: White, Heated mirrors, Reversing camera, Headlight type: Halogen, Lane departure warning system, Seat heating, Engine power: 210 kW (282 hp), Fuel type: Diesel, Emission standard: Euro 6, Transmission type: AS-Tronic, Gearbox: ZF, Number of gears: 12, Auxiliary brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: Rear gate, Tail lift capacity: 1,500 kg, Tail lift manufacturer: Palfinger MBB C 2000S, Tail lift material: Aluminium, Tail lift dimensions: 232 x 251 cm = Further information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steering; Tyre tread depth left: 4 mm; Tyre tread depth right: 6 mm; Suspension: leaf springs Axle 2: Twin tyres; Tread depth left inner: 4 mm; Tread depth left outer: 4 mm; Tread depth right inner: 11 mm; Tread depth right outer: 12 mm; Suspension: air suspension Weights Unladen weight: 10,259 kg Payload: 10,241 kg Gross vehicle weight: 20,500 kg Functional Tail lift: Palfinger MBB C 2000S, rear gate, 1,500 kg Loading height: 125 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Identification Registration number: KLEYN1 Nlodpfxsy Hgryo Afasa = Company information = Kleyn Trucks is one of the world's largest independent dealers for used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units and trailers. Our range includes all European brands, model years and price categories. Why buy from Kleyn Trucks? It's easy! • Large, fast-changing stock • Recognisable quality • Competitive pricing • Reliable service • Multilingual team • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Expert technical services • The safety of 'recognisable quality' • And much more.... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an enquiry through our website. Ask directly about our European guarantee packages.

Condition: good (used), mileage: 190,542 km, power: 279 kW (379.33 HP), first registration: 02/2018, fuel type: diesel, tire size: 000/13R22,5, axle configuration: 6x4, wheelbase: 4,600 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, total length: 9,930 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 6,270 mm, loading space width: 2,450 mm, loading space height: 760 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed fifth wheel Nedpey Hgqvsfx Afaola - Halogen headlights - Short cab - Manual adjustment - Radio/cassette - Reversing camera - Fabric upholstery = Remarks = Number of axles: 3, Configuration: 6x4, Total tank capacity: 330 liters, Fifth wheel: Fixed, Number of diff locks: 2, Suspension type: Leaf suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen, Climate control, Bluetooth, Flashing lights, Engine power: 279 kW (374 hp), Fuel: Diesel, Emission standard: Euro 6, Transmission type: Optidriver, Gears: 12, Power steering, ABS, ASR, Starter battery, Number of sides: 1 side, System type: ., Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Crane: Palfinger PK17001SLD3 = Further Information = Axle Configuration: Tyre size: 000/13R22.5 Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Steering; Tyre tread left: 3 mm; Tyre tread right: 3 mm Axle 2: Twin tyres; Tyre tread left inner: 3 mm; Tyre tread left outer: 4 mm; Tyre tread right inner: 5 mm; Tyre tread right outer: 4 mm Axle 3: Twin tyres; Tyre tread left inner: 4 mm; Tyre tread left outer: 2 mm; Tyre tread right inner: 1 mm; Tyre tread right outer: 2 mm Functionality: Crane: Mounted behind the cab Loading platform height: 153 cm Condition: Technical condition: Good Visual condition: Good Damage: None Number of keys: 1 Identification: Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? It's simple! • Large and fast rotating stock • Recognizable quality • Competitive prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates issued quickly • Expert technical service • The security of 'recognizable quality' • And much more... Please visit our website for special offers and our full stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask us directly about our European warranty package.

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Nlodpjxyiiljfx Afaea

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Nsdpfjvvi Nzjx Afaela

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Nledpfx Afevvi Rfeasa

Condition: used, machine/vehicle number: 101506, Eyelett Thickness: 5,5 mm Projection 320 mm Activation via foot switch Working height 900 mm Cycle time/performance sec.0.50 sec Width 1,200 mm Depth 900 mm Net weight 420 kg Nedpfxot Na Ecj Afaela Gross weight 480 kg very good condition short-term available

Condition: new, Year of construction: 2025, NEW MACHINE Mohr D 56 ECO Accessories: 2 HSS knives On-board tool Documentation available at short notice Nlsdpjwkrilsfx Afasa

Condition: used, Year of construction: 2002, 4 buckles Knife / pocket / knife with SB-66 MP.D press stack delivery (with marking device) Very good condition Nledpfx Ajx H Sv Rsfaoa Available at short notice

Condition: used, Year of construction: 2014, Horizon Folding Machine AF-566-F with GFB-56 Gatefold Buckle and LCV-54 Delivery 2nd unit:Stahl 2T 52.3T, Baujahr 1997 Technical data: Format Max.: 558x850 mm (1,100 mm*) Format Min.:128x148 mm (105x148 mm*) Maximum fold length: 450 mm Minimum fold length: 35 mm (58 mm in pocket 1) Paper weight: 40 – 250 g/m² Output: max. 240 m/min, 50,000 cycles/h Feeder stack height: 740 mm Special Equipment: Hubs for the cutting unit, each with 2 perforation tools and 2 cutting knives Very good condition Nledpfxeyftwlj Afaea Available at short notice

Condition: used, Year of construction: 1994, Dürselen 2-spindle drilling machine Njdpfx Afeyf Hzdsasla Good condition Available at short notice

Condition: used, Year of construction: 2018, only approx.16K plates done Format 830 x 660 mm Apogee Workflow RIP Inlinepunch Nljdpfx Asyt I Unsfaja Azura C95 Clean out unit Stacker ST 95EX Available: at short term

Condition: used, Year of construction: 2011, Display, Program, Airtable, Table left, Table right Njdpoy Exhqofx Afaela 230.000 cuts only, approx. Available: at short term

Condition: used, Strip inserter Mediprint Str. 4.2 Sword length: 80 cm Nledeyguraopfx Afaoa Max. tripod height: 1,450 mm good, working condition available at short-notice

Condition: used, Year of construction: 2002, Single-head wire-stapling machine (“Klopfer”) for block, booklet and optional ring-eyelet stapling Quick changeover between block and saddle-stitch stapling Hohner’s signature wedge cut for optimal wire alignment. Technical specifications • Stapling capacity: up to 203 staples/minute • Number of stapling heads: 1 • Max. stapling thickness: 25 mm (folded), 40 mm (double-sided) • Ring-eyelet stapling: up to 3 mm (optional) • Round stapling wire: No. 21–30 (0.80–0.35 mm) • Flat staples: 0.70×0.35 to 0.96×0.78 mm • Stapling table size: 700 × 240 mm • Insertion depth: block stapling 95 mm, saddle stapling 290 mm • Working height: 880 mm • Motor power: 0.55 kW • Voltage: 230/400 V, 50 Hz • Overall height: 1540 mm • Footprint: 900 × 700 × 1540 mm • Weight: 200 kg (net), 240 kg (gross) • Noise emission: < 82 dB(A) Applications • Brochures • Pads Nsdpfeyv Eyzsx Afasla • Calendars • Pads Available at short notice

Condition: used, Year of construction: 2001, Display Program Airtable, Table left, Table right Available: at short term Nledjyyvndopfx Afasa

Condition: used, Year of construction: 1999, Display, Program, Nodpfx Afjyanmdsaola Airtable, Table left, Table right short-term available

Condition: used, Year of construction: 2010, 530 x 740 mm (20×29″) approx. 176 million prints PressCenter AxisControl Alcolor Nodop Ugwtepfx Afasla Autoplate extended delivery Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control perfecting 2/3 antistatic device scale feeder powder device, available at short-notice

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 Nlodpfx Afeud U D Ieasa 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Rear -and front-mounted slitter shafts Gate-fold unit Available: at short term