Used Sheeter And Slitter for sale (5,922)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: badge_tk, Smooth exterior walls, badge_isoboden Equipment: -+10°C to -20°C -GOVI 2000P -100mm Iso wall Net: €13,781.51 / Gross: €16,400.00 Article number: ERT230301619.01 Technical data: • Brand: Other • Model: ER 3.0 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 300 x 165 x 190 cm • External dimensions (L x W x H): 457 x 230 x 256 cm • Loading height of the floor: 59 cm • Permissible total weight: 3,000 kg • Tare weight: 800 kg • Payload: 2,200 kg • Chassis: Low loader (wheels beside the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Torsion-resistant chassis for safe driving characteristics • Continuous, maintenance-free commercial axles with reinforced axle supports, hot-dip galvanized • Single-wheel suspension with large suspension travel, high inherent damping and soft suspension. • This provides the highest driving comfort and optimal driving safety, even under extreme loads. • Special Iso sandwich floor, 100 mm thick - insulated with a non-slip, sand-coated surface • 4 stable telescopic crank supports • Roof and side walls 100 mm thick - insulated from seamless plastic sandwich panels with rigid foam insulation • The Iso body has an ATP certificate, with a lambda coefficient = 0.33 W/mK • Exterior color: white • Floor, roof and corner trim made of aluminum (anodized), mounted without thermal bridges • 2-leaf Iso doors with stable hinges and swivel rod lock made of V2A stainless steel (lockable) • Rubber seals of the rear doors with 5 sealing blades • The rear door can be opened from the inside in an emergency • Stainless steel rear frame system • Doors can be swung 270° with door holder • Aluminum impact protection at the bottom, wrapping around on 3 sides • Standby cooling GOVI Arctic 2000 P • Cooling capacity in watts at a cooling chamber temperature of -20° C and an ambient temperature of 40° C • Temperature control range from +10° C to -20° C • Air volume flow evaporator: 1100 m³/h • Completely encapsulated unit with "outdoor" housing mounted at the front on the top • Electronic automatic defrost of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • Very stable V-drawbar, REINFORCED Gsdpfx Asz Ri Hqjkyokc • ALKO overrun device and parking brake • Reverse automatic • Plastic fenders • 13-pole plug • Rear lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Outline lights with rubber arm at the rear on the top • Reinforced automatic support wheel, for safe parking of the loaded trailer

Condition: new, *IMMEDIATELY AVAILABLE* Includes: badge_tk, smooth exterior walls, badge_isoboden Equipment: -GOVI 2000P -2 compartments -Deep-freeze & chiller Net price: €14,747.90 / Gross price: €17,550.00 Article number: ERT115251518.25 Technical data: • Brand: Other • Model: ER 2.5 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 250 x 150 x 180 cm • External dimensions (L x W x H): 427 x 220 x 243 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,500 kg • Tare weight: 600 kg • Payload: 900 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Torsion-resistant chassis for safe driving characteristics • Continuous, maintenance-free commercial axle with reinforced axle supports, hot-dip galvanized • Single-wheel suspension with large suspension travel, high inherent damping and soft suspension. • This ensures maximum driving comfort and optimal driving safety, even under extreme loads. • Special insulated sandwich floor, 100 mm thick - insulated with a non-slip, sanded surface • 4 stable telescopic crank supports • Roof and side walls 100 mm thick - insulated with seamless plastic sandwich panels with rigid foam insulation • The insulated body has an ATP certificate, with a lambda coefficient = 0.33 W/mK • Divided cooling compartment in the trailer with partition and separate temperature control for deep-freeze and chiller • Exterior color: gray • Floor, roof and corner edging made of aluminum (anodized), mounted without thermal bridges • 2-door insulated doors with stable hinges and rotating bar lock made of V2A stainless steel (lockable) • Rubber seals of the rear doors with 5 sealing blades • In an emergency, the rear door can also be opened from the inside • Stainless steel rear frame system • Doors can be swung 270° with door lock • Aluminum ram protection at the bottom, running around three sides • Standby cooling GOVI Arktik 2000 P Gsdsz Ri Hwspfx Akyjkc • Cooling capacity in watts at a cooling compartment temperature of -20° C and an ambient temperature of 40° C • Temperature control range from +10° C to -20° C • Air volume flow evaporator: 1100 m³/h • Completely encapsulated unit with "outdoor" housing, mounted at the front on the top • Electronic automatic defrost of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reversing aid • Plastic fenders • 13-pin plug • Reversing light • Large safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Outline lights with rubber arm at the rear on top • Reinforced automatic support wheel, for safe parking of the loaded trailer

Condition: good (used), For sale: a conveyor belt with a length of [length] meters, ready for operation. ✅ Length: [length] meters ✅ Belt width: [width] meters Godpfoz N Tfnex Akyskc ✅ We can arrange transportation ✅ A wide selection of conveyor belts is available on site. Please contact us. We will help you choose the right conveyor belt for your needs.

Condition: used, Year of construction: 2008, Surface planer and thickness planer Manufacturer: Werkhuizen Landuyt Year of manufacture: 2008 Technical data Planing width: 510 mm Planer cylinder: 100 mm Knives: 4 pieces Knife dimensions: 510x30x3 mm Planer cylinder speed: 6,000 rpm Max. material removal (surface planing): 6 mm Length of planing table: 2,250 mm Planing fence: approx. 1,100 - 1,350x200 mm, adjustable from 45-90 degrees Thickness planer height: up to 250 mm Thickness planer table: approx. 1,050x510 mm Feed rollers: 50 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding. Godpfx Akoz Hwk Uoyjkc

Condition: new, Year of construction: 2026, functionality: fully functional, Cardboard machine, Vision 2800, automatic type for processing continuous cardboard from a stack Machine description: The machine listed here belongs to the series of statically operating machines, meaning that the processing operations across the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 2,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting unit for head and foot cuts and cross cuts on the cardboard. Linear cross-scoring unit for cross-scoring on the cardboard. Gkodpfxoz I T Ilo Akyec (Delivered as a cross-scorer, cross-scorer with perforation function) Longitudinal scoring units from above for longitudinal scoring on the cardboard. Longitudinal cutting units for performing longitudinal cuts. 2) Cardboard magazine, 7-position 7 cardboard magazines provide the storage and feeding of the raw cardboard to the processing machine. Stack height of continuous corrugated cardboard up to a maximum of 2,200 mm is possible. 3) Control cabinet, control system, electronics: Contains all components required to operate and control the system. The components in the control cabinet are based on Siemens.

Year of construction: 2006, condition: refurbished (used), machine/vehicle number: classic 600, FOR SALE – FRIGOSCANDIA CLASSIC 600 SPIRAL FREEZER Manufacturer: Frigoscandia Model: Classic 600 Equipment type: Industrial Spiral Freezer Belt width: 600 mm nominal Application: Industrial food processing and continuous product freezing Equipment Description Available for sale is a Frigoscandia Classic 600 industrial spiral freezer, designed for high-volume continuous freezing of food products in commercial and industrial food-processing facilities. The machine features a multi-tier spiral conveyor system that allows products to pass through a temperature-controlled freezing enclosure, providing efficient product handling and making effective use of available factory floor space. The Frigoscandia Classic range is suitable for a variety of food-processing applications, including meat, poultry, fish, bakery products and prepared foods, subject to the machine's original configuration. The equipment may include the spiral conveyor belt, drive assembly, motors, gearboxes, evaporator, circulation fans, insulated enclosure, electrical controls and product transfer interfaces. The precise specification and completeness are to be confirmed. Sale Information - Manufacturer: Frigoscandia - Model: Classic 600 - Condition: To be confirmed - Operational status: To be confirmed - Year of manufacture: To be confirmed - Location: Available on request - Price: Offers invited Inspection can be arranged by appointment, subject to availability and site access requirements. Interested buyers are invited to enquire for further technical information, photographs, dimensions and pricing. Gkodpfxez Nzm Hj Akysc

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Gkodpfxegph Rne Akyec Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Mimu Machine Tools (Italy)

Condition: used, mileage: 48,976 km, power: 170 kW (231.14 HP), first registration: 09/2004, fuel type: diesel, overall weight: 11,900 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2020, color: yellow, gearing type: mechanical, emission class: euro3, Year of construction: 2004, Equipment: ABS, air conditioning, all wheel drive, compressor, Unimog U 400, bidirectional operating equipment Manufacturer: Zweiweg Wagon braking system, 800 tons Coupling rod at the front and rear Gkodpfx Aji R Ah Hjkyec Theimeg remote control Derailment sensors

Condition: used, Field of application: Construction CAT988 Marble Fork, Bucket and Quick Coupler Loader marble attachments are specialized tools designed to fit on loaders to handle, lift, and transport marble blocks safely and efficiently. These attachments are optimized to comfortably carry buckets, forks and quick coupler according to marble's weight. Their design ensures minimal damage to the marble while providing stability during transport and operations. Gjdpfxsphqrpe Akyskc These attachments are essential in quarries and processing facilities where large marble blocks are frequently moved.

Year of construction: 2018, condition: used, Multivac R270CD with skin pack and MAP pack. Overhauled in 2018, this machine came out of production week 37 2024. Machine comes with several moulds, spares and with 3 vacuum pumps incl. - Booster pump - Busch R5 360m3/h Gedjuk Sp Nepfx Akyekc - Busch R5 100m3/h Only 668 production hours, everything build in. Good to go for production. Dimensions from all the tooling is in the photo album

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Godpfjymcmfsx Akyskc Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: used, functionality: fully functional, working range: 2,320 mm, Slitter rewinder Goebel web widht - 2320 mm rotary mechanism at the receiving station Gjdpfx Aeypua Aekyjkc

Condition: new, functionality: fully functional, Year of construction: 2026, This facility, which we manufacture for the crushing and screening of dolomite at a capacity of 250 to 300 tons per hour, includes the following equipment: Jaw Crushers, VSI Vertical Shaft Crushers, Secondary Impact Crushers, and Tertiary Crushers. Gkodpfx Akexqx Nisyec Contact us now to purchase this example plant or a new crushing and screening plant that we can customize to your specifications.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! Gsdpfsxu Upmox Akyokc The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Gkedjwq Sc Sepfx Akyjc Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: excellent (used), mileage: 626,000 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 6,180 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 10,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,650 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, electric window regulation, power mirror, spoiler, tail-lift, traction control, = Additional options and equipment = - Heated mirrors - Comfort driver's seat - Roof spoiler - Speed limiter - Radio/CD player - Sun visor - Toolbox = Remarks = M.A.N. TGM18.250BL 4x2 CHASSIS WITH PLYWOOD BOX, D'HOLLANDIA DHLM 1,500 KG TAIL LIFT, AS-TRONIC GEARBOX & AIR CONDITIONING (ENGINE PROBLEM!!) 250HP, EURO 5, 6 CYLINDER ENGINE!! (ENGINE PROBLEM!!) AS-TRONIC GEARBOX!! AIR CONDITIONING!! SUN VISOR!! ROOF SPOILER!! ETC.!! MULDER PLYWOOD BOX: DIMENSIONS: LENGTH x WIDTH x HEIGHT: approx. 7.65 m x 2.48 m x 2.65 m (INTERNAL)!! D'HOLLANDIA DHLM 1,500 KG TAIL LIFT!! SIDE DOOR ON RIGHT SIDE!! STAINLESS STEEL TOOLBOX!! ETC!! TRUCK HAS ENGINE PROBLEM AND IS NOT DRIVEABLE, WE CAN TRANSPORT THIS TRUCK FOR YOU!! MORE M.A.N. 4x2 / 4x4 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE: SHIPPING, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US! WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (?v=G1cTWpn_7kQ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine capacity: 6,871 cc Transmission Gearbox: AS-TRONIC, 6-speed, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle: Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,765 kg Payload: 10,235 kg Gross vehicle weight: 19,000 kg Functional Tail lift: D'HOLLANDIA DHLM 1500, tailgate, 1,500 kg Superstructure make: MULDER PLYWOOD BOX WITH LOADING PLATFORM Loading platform height: 110 cm Condition Technical condition: good Gkedpfxoyfhuro Akysc Optical condition: very good Identification Registration: BZ-TL-02 Further information Please contact Sales Department or Erik Engel for more information.

Condition: good (used), Three Used Handtmann FPVLH242 High-Speed Sausage Lines – Rare Opportunity We are offering a rare opportunity to acquire three used Handtmann FPVLH242 high-speed sausage lines, available as a complete system. These advanced lines are designed for precision high speed (up to 3,000 portions per min) sausage production, ensuring high efficiency, consistency,industrial processing. Each line includes: ✔ Handtmann FPVLH242 high-speed sausage stuffer & linker ✔ Dedicated feed hopper ✔ Integrated pumping system The Handtmann FPVLH242 is renowned for its high-speed operation, precise portioning, and automated linking, making it an ideal solution for large-scale sausage production. These systems are rarely available in such a complete configuration, presenting an exceptional opportunity for processors looking to expand or upgrade their production capacity. Act now—these units won’t stay on the market for long! Contact us today for full specifications, pricing, and availability. Gsdpfxovxhxyo Akyekc

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD750/9, Technical data: 1 Vetter / Demag pillar jib crane NL 250KG with Demag chain hoist Godsvv Npzspfx Akyjkc Type AS2.5-3 Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.95m UK boom: approx. 3.7m Reach: approx. 3.2m Hook height: approx. 3.3m Total weight approx. 800Kg including dowel plate 630mm with Demag DC chain hoist 250Kg Swivel range 270°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: ready for operation (used), Two Machines Gksdpfx Akexlknmeyjc Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: used, SLITTING LINE GEORG 1500x1.5x25 Main technical data Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1850 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn 2 Slitting heads PLC: Siemens S7 1200 Cutting capacity: number of cuts with 350 MPa 24 cuts for thickness 0.25 mm 28 cuts for thickness 0.50 mm 21 cuts for thickness 0.75 mm 18 cuts for thickness 1.00 mm 15 cuts for thickness 1.25 mm 12 cuts for thickness 1.50 mm Scope of supply 1. Coil Carriage 2. Uncoiler 3. Guiding system with 2 measured edges 4. 203.2 diam. Pinch roll before shear 5. Double interlock table 6. Slitting shear:Shaft diameter: 160 mm 7. 1 off line quick change slitting head available Gsdpfoxl R A Rex Akyjkc 8. Scrap press and conveyor 9. Intermediate coil table 10. Loop Pit and covering tables 11. Strips Braking Unit 12. Motorised recoiler with hold down separator arm 13. Unloading Coil Car 14. 4 arms turnstile 15. Electrical cabinets & Control panels 16. Existing tooling 17. Existing documentation Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1800 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn Slitting heads: 2 PLC: Siemens S7 1200 For thickness 0.25 mm: 24 cuts with 350 MPa For thickness 0.50 mm: 28 cuts with 350 MPa For thickness 0.75 mm: 21 cuts with 350 MPa For thickness 1.00 mm: 18 cuts with 350 MPa For thickness 1.25 mm: 15 cuts with 350 MPa For thickness 1.50 mm: 12 cuts with 350 MPa

Condition: new, functionality: fully functional, power: 52.96 kW (72.01 HP), fuel type: diesel, fuel tank capacity: 120 l, color: red, empty load weight: 7,700 kg, maximum load weight: 3,000 kg, emission class: euro5, operating hours: 1 h, Equipment: all wheel drive, cabin, EQUIPMENT AND ADVANTAGES: - Electro-hydraulic joystick for easy one-handed control - Hydraulic quick coupler and front hydraulic outlet for fast tool changes - Electro-hydraulic proportional control for precise operation - Swivel frame with leveling function for greater stability - Radio with USB and Bluetooth - Load securing indicator for increased safety - Cab doors open separately at the top and bottom - Three wipers (front, top, rear) for optimal visibility - Efficient coolers for hydraulic oil, torque converter, and water TECHNICAL DATA: Model: 830 Load capacity: 3,000 kg Gksdpfxewzb Ufe Akysc Max. lifting height: 8,000 mm Operating weight: 7,700 kg Engine: Yanmar 4TNV98CT, 53.7 kW / 72 hp Rated speed: 2,500 rpm Cooling system: liquid-cooled Engine type: 4-cylinder, 4-stroke diesel DIMENSIONS: Length (without attachments): 7,400 mm Width: 2,195 mm Height to cab roof: 2,600 mm Bucket size (L × W × H): 1,850 × 1,300 × 900 mm Telescopic arm movements: Rotation: 42° Lifting time: 11.5 s Lowering time: 9 s Extension time: 6 s Retraction time: 11 s Bucket tilting: 3.5 s Bucket dumping: 3 s HYDRAULICS: Working pressure: 28 MPa Pump output: 117 l/min Tank capacities: Fuel: 120 l Hydraulic oil: 160 l Further details: Tires: 16/70-24 Brakes: disc brake Transmission: hydrodynamic Max. speed: 34 km/h Gears: 4 forward / 4 reverse Shifting: electrohydraulic + mechanical Drive: all-wheel drive Steering angle: 27° Track width: 1,760 mm Wheelbase: 2,800 mm PRICE: €50,500 net €60,095 gross

Condition: new, functionality: fully functional, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Gksdpfxow Ufplo Akyec Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, color: yellow, empty load weight: 990 kg, operating hours: 1 h, Now only €6,500!! BAGGER 1000 – professional and durable. The BAGGER 1000 model is the perfect equipment for the most demanding construction, electrical, hydraulic, repair, and service companies in related industries. We also guarantee equipment servicing after the warranty period has expired. Our mini excavators are manufactured under the supervision of European technicians. The equipment is built on a robust structure and can operate under all conditions. TECHNICAL DATA: - Weight: 990 kg - Engine: Koop - Number of cylinders: 1 - Euro 5 - Oil cooler: YES - Maximum speed: 1.3 km/h - Maximum climbing ability: 30° - Pump type: gear pump Gsdpew Ufraefx Akyjkc WORKING RANGE: - Maximum digging reach at ground level: 2850 mm - Maximum digging depth: 1650 mm - Maximum dump height: 2610 mm - Maximum unloading height: 1850 mm - Maximum vertical digging depth: 1375 mm - Blade lift height above ground: 345 mm - Blade lowering depth: 255 mm DIMENSIONS: - Overall length: 2300 mm - Overall height: 2300 mm - Overall width: 930 mm PRICE: net €6,500 gross €7,735 - INCLUDES 3 excavator buckets (20, 40, 80 cm) - For machines regularly maintained by us, we extend the warranty to three years (warranty valid exclusively for machines purchased directly from us – not from other dealers). - FREE 12-month WARRANTY – after this period, we supply all original parts if required! - We operate our own mobile service, reaching all our customers in Germany and beyond. - FREE delivery within a 200 km radius - VAT-free sales possible (with EU VAT number only) - FINANCING is available. KINGWAY DEUTSCHLAND e.K. is the only authorized stationary dealer for the Kingway brand in Germany. Only with us can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a wide selection of machines in stock – approximately 70 models are always available. We deliver machines to all of Germany, Austria, Switzerland, Italy, and other neighboring countries. In addition, we provide our customers with unrestricted access to all spare parts. Make an appointment and come for a test drive!

Condition: used, Year of construction: 1990, Max pressure: 28 Bar Flow: 120 m³/h Suction dimension: 20 cm Discharge dimension: 20 cm Used for: Oil, Flammable Liquid Dimensions (LxWxH): 4 x 1.3 x 1.65 m Approx. weight: 3,800 kg Operating hours: 76 since new Gkedpfx Akjywi Ixjyec

Condition: used, Year of construction: 2004, power: 16.2 kW (22.03 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edgebanding thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Connected load of the basic machine 16.2 kW Power supply 400 V / 50 Hz / 3-phase Pre-milling unit Gluing unit Quickmelt End trimming unit with program-controlled switching between straight and bevel trimming Combination trimming unit for flush, bevel and radius trimming Corner rounding unit Profile scraping unit Flat scraping unit Buffing unit for polishing the edges Release agent spraying system Gedpfx Akez Rgpcsyskc Additional equipment: Hot air system Schugoma HDL3020 Retrofitted hot air system, year of construction 2015 Power 6 kW Separate control unit Hot air activation of the functional layer of compatible zero-joint edgebanding (laser edgebanding) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse