Used Sheet Metal Work for sale (53,879)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Iiedpfx Aaozmafqe Esd

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW Iodpfx Aot Hw Iiea Eoid weight of the machine ca. 5.500 kg

Condition: new, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Iodpfxsucw Rbo Aa Eeid The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: Iodpsxn Ifuefx Aa Esid 1st. XSV Brushes (12 rotating and oscillating brushes) 2nd XSV Brushes (12 rotating and oscillating brushes) 3rd Roller brush Feeding belt 1350 mm.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, ECKOLD SK 2911/HAE 500/2 Hydraulic Forming Machine - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 30 A - Connection: 8.1 kW Attention: The item must be collected between July 7th and 9th, 2026, on a date to be confirmed. Iiodpfjy Dcwyjx Aa Eod FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: new, functionality: fully functional, Year of construction: 2009, overall weight: 35 kg, total length: 400 mm, total width: 100 mm, total height: 2,000 mm, HEAVY-DUTY SHEET METAL SHEARS, 4/8R/200, VITTE GERMANY. Iodpfx Ajzl D Nqea Eeid

Condition: new, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 3/6R/200, overall weight: 25 kg, total length: 400 mm, total width: 100 mm, total height: 400 mm, HEAVY-DUTY MECHANICAL SHEET METAL SHEAR VITTE GERMANY 3/6R/200 Iiodpozl D E Ejfx Aa Eod

Condition: used, 3 transmitter elements (clear width approx. 400 mm) 4,000 mm long, 1,700 mm high Warehouse location: Iedpeymp Rwjfx Aa Eeid

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade Ijdpfezl A Raex Aa Eeid - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, degree of automation: automatic, Description: For sale is a state-of-the-art JORNS JDB-200G double bending machine with extensive special equipment. The machine was developed for the economical production of complex edge profiles and enables the automatic bending of sheet metal parts without manually turning the workpiece. This reduces setup times and significantly increases productivity. The combination of the powerful CP300Twin control, Dynamic Positioning (DP), servo-hydraulic DSP drive, RH hydraulic system, automatic back gauge, and integrated SL3 shear makes this system the ideal solution for demanding applications in industrial sheet metal processing. The JDB series impresses with its high precision, short cycle times, and intuitive graphical programming. Automatic clamping fingers, servo technology, and the generous "G" tool geometry enable even complex bending profiles with maximum efficiency. Technical data: Manufacturer: JORNS Model: JDB-200G-RH-DP-SL3-1250-CP300Twin-6.4-DSP Machine type: CNC double bending machine Control: JORNS CP300 Twin Tool geometry: G geometry Material thickness adjustment: RH hydraulic Dynamic Positioning (DP) Double servo-hydraulic system (DSP) Integrated shear SL3 Automatic clamping fingers Automatic material feed Automatic loading and unloading system CNC-controlled back gauge High positioning and repeat accuracy Equipment: CP300 Twin graphic control RH hydraulic material thickness adjustment DP Dynamic Positioning DSP double servo pump system SL3 high-speed shear Automatic material feed Automatic clamping fingers Vacuum gripper system Servo-driven axes Hydraulic cooling LED operating status display Extensive safety equipment Application areas: Facade construction Roof and wall profiles Ventilation and air conditioning technology Metal and hall construction Housing and switch cabinet construction Sheet metal processing Industrial series production Condition: Used Technically functional Inspection under power is possible by appointment. Maintenance and service documents available upon request. Iedpfxozl Anlj Aa Esid Scope of delivery: JORNS JDB-200G double bending machine CP300 Twin control Existing tools Documentation Accessories as per inspection Advantages at a glance: Highest productivity thanks to double bending technology No need to turn the workpieces Very short setup times Graphical CNC programming Precise production of complex profiles Automated material flow Robust Swiss industrial quality Ideal for series and small series production Location: Riesa, Germany Inspection / Loading: An inspection of the machine under power is possible at any time by prior appointment. If desired, we can assist with: Dismantling Loading Transport organization within Germany and Europe Commissioning by arrangement Errors, changes and prior sale reserved.

Condition: new, Year of construction: 2026, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Your description for this machine will be as follows: Iijdpey Hi Nnefx Aa Eed "We offer a brand new 2026 model Ayba longitudinal and cross-cutting machine." If you have any questions or require further information, you can send us a message or call us.

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm Iedpfezly Rqsx Aa Eoid number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Ijdpfjzly Nmsx Aa Ejid Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, functionality: fully functional, Year of construction: 1992, Hand-operated swiveling bending machine Iiedpfozkki Isx Aa Esd Manufacturer: FASTI, Model: 205, 1020 x 2mm Year of manufacture: 1992 Technical data Manufacturer: Fasti Model: 205 Year of manufacture: 1992 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: 520 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails: Goosefoot die H 130 mm, segmented Bending rail 18 mm Sharp-edged rails: 30°, 45° Continuous goosefoot rail 3 different radius rails All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2002, controller manufacturer: RAS, controller model: Touch&More System 6000, working width: 3,200 mm, sheet thickness (max.): 2 mm, back gauge: 1,550 mm, input voltage: 400 V, year of last overhaul: 2025, Equipment: CE marking, emergency stop, foot remote control, We are offering this used RAS TurboBend plus 62.30 swiveling bending machine, manufactured in 2002, for sale. RAS turboBend plus 62.30 Year of manufacture: 2002 Bending length max. 3200 Back gauge depth max. 1550 Sheet thickness max. 2.0 Touch&More System 6000 (refurbished in 2025) USB stick, no longer with a 3.5-inch drive It functions perfectly. All maintenance has been carried out by us. Iedszlyx Iepfx Aa Eoid If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2015, operating hours: 2,265 h, functionality: fully functional, machine/vehicle number: SN004805, Manufacturer: LISSMAC Maschinenbau GmbH Model: SBM-L 1500 G1S2 2,265 operating hours Machine type: Deburring and edge rounding machine Working width: 1,500 mm / 2 driven tables Processing: Both sides in a single pass Year of manufacture: 2015 Without dust extraction The machine is being sold due to a plant upgrade. Immediately available Iijdozltu Njpfx Aa Esd Inspection possible at any time by arrangement.

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. Iodpfx Ajv Tnfisa Esid The machine is available for inspection and testing; it is live. Please contact us with any questions.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, BAZ and extrusion die system for manufacturing car sill components, consisting of: *Machining equipment: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2 coolant treatment units *Assembly of subassemblies (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for Robot 1 - Marking station - Robot 2 KUKA KR120 R3500 - Gripper for Robot 2 - Interface between robot and machining center - Cleaning unit for components - Assembly machine with 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for Robot 5 - Pallet station - Safety enclosure - Electrical control and integration Iodpfxezi Efue Aa Ejid Further information available upon request.

Condition: excellent (used), functionality: fully functional, actuation type: electric, working width: 10,000 mm, bending angle (max.): 140 °, overall weight: 5,000 kg, total length: 11,000 mm, input voltage: 400 V, input current: 32 A, Equipment: emergency stop, foot remote control, FOR SALE: Jorns Norma Line 125 SM CNC 400-10 – Heavy-Duty 10-Meter Press Brake with Sheet Cutter Are you looking to upgrade your sheet metal workshop with serious capacity? Up for sale is a rare, high-capacity, Swiss-made Jorns Norma Line 125 SM CNC bending machine, boasting an impressive 10-meter bending length. In the sheet metal industry, Jorns is widely recognized as the gold standard for durability and precision. This unit was manufactured in 1989but has been operative for which is exceptionally low for a commercial machine of this caliber. It has primarily been used for light work with galvanized steel, meaning the mechanical components are in great condition. Additionally, the machine comes equipped with an integrated sheet cutting knife for quick, clean, and straight cuts directly on the machine. Key Highlights: Massive 10-Meter Bending Length – Allows you to bend long roof, ridge, and facade flashings in a single piece without joints. Exceptionally Low Hours – With only 6,000 operational hours, this machine has plenty of life left for decades to come. Iiedpfozlkq Iex Aa Eed Premium Swiss Engineering –Extremely rigid and precise frame with a solid machine weight --- ### Technical Specifications: Brand: Jorns (Switzerland) Model:Norma Line 125 SM CNC 400-10 Year of Manufacture: 1989 Max. Bending Angle: 140° Bending Length:10,020 mm Dimensions & Weight: Machine Depth:1,700 mm Machine Height:1,870 mm Machine Weight: Approx 6000 kg Additional Equipment: Programmable Jorns CNC 400 Control unit Integrated rotary knife for sheet metal cutting Foot pedal control

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SN075360, 12-month warranty Iiodpfszldumox Aa Ejd

Condition: new, Year of construction: 2024, functionality: fully functional, 12 months warranty Isdpfx Aaezldr Ee Esid

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 Iiodpfx Aaozcuzye Eod equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: new, FSCUT Ethercat CNC Control System DELTA Ethercat Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head Laser source 6kW HanLi Chiller Iiedpfx Ajnr Hcwoa Esd Gross weight around 9.5ton Optional: bevel cutting for sheet

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set Isdpfx Ajudb R Ioa Eoid R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: good (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 3170, control type: manual, actuation type: electric, working width: 3,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, Only aluminum sheets, predominantly with a thickness of 2 mm, were used. Iedezk Ihnjpfx Aa Esid The machine was used infrequently.