Used Sheet Jogger for sale (8,648)

Condition: good (used), Year of construction: 1990, total width: 80 mm, total length: 80 mm, total height: 200 mm, overall weight: 9 kg, Eckold tool ECKOLD - FWA 802/3T MACH-ID 9696 Make: ECKOLD Type: FWA 802/3T YOP: 1990 Length:80mm Width:80mm Height:200mm Ndedpfxez Eqkxs Af Ssb Weight:9kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, JORNS NORMA - LINE 125 SW | Swivel bending machine | 6.4 meters working length, 1.25 mm bending capacity. Ndsdpjznc Ahofx Af Sjb

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process. Ndsdpfx Afszzlqne Sob

Condition: used, weight max. 60 t Nsdsz Euwcopfx Af Sedb workpiece diameter 200 - 5000 mm drum diameter 250 x 100 mm total power requirement 2 x 3,0 kW weight of the machine ca. 3,0 t Dimensions (LxWxH) 3,5 x 2,0 x 0,6 m

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Nedpfx Afsw Dd Hps Sjdb Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Nodpfxswz Ukys Af Sedb

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, CP 2000: Touch Screen Console Njdpfsz Er Ncox Af Sedb Automatic Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer Heidelberg Autoplate (Automatic Plate Changing System) Alcolor Dampening Technotrans Cooling Device Low-Pile-Delivery Impression Account: 138 Mio.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2030.05.356, BIRLIK BK 1.25 X 63 – Heavy-Duty Swaging & Beading Machine A professional, motorized swaging and beading machine designed for forming, flanging, and reinforcing sheet metal components. Manufactured by Birlik Makina, this robust system is an essential tool for ventilation duct production. This machine comes as a complete production package, including a comprehensive set of various forming and profiling rolls as shown in the picture. Specifications Njdjzbh U Ropfx Af Ssdb • Manufacturer: BIRLIK Makina (Turkey) • Model / Typ: BK 1.25 X 63 • Year of Manufacture: 2005 • Serial No.: 2030.05.356 • Application: Beading, flanging, swaging, and crimping of round ducts, tubes, and fittings. • Shaft Center Distance: 63 mm • Maximum Sheet Thickness: ~1.25 mm (for standard galvanized steel) Key Features & Components • Extensive Tooling Package Included: Sold with a wide variety of interchangeable roll sets, allowing the operator to perform multiple operations including standard beading, crimping, flanging, and specialized profiling. • Motorized Operation: Equipped with a powerful motor and foot pedal control for hands-free operation, ensuring precise material feeding and high productivity. • Adjustable Bottom Shaft: Features easy alignment and depth adjustment of the rollers to achieve the exact profile depth and sharpness required. • Robust Industrial Build: Rigid cast iron frame and induction-hardened shaft components ensure stability and long-term geometric accuracy under continuous workshop loads. • Forward / Reverse Function: Convenient control system for versatile material processing directions. Condition & Availability • Status: Fully operational, well-maintained, and in good working condition. • Ready for delivery

Condition: like new (used), Radius tools from UKB Adapter 10.115 Radius diameter: 54 mm 3 x 835 mm Lower die 20.273 Includes PU cushions 3 x 835 mm Ndjdpfx Afoz Ery Io Sjb Complete set, new condition: €4,794

Condition: reconditioned (used), Year of construction: 1999, Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for unloading and palletising counted sheet. Paper is counted by Bizerba paper scale, then straightened and smoothened by jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet, then left standing. Equipment may also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine. Ndodpfshfhtkex Af Seb

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_202500011, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Nodpfx Afoz Eii Tj Ssdb Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: used, Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, repeat accuracy: 0.2 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.2 mm, workpiece weight (max.): 1,000 kg, sheet thickness aluminum (max.): 120 mm, total length: 2,000 mm, total width: 3,000 mm, product height (max.): 120 mm, Equipment: safety light barrier, BIESSE INTERMAC PRIMUS 322 – CNC WATERJET CUTTING MACHINE For sale is a Biesse Intermac Primus 322 CNC waterjet cutting machine, manufactured in 2022. The machine has only approximately 4,500 operating hours and is equipped with a BFT 37 kW high-pressure pump. The machine is fully functional, in very good and well-maintained condition, and is immediately available. Technical Data Njdez Drcyjpfx Af Ssdb * Manufacturer: Biesse Intermac * Model: Primus 322 * Year of manufacture: 2022 * Operating hours: approx. 4,500 hours * Configuration: 3-axis * Working area: 3,210 × 2,000 mm * Z-axis travel: 250 mm * High-pressure pump: BFT * Pump power: 37 kW * Maximum pressure: up to 4,200 bar * Max. X/Y speed: 45 m/min * Max. table load: 1,000 kg/m² * Condition: Very good / fully functional * Location: Croatia, EU * Availability: Immediately available Highlights * Year 2022 * Only approx. 4,500 operating hours * BFT 37 kW high-pressure pump * 3-axis configuration * Working area 3,210 × 2,000 mm * Very well maintained * Fully functional * Immediately available * Inspection and demonstration under power possible by appointment

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Njdsz Exv Nspfx Af Sjdb Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: good (used), Year of construction: 2000, input voltage: 380 V, type of input current: three-phase, pressing force: 125 t, stroke length: 400 mm, total length: 4,000 mm, total width: 2,175 mm, total height: 3,500 mm, overall weight: 15,000 kg, Brand: Amada - Schiavi Model: NMP 125/3 Serial number: 005-8250 Year: 2000 Weight: 15,000 kg Motor: 9 kW Axes: Y1, Y2, X, R, Z1, Z2, Z3 CNC: Amada TASK 84 Capacity: 125 tons Stroke: 400 mm Gooseneck length: 410 mm Rapid traverse speed: 200 mm/s Working speed: 1-10 mm/s Return speed: 180 mm/s Distance between uprights: 2700 mm Nodpfx Ajz Dvlljf Sjdb Dimensions: 4000 x 2175 x 3500 (h) mm *Supplied with a NEW 60x60mm multi-V die (16, 22, 32, 50 mm) at 3100 mm. Supplied with a NEW Promecam 85º h135 r0.8mm punch at 3100 mm. Supplied with a new side safety laser.

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Nsdpfoz Ak Dijx Af Ssdb Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 20210330-2, control type: CNC control, pipe diameter (max.): 63 mm, pipe length (max.): 2,600 mm, bending angle (max.): 190 °, bending radius (max.): 350 mm, bending radius (min.): 25 mm, overall weight: 3,000 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 1,350 mm, CNC 63CNC AUTOMATIC MANDREL BENDING MACHINE – FOR TUBES AND PROFILES For sale: CNC 63CNC automatic mandrel bending machine, designed for precise bending of tubes and profiles. The machine is equipped with CNC/PLC control with a touchscreen and the ability to save bending programs. TECHNICAL DATA: -Maximum diameter / material dimension: Ø63 × 4 mm -Bending radius: 25–350 mm -Bending angle range: 0–190° Nodpfx Afezy Rgxo Sodb -Effective length on the mandrel: 2600 mm -Motor power: 7.5 kW -Maximum pressure: 160 kg/cm² -Machine dimensions: 5000 × 1200 × 1350 mm -Weight: approx. 3000 kg EQUIPMENT AND FUNCTIONS: -PLC control with touchscreen -Automatic and manual mode -Diagnostic system -Full hydraulic clamping -Up to 100 programs, each with up to 20 bending operations -Independently programmable speeds of axes Y, B, and C -Programmable material springback compensation -Automatic release of the tube before final bending -Cycle start via foot pedal -Air cooling The machine enables repeatable, precise bending and is designed for production applications where efficiency and process repeatability are essential. Transportation is the buyer's responsibility.

Condition: used, Used Press Brakes and Shears available – various capacities and working lengths Photo 1 – Press brake GEKO – 100 ton – 3050 mm Photo 2 – Synchronized press brake VICLA – 125 ton – 3100 mm Photo 3 – Synchronized press brake WARCOM FUTURA – 200 ton – 4550 mm Photo 4 – Press brake GADE – 50 ton – 4050 mm Photo 5 – Press brake CML – 100 ton – 4100 mm Photo 6 – Shear GEKO – 3050 x 6 mm Photo 7 – Shear VICLA – 3050 x 8 mm Photo 8 – Shear BL – 3050 x 5/7 mm Photo 9 – Shear AMADA – 4000 x 8 mm Photo 10 – Shear OMAG – 2050 x 4 mm Nodpfxsyabn Ue Af Sjdb

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Loading table for sheets of 3000 x 1500. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Ndjdpfx Aezdc Iqof Ssb Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Always used for thin sheet metal, max. 2 mm. A tapping head TU6 is included, but it displays an error message. Must be sold urgently due to a lack of space.

Condition: used, Year of construction: 1994, Max. Cutting length: 3040 mm Max. sheet thickness: 6 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Hydraulic shear angle adjustment cutting length limitation Cutting edge lighting knife sharpened Ndodpjz Et Slsfx Af Ssb Weight approx. 6500 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Dimensions: 2050 x 6 / 4 mm, adjustable cutting angle and cutting gap, rear light barrier. Nsdpez Dbtnjfx Af Ssdb

Condition: used, functionality: fully functional, 3 plate shears with a rear light barrier: Nedpfx Aoz Eun Uef Sjdb - Huttenlocher, capacity 1040 x 3.5 mm - FASTI, capacity 2540 x 3.25 mm - MENGELE, capacity 2040 x 6 mm

Condition: used, Year of construction: 1999, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 180 mm, table width: 4,000 mm, overall weight: 16,000 kg, We offer this used Amada HFBO press brake, manufactured in 1999. Date of manufacture: 01.10.1999 Serial number: HFBO22040H991018 Bending length: 4,000 mm Maximum force: 2200 kN Maximum stroke: 180 mm Voltage: 400/415 V Njdpfx Afezzknro Ssdb Frequency: 50 Hz Installed power: 17 kW Rated current: 35 A Number of phases: 3 Machine weight: 16,000 kg Machine stopping time: 80 ms Machine stopping distance: 9 mm If you have any questions or require further information, please send a message or contact us by phone.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. Ndodszl A Raopfx Af Ssb The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Max bending length: 1,600 mm Distance between uprights: 1,600 mm X-axis travel: 600 mm Max stroke: 290 mm Controlled axes: X, Y, R Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution Nsdpfx Aeylhkysf Sodb The machine is fully operational and in good overall condition.

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 10,246 h, machine/vehicle number: 5022/03, working width: 3,000 mm, 1995 COLLY folding machine in working order. DELEM DA20 numerical control Power 125T for 3m Ndsdpfxju E Eyro Af Sob