Used Shaft Factory for sale (7,689)

Condition: new, Year of construction: 2026, functionality: fully functional, RSS 2-shaft shredder, 800 series, 2 x 7.5 kW Rotor length: 800 Blade thickness: 20 mm The machine can be customized to your specifications, including the control panel. Delivery time upon consultation. Infeed and outfeed conveyor belts are available as an option. This shredder is ideally suited for destroying, for example, hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. Upon consultation, we can also deliver and install the machines. Kjdpfx Anjw Ry Alsuonc Please provide your name, company name, and a valid telephone number so we can respond quickly.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. Knedpjytdkfjfx Anusc 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Discharge conveyor overhauled, magnet unit replaced. Tools 85%. Service newly performed. New paintwork. Immediately ready for use.

Year of construction: 2001, condition: excellent (used), functionality: limited functionality, Used Paragon Cox H55 hydraulic lifting and driving vacuum double shaft mixer, disperser for sale The contact parts of the mixer are made of stainless steel With complete hydraulic system Without control cabinet. Manufacturer Cox Paragon Year of manufacture 2001. The contact parts of the mixer are made of stainless steel Knedpfxozzknlj Anuoc 1 pc 800mm dia 3 blade adjustable butterfly mixer max 400rpm SAI GM4-1000 D40J 100kw hydraulic piston motor 1 pc high speed dispersing mixing head ca: 1000rpm Sauer-Danfoss MMF046C 45kw axial piston hydraulic motor Hydraulic power unit main motor 55 kw 1440rpm 400/660volt 2 pcs 480 liter mixing vessel + 4 pcs stainless dosing rings + hydraulic press head. The mixer can be raised hydraulically by approx. 120 cm

Year of construction: 2001, condition: used, functionality: fully functional, Used Paragon Cox H20 vacuum twin-shaft mixer/disperser with hydraulic lift and drive for sale Product-contact parts made of stainless steel Complete with hydraulic system Control cabinet not included Manufacturer: Cox Paragon Year of manufacture: 2001 Product-contact parts made of stainless steel 1 x 3-blade adjustable butterfly mixer (6 mm thick), max. 400 rpm SAI GM2-300 D40J 50 kW hydraulic piston motor 1 x High-speed dispersing mixing head, approx. 1000 rpm Knedsz Eb R Aopfx Anujc Sauer-Danfoss MMF046C 45 kW axial piston hydraulic motor Hydraulic power unit main motor: 30 kW, 1465 rpm, 400/660 V 2 x 210-liter mixing vessels + hydraulic press head Mixer can be hydraulically lifted by approx. 100 cm

Condition: used, Year of construction: 1997, functionality: fully functional, Weima WLH 6S/37 wood chipper/shredder Rotor length: 800 mm Number of knives: 42 Rotor speed: approx. 300 rpm Kjdpfxozzvfvj Anuonc Rotor diameter: 368 mm Number of screens with 20 mm diameter holes Main motor power: 37 kW Technical documentation and CE certificate included Vibratory feeder with a length of 365 cm Year of manufacture: 1997

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final Knodpfx Aew S Iiienuoc - Only 980 operating hours

Condition: used, Year of construction: 2008, machine/vehicle number: 1395, number of blades: 138, input voltage: 400 V, FOR SALE – LINDNER MICROMAT 2200 – 132 kW – 2008 For sale: an industrial shredder, the Lindner Micromat 2200, from the reputable Austrian company Lindner Recyclingtech. This machine is designed for the industrial shredding and processing of plastics and other waste materials. Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 2200 Year of manufacture: 2008 Power: 132 kW Application: shredding plastics / recycling Kedjz Ay Dfepfx Anujnc Country of origin: Austria Machine condition The machine was used in an industrial setting. It is currently disconnected from the production line and prepared for sale. Due to its current condition, it is not possible to conduct an operational test or on-site machine test. Prior to purchase, there is an opportunity to inspect the equipment after scheduling an appointment. Interested parties are requested to contact us for further information, photos, and to arrange a viewing appointment.

Condition: ready for operation (used), Year of construction: 2013, Hommel Etamic Opticline C514 Waveform Measuring Instrument / Waveform Measuring Machine Year of manufacture: 2013 Measuring range, diameter: 0.2 - 140 mm Measuring range, length: 500 mm Workpiece diameter: 150 mm Workpiece length: 530 mm Workpiece weight: approx. 15 kg Resolution, diameter: 0.1 µm Resolution, length: 0.1 µm Resolution, rotation: 0.018° Accuracy, diameter: (2 + D/100) µm Accuracy, length: (5 + L/100) µm Repeatability, diameter: 0.5 µm Repeatability, length: 3 µm Measuring speed: 10–80 mm/s Measuring rotation: 1 rev/s Positioning speed: 200 mm/s Typical measuring time: 3–30 s Dimensions of measuring system: 780 × 875 × 1,420 mm Weight: 1,850 N ≈ 185 kg You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. Knodpezz H Rijfx Anuoc For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: refurbished (used), functionality: fully functional, Weiler Primus lathe with lead screw and drive spindle. Includes tailstock. The machine can be inspected while powered on prior to purchase. Knodpsz Nh Epofx Anujc Shipping is possible for an additional charge. VAT can be shown separately.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, Longitud de entrada // Intake length: 2200 mm Anchura de entrada // Intake width: 2000 mm Longitud de rotor // Rotor length: 2000 mm diam. rotor // rotor diam.: 495 mm n.º de cuchillas // n. of knives: 56 (60x60) velocidad del rotor // rotor speed: 125 rpm potencia motor // main motor power: 132 kW Kodei Elylspfx Anuenc voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 14000 kg * Máquina especialmente diseñada para la trituración de plásticos, los rodamientos del rotor están completamente aislados. * Máquina completamente reconstruida; 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Rotor de repuesto - Sujetador superior; ideal para la trituración de residuos voluminosos de baja densidad - Soporte de acero - Tolva de alimentación - Cuadro de control eléctrico - Planos de implantación disponibles, asi como plano de soporte de máquina y tolva de alimentación - Manual de instrucciones & esquemas eléctricos Includes: - Machine supplied with bridge breaker (upper feeder); suitable to shredd bulky waste with low density - Machine fully refurbished; 1 year guarantee or 2000h, whatever happens first - Machine specially designed for shredding of plastic waste. - Steel support - Infeed funnel - Electric control pannel - Dimmensional drawings available in Acad for the machine, funnel and steel support - Operation & maintennace mannuals available

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Knodpfxozhg Eye Anuec Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1000 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Knsdpfx Ajzt Intonuoc Note: The machine is in good working order. It was inspected and tested by us in 28816 Stuhr. The video can be found on our website or YouTube channel. Inspections are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty.

Condition: used, functionality: unexamined, input voltage: 380 V, The machine (or at least a part of it) is an old coffee pad recycling (CPR-30) machine (see appendix). Kjdpfx Aszvfxnenusnc This shredder and blade assembly was used to tear open paper coffee pads and then separate the pad from the coffee using a vibrating screen located underneath the machine. Perhaps this machine is also suitable for other materials. Price is per unit.

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18 Kodpfx Aozw Uilsnujnc

Condition: used, Four-side planer SCM P4F Specifications: - Condition: used - Manufacturer: SCM - Model: P4F - Working width: 180 mm - Working height: 120 mm - Machine connected power: 12.5 kW - Star-delta start - Cutterhead rotation: 6,000 rpm - Electric planing height adjustment - Manual planing width adjustment - Machine equipped with a set of heads - Infeed table length: 230 cm, width: 18.5 cm - 2 feed speeds (6 and 12 m/min) - Spring-loaded feed roller pressure - Sheet metal soundproofing enclosure - Original paintwork - Extraction socket: 4 x 120 mm - Weight: approx. 1,200 kg - Overall dimensions: 330 x 110 x 130 cm (L x W x H) Kjdpfx Aowzyfisnujnc - No. of machines available: 2 Additional information: - The photos show the actual condition of the item for sale

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard Kjdpjz Nd Itjfx Anujnc 18 kW

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, overall weight: 3,500 kg, rotor diameter: 420 mm, number of blades: 44, rotor length: 800 mm, power: 22 kW (29.91 HP), type of input current: three-phase, rotational speed (max.): 100 rpm, input voltage: 400 V, additional equipment features: Swan Neck Conveyor, Equipment: CE marking, The S-22 shredders is designed for optimal ease of maintenance and serviceability. It features easy access to all service points, including interchangeable screens and knives, allowing for quick and efficient replacements or adjustments. The machine is equipped with a hydraulic tipping hopper, which provides effortless access to the cutting chamber, making the removal of foreign objects both safe and straightforward. Additionally, the swing-out power pack design enhances accessibility, streamlining routine maintenance and minimizing downtime. • Rotatable knives for an extendable lifetime Knodpfxj Aa Anrs Anuec • Rotational speed adjusted to suit material • Compact and solid design • Low maintenance efforts and easy installations S-22 comes with swan neck conveyor designed to discharge shred into 1m3 bags. Option of 20mm, 30mm and 60mm screen size. APPLICATIONS • Plastics • Wood / Timber • Packaging • Cardboard

Condition: excellent (used), Year of construction: 2005, CATALOGUE NUMBER 7905 Technical data: - max cutting height 160mm - max element width 700mm - working width of the saw mandrel 600mm - mandrel diameter 70mm Ksdpfx Anszu R Ifouenc - max saw diameter 450mm - top: - pawls - 2 toothed feed shafts - pressure roller with metal sliding element - bottom: - sliding roller - pawls - toothed feed shaft - saw mandrel - smooth feed shaft - metal sliding roller - 6 feed speed settings - feed motor 0.9kW - main motor 45kW - overall dimensions L/W/H 1500x1350x2000mm - weight approximately 2695kg ADVANTAGES – made in Poland – robust construction – used machine, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Equipment, detailed description: see documents. Kodpfx Anozd Srdsusnc

Condition: excellent (used), We have the complete contents of a recently closed high care baby food factory for sale. Machinery available includes DC Norris cooking vessels with JetCook facility, 3 x Lagarde retort / autoclaves, Toyo Jidoki tear touch filling machine - twin lane model. Kodpfx Ajy H Rqaonuonc

Condition: excellent (used), Year of construction: 2004, CATALOGUE NUMBER 7880 Technical data: - max. cutting height 150mm - max. element width 500mm - working width of the saw blade shaft 400mm - shaft diameter 70mm - max. saw blade diameter 450mm - top: - anti-recoil devices - 2 toothed feed shafts, pneumatically pressed - bottom: - sliding roller - anti-recoil devices - 2 toothed feed shafts - saw blade shaft - 2 toothed feed shafts Kjdeztac Njpfx Anusnc - stepless feed speed adjustment via a frequency inverter - feed motor 3kW - main motor 55kW - overall dimensions L/W/H 2120x1600x1630mm - weight approximately 2750kg ADVANTAGES – Polish production – solid construction – used machine, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Knedpfxoxx Tfze Anusc Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: excellent (used), Stainless steel lump breaker, double shaft 2 electric motors, 380 volts, 7.5 kW feed opening: 1510 x 560 mm Kjdpfx Anszu Rrwsujnc

Year of construction: 1985, condition: good (used), machine/vehicle number: 108, Order No. 15256 Technical data: - Flexible shaft 1500 mm - 5 speeds Ksdok Ea Taspfx Anusnc - Belt sanding attachment - Power supply 380 V - Mobile base - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: 376, Item No. 10275 Ksdpfx Aek E Ey Donusnc Technical data: - Flexible shaft 1500 mm - Infinitely variable speed control from 1000 to 12000 rpm - Power supply 380 V - Mobile base frame - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg