Used Shaft Factory for sale (7,578)

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,7 / 4,5 kW inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 1.970 x 1.000 x 1.750 mm (open lid: H: 2.250 mm) infeed height : ± 1.450 mm Rbjdpfsyu I N Isx Ab Isw Suitable for loader with “Easy Connect” dimensions drum : (l x w x h) : ± 1.000 x 765 x 665 mm + Loader for eurobins

Condition: new, new ! all stainless steel variable speed microcontroller 2 mixing directions pneumatic lid inspection gantry safety lid 11kW CE-approved Rbsdoyu I Idspfx Ab Iow Suitable for loader with “Easy Connect” Easy clean overall dimensions (l x w x h) : 2.180 x 1.000 x 1.600 mm + Loader for eurobins

Condition: not inspected (used), Padeltherm shaft furnace Must be dismantled and collected by the buyer. Rbjdpfxsywt I No Ab Ijw

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Rbjdpfxjibzbhj Ab Ijw Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,3 / 4,4 kw inspection gantry safety lid CE-approved Redpfjyux Tqjx Ab Iebw Suitable for loader with “Easy Connect” overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) infeed height : ± 1.350 mm dimensions drum : (l x w x h) : ± 860 x 670 x 565 mm + Loader for eurobins

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Including control cabinet Rjdeyuvr Rjpfx Ab Ijbw

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 3398, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 200 mm, blade shaft diameter: 70 mm, Equipment: CE marking, SECOND-HAND 2 SHAFTS MULTIRIP SAW COSMEC MOD. SMB200 Rbodpfjywd Nkox Ab Iow - Max. Cutting height mm. 200 - Belt width mm. 400 - Adjustable feeding speed m/min 5/30 - Main motor KW 45 x 2 - Shaft diam. mm. 70 - CE rules - Year 2002

Condition: used, Year of construction: 1990, functionality: fully functional, type of input current: three-phase, power: 4 kW (5.44 HP), filling opening width: 780 mm, filling opening length: 570 mm, Shredder for sale suitable for various materials such as paper, PUR foam, or even wood. The machine is available immediately and can be inspected at our facility. Rsdpeyvzw Nefx Ab Iebw

Condition: used, Year of construction: 1994, functionality: fully functional, total width: 3,000 mm, power: 15 kW (20.39 HP), Moving floor (pull-type) with leveling roller (diameter 400 mm) and hydraulic unit. Conveyor capacity: 30 m³/h. Rsdpfsyvrb Eex Ab Iobw

Condition: excellent (used), CATALOGUE NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/reverse + inverter control - Maximum number of saw blades on the upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW Rbodpsx E Shwofx Ab Isw - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimension of the additional extension: 3700 x 520 x 950 mm - Extraction outlet diameter: 3 x 200 mm - 3 rows of pawls before the blades - 1 row of pawls after the blades - Dimensions (L/W/H): 6010 x 1500 x 2000 mm - Weight: approx. 1400 kg ADVANTAGES - Polish manufacture, WALTER brand - Additional 3000 mm track extension - DTR documentation – used machine, very good condition Net price: 37,900 PLN Net price: 9,020 EUR based on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. Rbsdpjytbzhsfx Ab Iew The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Year of construction: 2024, operating hours: 600 h, condition: like new (used), functionality: fully functional, Maximum height 160 mm / 6 5/16" Rsdpfxeyvhp Ss Ab Iebw Maximum width 700 mm / 27-1/2" Saw shafts are fixed. Hydraulic driven, knurled feed rollers are available. The top pressure roller is hydraulically adjustable. When the full speed range of the machine is used, up to 20 meters / 65 feet of cutting can be achieved per minute. TECHNICAL SPECIFICATIONS STANDARD METRIC LENGTH 10'-5" 320 CM WIDTH 7'-5" 230 CM HEIGHT 5'-2" 160 CM APPROXIMATE WEIGHT 8,600 lbs 3900 KG SAW SHAFT MOTORS 2 × 50 KW 2 X 37 KW SAW DIAMETER 11 13/16" 300 MM MINIMUM ENTRY LUMBER WIDTH MIN: 4 3/4" MIN: 120 MM MAXIMUM ENTRY LUMBER WIDTH MAX: 27 1/2" MAX: 700 MM MAXIMUM LUMBER CUTTING HEIGHT MAX: 6 1/4" MAX: 160 MM MIN. & MAX. EXIT LUMBER CUTTING WIDTH MIN: 1/2" MAX: 4 3/4" MIN: 15 MM MAX: 120 MM MIN. LUMBER LENGTH MIN: 3 FEET MIN: 90 CM MAX. FEED SPEED PER MINUTE MAX: 65 FEET / MINUTE MAX: 20 M/MIN

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication Rodpfx Ajxvb Sdob Isbw - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm Redpfoyr Rmqsx Ab Ijbw - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal pressure rollers - Pawls - Saw shaft - Smooth pressure roller - Pawls - Smooth pressure roller From below: - 2 metal, toothed feed rollers - Pawls - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter - Main motors 2x55 kW - Feed motor 4 kW - Hydraulic lifting of the top/bottom frame - Hydraulic adjustment of saw shafts - Pump motor 0.37 kW - Central lubrication - Suction connector diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight approx. 5500 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-blade saw, in very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2015-26004, power: 5.5 kW (7.48 HP), 1.3 Fine Crusher System FB 1000 DS1 Fine Crusher FB 1000 DS1 FG3 Drive power: 5.5 kW + 3.0 kW Design: 1 x cutting roller with thorn discs on top 1 x dosing roller with thorn discs on bottom Maximum processable plate thickness: approx. 100 mm Maximum processable density: 50 g/liter Clear width: 1000 mm Feed height from conveyor belt: 180 mm Additional protective cover on conveyor belt to be provided on-site Screw Discharge for Fine Crusher FB 1000 DS1: Rodpfxsyvfhwe Ab Ijbw Drive power: 0.75 kW Suction nozzle: NW 200 mm Includes maintenance flap with safety switch Blower VFM-42: Drive power: 4.0 kW Air volume flow: 2,200 m3/h Static pressure increase: 3,000 Pa Inlet suction side: diameter 200 mm Outlet pressure side: diameter 200 mm Connected pipeline: approx. 40-50 m NW200

Condition: ready for operation (used), Year of construction: 1981, power: 45 kW (61.18 HP), cutting height (max.): 200 mm, shaft diameter: 65 mm, chain width: 340 mm, Double-shaft multiblade saw Rsdpfx Aboyhlubo Ijbw Manufacturer: Raimann Model: KD Chain width: 340 mm Cutting height: 200 mm Saw motors: 2 x 45 kW Shaft diameter: 65 mm Electric height adjustment Transport chain with spikes Feed system modernised to stepless speed adjustment via potentiometer, approx. 0 to 40 m/min. Includes 3 saw sleeves with saw blades, some fitted with new saw blades.

Condition: new, Year of construction: 2026, operating hours: 5 h, Equipment: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels, and other materials. Rodpsyf Ni Djfx Ab Isbw The basic machine price includes (already contained): - Complete shaft set with bearing cassette of choice (for concrete, wood, biomass, mixed waste, others) - Sprinklers for dust reduction - Cross-belt permanent magnet (separates steel elements to the side) - Side discharge hopper under the magnet - Shaping bars

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotor diameter: 660 mm, For sale here is a large multi-edge rotor by Holzmaag, which can be used as a pre-shredder and mill. The unit offers tremendous power and features a highly sophisticated cutting mechanism, enabling it to efficiently reduce bulky or fibrous materials as well as large lumps or clumps without difficulty. The shredder is equipped with reverse automation and an automatic pusher control. Through manual adjustments via a touchscreen control panel, the machine can be finely tuned for almost any material. It is capable of shredding paper, aluminum, all types of wood, plastics, or copper coils. The system is being sold complete with control cabinet and external touchscreen panel, so you can start shredding immediately. A 40mm screen basket is currently installed. The machine is still in operation and can be demonstrated on site upon request. Technical data: Throughput: depending on input material, up to 8,000 kg/h (8 tons) Hydraulic drive: 200 kW Discharge screw: 3 kW Rotor width: 1677 mm Rotor diameter: 660 mm Number of edges: 30 pcs. Number of rotor knives: 90 pcs. Knife size: 80x80x80 mm Number of main knives: 2x 5 pcs. Drawer stroke: 1620 mm Rjdpsxamdmsfx Ab Ijbw -Screen basket quick-change system (hydraulically tiltable) Don't hesitate to contact us with any questions. This machine is part of our own inventory; we are not machinery dealers.

Condition: like new (used), Year of construction: 2022, We offer this Hammel VB 450 DK twin-shaft shredder, year of manufacture 2022, in as-new condition. Brand: Hammel Model: VB 450 DK Year of manufacture: 2022 Condition: as new Rjdpfx Abjyc Hdyo Iebw Type: twin-shaft shredder If you have any questions or require further information, please do not hesitate to send us a message or call us. Price negotiable.

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003547 - Manufacturer code: 3-008-23-1410 - Condition: As new (display item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, contact us. 4KG 46X39X27 Rjdpfxjyrn I Eo Ab Iobw

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH twin-shaft concrete mixers are industrial mixing systems that combine high efficiency and durability. Thanks to their robust chassis structure, powerful twin-shaft mixing mechanism, and optimized paddle arrangement, they homogenously blend all aggregate, water, and cement mixtures. This allows for the production of high-strength concrete with a low water/cement ratio while minimizing mixing time. The mixer's spiral mixing system directs aggregates towards the center, ensuring complete uniformity and enabling the production of concrete of consistent quality in every batch. Its twin-shaft design maintains fluidity even in highly viscous mixtures, delivering superior performance in heavy-duty applications such as precast, block, and dam concrete. All models are equipped with modern safety and maintenance features, including an automatic lubrication system, maintenance covers with safety sensors, and a hydraulic discharge cover. Twin-Shaft Concrete Mixer Technical Specifications MODEL NO: CTS-1 Loading Volume: 1,500 liters Fresh Concrete Volume: 1,250 liters Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 15 mm Ni Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-2 Loading Capacity: 3,000 liters Fresh Concrete Volume: 2,500 liters Redpfx Aoxpi Utjb Iebw Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-3 Loading Volume: 4,500 liters Fresh Concrete Volume: 3,750 liters Compacted Concrete Volume: 3,000 liters Engine Power: 2 x 55 kW Side Body Wear Plates: 20 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-4 Loading Volume: 6,000 liters Fresh Concrete Volume: 5,000 liters Compacted Concrete Volume: 4,000 liters Engine Power: 2 x 75 kW Side Body Wear Plates: 25 mm Ni-Hard Main Body Wear Plates: 25 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-5 Loading Volume: 7,500 liters Fresh Concrete Volume: 6,250 liters Compacted Concrete Volume: 5,000 liters Engine Power: 2 x 90 kW Side Body Wear Plates: 25 mm Ni Hard Main Body Wear Plates: 30 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available

Condition: new, Year of construction: 2026, functionality: fully functional, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Redsxpvgpopfx Ab Iobw Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Information: The prices listed in the advertisement are shared based on current information. However, due to changes in market conditions and supply processes, our prices may vary from time to time. Therefore, we recommend requesting a quote from us for accurate pricing information.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH single-shaft concrete mixers are professional concrete production solutions that combine high efficiency and durability. Designed to achieve homogeneous mixtures, these mixers deliver long-lasting performance even under intensive working conditions. Thanks to their robust body structure, wear-resistant inner linings, and powerful mixing arms, high-strength concrete production can be easily achieved. The automatic lubrication system minimizes maintenance requirements by ensuring bearings are optimally lubricated during continuous operation. The mechanical system delivers vibration-free and stable operation by transferring power to the main shaft via a heavy-duty electric motor and gearbox. Ni-Hard mixing equipment provides superior protection against wear during long-term use, while replaceable liner plates reduce maintenance time. The maintenance cover with safety sensor and emergency stop button, featured on all models, maximizes operator safety. Single Shaft Concrete Mixer Technical Specifications MODEL: CSS - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Side Body Wear Plates: 10 mm Hardox 450 Main Body Wear Plates: 15 mm Ni-Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL: CSS - 1 Loading Capacity: 1,500 liters Fresh Concrete Volume: 1,250 liters Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox 450 Main Body Wear Plates: 15 mm Ni-Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL: CSS - 2 Loading Capacity: 3,000 liters Fresh Concrete Capacity: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox 450 Main Body Wear Plates: 20 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available Rbedoxpi U Hjpfx Ab Iew Why Choose CONSTMACH Single-Shaft Concrete Mixers? CONSTMACH prioritizes quality and safety in production, offering maximum efficiency to users. Single-shaft concrete mixers operate smoothly for years thanks to their robust construction and easy maintenance. With high mixing performance, energy efficiency, and safety features, they can be used safely in any concrete production facility. At CONSTMACH, we offer our customers not just a machine, but a long-term investment with our mixers manufactured to international standards. If you are looking for quality, durability, and after-sales support all in one place, CONSTMACH is the right choice.

Condition: new, functionality: fully functional, power: 170 kW (231.14 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH V-70 mobile vertical shaft impact crusher, also known as the mobile sand making machine, is a high-efficiency mobile crushing and screening plant specifically designed for the production of high-quality fine aggregate. It delivers superior performance, particularly in the production of perfectly cubic sand with a grain size of 0-5 mm. Thanks to its advanced engineering, durable components, and long-lasting design, it offers maximum efficiency in different rock types of varying hardness, such as granite, basalt, dolomite, gabbro, and limestone. The V-70 model can directly process natural stones up to 35 mm in size, as well as materials obtained from primary or secondary crushing processes. With a production capacity ranging from 100 to 150 tons per hour, it can simultaneously produce 0-5 mm sand and three different aggregate fractions. Thanks to its user-friendly hydraulic-mounted mobile chassis, the plant is ready for operation in just a few hours at the installation site. The automation system is equipped with SIEMENS and SCHNEIDER electronic components, allowing all operations to be easily managed from a single tablet. Thanks to its compact design, the V-70 complies with international road transport standards and can be quickly transported to different construction sites using a king-pin-connected tractor. The system can also be equipped with an optional diesel generator, allowing for independent operation in areas where energy is needed. Rbjdpfexpxcyex Ab Isw V-70 Mobile Vertical Shaft Crusher Technical Specifications Production Capacity: 100-150 tph Maximum Feed Size: 35 mm Feed Height: 4.5 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 170 kW Electric Generator Requirement: 400 kVA Plant Weight: 32 tons Plant Dimensions: 17.8 (L) x 3.35 (W) x 4.3 (H) meters Chassis Type: Single chassis with wheels equipped with hydraulic legs Why Choose the V-70 Mobile Vertical Shaft Impact Crusher? CONSTMACH V-70 offers maximum efficiency, low maintenance costs, and superior quality in rock crushing and sand production. Its compact design makes it easy to transport, and its automation system requires minimal operator intervention. Its long-lasting components, high-performance VSI crusher system, and energy efficiency ensure the highest return on your investment. Manufactured with the CONSTMACH guarantee, the V-70 stands out in the industry with its durability, performance, and after-sales technical support. If you are looking for a reliable, fast, and economical solution for quality sand production, the V-70 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 390 kW (530.25 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH V-80 mobile vertical shaft impact crusher is a fully equipped mobile sand production plant specially designed for producing high-quality fine aggregate and cubic-shaped sand. This plant delivers superior performance in 0–5 mm particle sizes thanks to the VSI 800 CR vertical shaft impact crusher technology developed with advanced engineering solutions. Its compact design, easy transportability, and high efficiency deliver excellent results, especially when processing rocks of varying hardness, such as granite, basalt, dolomite, gabbro, and limestone. The V-80 can be fed with natural stones up to 40 mm in size after primary or secondary crushing. The plant provides a production capacity of 150 to 200 tons per hour, depending on the hardness of the stone. During production, three different fractions can be obtained simultaneously, in addition to material smaller than 5 mm. The hydraulic foot system, short assembly time, and PLC-based automation structure offer maximum ease of use for the operator. Furthermore, it guarantees long-lasting and reliable operation with Siemens – Schneider brand electronic components. V-80 Mobile Vertical Shaft Crusher Technical Specifications Production Capacity: 150-200 tph Maximum Feed Size: 40 mm Feed Height: 4.5 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 390 kW Electric Generator Requirement: 700 kVA Plant Weight: 40 tons Plant Dimensions: 18.8 (L) x 3.65 (W) x 4.4 (H) meters Chassis Type: Single chassis with wheels, equipped with hydraulic legs Why Choose the V-80 Mobile Vertical Shaft Impact Crusher? Rodpjxpxdkefx Ab Iebw At CONSTMACH, we offer our customers maximum efficiency, low maintenance costs, and quick installation advantages in rock crushing and screening processes. The V-80 model provides flexibility and operational ease in the field with both its high production capacity and mobile design. Its compact chassis, which can be transported with just a tractor, allows for quick transitions between different construction sites. Moreover, it guarantees uninterrupted production in all conditions with its dust reduction system, remote control support, and optional diesel generator integration. With its durability, energy efficiency, and world-class engineering quality, the V-80 has become synonymous with reliability and performance in sand production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.