Single shaft shredder

LINDNER MICROMAT 2200

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Bwjdpfx Akoq Nmw Ienjw

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Bwjdpfxjrp E Nne Aknjw

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Bwedpfowkilwox Aknsw Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Bjdoua Tbwspfx Aknoww Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, - Motor power: 9 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 35 tons - Splitting table: straight design - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight: approx. 4 tons - Color: RAL 5012 – light blue - Hand protection guard in the area of the control panel and on the opposite side Bwsdpfx Aegl Ac Seknew - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request.

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Machine is without gearbox. Bwedpfxjyt Iawe Aknjw

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP - Fill opening dimensions: 1200x700 mm - Rotor: 4 shafts and 40 stars Bedpfx Akoy I Uwasnsww - 950-1050 rpm - Throughput: 4-6 t/h - incl. new spare rotor & stars - completely overhauled & modernised

Condition: good (used), Manufacturer: Takraf / Zemag Type: ZWB 630 x 800 -1 Bjdpopxn D Isfx Aknjww Roll Dia.: 630mm Roll Width: 800mm Included frame and electrical motors.

Condition: new, Shredding Shafts for Hammel VB 950, Arjes VZ 950, Lindner U95, Pronar MRW 2.10.10, Olnova 95DK Available in all configurations with side combs and breaker bars: - 6-8-8 - 8-8-8 - 6-10-10 - 8-10-10 - 10-10-10 - 12-10-10 PROTECHNIKA is a company with a 21-year history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and our proprietary production technology, we have minimized production times while ensuring consistently high quality. Cutting shafts are a serial product, which allows us to collaborate with machine manufacturers as an OEM supplier. What sets PROTECHNIKA apart from the competition? It’s simple! - Certified 3.1 materials - TUV SUD Rheinland certified quality - ISO 9001 Bedpfx Ajx Hhq Rsknoww - Automated welding process / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department able to meet all customer requirements - Our own Research and Development Center Customer relations are of paramount importance to us, as their satisfaction is our greatest success!

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection Bwedpfx Akeuct Upjnow - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A