Used Sectional Door for sale (12,320)

Condition: used, functionality: fully functional, Equipment: foot remote control, We are selling a well-maintained profile steel shear/punching machine, Peddinghaus Type 210 AD/13, from our workshop. Integrated functions: Hole punch Bar steel shear Profile steel shear Flat steel shear Notching device The machine thus combines several processing steps in a compact unit and is ideally suited for flexible use in steel and metal construction. Condition: The Peddinghaus is in perfect working order and is ready for immediate use. Accessories: Cjdeziz Ewopfx Ailorh Various tools included Foot pedal available Important note: Due to the machine's high weight, shipping is unfortunately very difficult or only possible with significant logistical effort. We therefore recommend picking it up. Inspection: The machine can be inspected on-site at any time and tested during a trial run – this way, you can convince yourself of its functionality. We are available to answer any questions and provide further details.

Condition: good (used), Year of construction: 2007, Gebruikte pons knipmachine van Peddinghaus Cjdezul Adspfx Ailerh Type Peddimaster 110/170 Capaciteit ponsen 110ton Capaciteit knippen 170ton Inclusief zij aanslag en diverse gereedschappen

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Codpfxjzzkwmo Ailerh Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Cedpsz Ahanefx Ailerh Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: used, machine/vehicle number: 007901, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 5: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 6: Single Edgebanders FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Codjzwmbaepfx Ailorh Position 7: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE

Condition: good (used), 6600 mm Rexroth conveyor system Conveyor system with its own drive for transporting workpieces in a longitudinal direction or for lateral transport of the workpiece carrier between parallel conveyor systems in conjunction with a lifting-lateral unit to transfer from a longitudinal to a lateral line and vice versa. Codpfxjxzgg Ds Ailjrh Manufacturer: Bosch Rexroth Voltage: 3 x 400 V 50 Hz (16 A) Control voltage: 24 VDC Conveyor medium: Toothed belt Belt section: 6600 x 500 mm Lifting-lateral unit: 500 x 430 mm Belt height: 990 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm Cjdpfx Aju Icmhoiljrh -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Cedpfev H E Aljx Ailsrh

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1700 x 950 x 1900 m Crodpfx Aey Hxq Ieilsh

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm • Cutting of L-shaped profiles at 90º: 120x120x10mm Crsdpozg Dxbefx Aileh • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm • Bending: 200x12mm • Motor: 9KW • Net weight: 2500Kg

Condition: excellent (used), empty load weight: 5,260 kg, maximum load weight: 12,740 kg, overall weight: 18,000 kg, first registration: 04/2014, loading space length: 6,950 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 44.81 m³, total length: 7,280 mm, total width: 2,600 mm, total height: 3,900 mm, suspension: air, fuel type: diesel, fuel: diesel, Equipment: ABS, EBS, Key Features Internal Reference: 26389M Chassis Number: AH1814870814367 Vehicle Model: AH18 Vehicle Make: FABAG Product Category: Box Van Condition: Used Date of First Registration: 04/30/2014 Last Inspection Date: 04/10/2025 Fuel Type: Diesel Overall Vehicle Condition: Very good Suspension: Air-Air Hydraulic System: None Cab Vehicle Equipment: ABS, EBS Axles & Tires Axle 1: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Axle 2: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 18000 Payload: 12740 Unladen Weight: 5260 Vehicle Height: 3900 Vehicle Length: 7280 Vehicle Width: 2600 Body Body Manufacturer: FABAG Body Model: Climate-controlled Box Van Body Internal Dimensions (L x W x H): 6950x2480x2600 Body Manufacturing Year: 2014 Crodpez Hn E Ajfx Aileh Body Note: Manufacturer: FABAG, Model: Climate-controlled Box Van, Year: 2014

Condition: excellent (used), Year of construction: 2018, I - beam section - flat steel 120 x 15 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm round material 35.0 (d 800) mm bar material dia. max. 70 x 2 (d 1200) mm square material 50 x 40 x 3 mm bending speed 4.3 m/min roll diam. toproll 155 mm bore 50,0 mm total power requirement 1.5 kW weight 320 kg range L-W-H 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) Codpozyvbnofx Ailerh - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR IPS DOORS Credpehkr Anefx Aileh MODEL: PC-2500-SCBP Machine for applying adhesive protective film to flat surfaces. Equipped with motorized feed with rollers and an automatic cutting system. Machine for a fixed-height table line, +/- 900 mm. Year 2009. Simultaneous top and bottom adhesion. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2,400 MM - HEIGHT OF ROLLER, ADJUSTABLE FROM THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION OF THE MACHINE 3 KW - MINIMUM REQUIRED AIR PRESSURE 6 BAR - ELECTRICAL INSTALLATION VOLTAGE 220 V - 380 V

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Csdpeu Icl Rsfx Ailerh Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Hydraulic combined punching machine + profile steel shear Manufacturer: Kaast Model: PS 45 Year of manufacture: 2018 Technical data Csdpfx Aioy Alc Nsljrh Make: Kaast Model: PS 45 Year: 2018 Punching force: 45 t Power: 4.0 kW Dimensions: approx. L 1.50 x W 0.80 x H 1.70 m Weight: approx. 1.20 t Equipment - Punching station - Steel shear - Square notching station - Central lubrication All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm Crjdpjx Hp Ahefx Ailsh hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Credpju Ickyefx Aileh Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Bacci Lignum horizontal drilling machine with oscillation, pneumatic table, adjustable Crodpfx Aijwyghbjleh

Condition: used, Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Device features: - Folding press - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Important: Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. Codpjyk H E Tsfx Ailsrh You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.

Condition: good (used), Offer 23477 Hydr. flat profile and bar steel shears and hole punch Technical data: - Flat steel shears cut up to 350 x 12 mm - Steel section shears - cuts L-steel 90° up to 100 x 10 mm - Steel bar shears - cuts round steel up to 32 mm - Notching device - Rectangular notcher 50 x 90 mm - Hole punch - punching force 550 KN - with stop table - throat depth 220 mm - punches holes in steel up to 32 Ø in 12 mm Credora Avdspfx Ailjh - Coordinate table - manual stop - E. foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 900 x H 1750 x D 1700 mm - Weight approx. 1200 kg

Year of construction: 1995, condition: used, A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible. Cedezybuaspfx Ailerh

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Crsdpfx Ajqvnmbsiloh

Condition: used, Year of construction: 1990, Gebruikte ponsmachine van Kingsland Type: 55 P 625 Capaciteit: 55 ton Keeldiepte: 625 mm Bouwjaar: 1990 Crsdpfx Aioyu Sqislsh

Condition: excellent (used), Year of construction: 2000, CHAIN MORTIZER for door production Max slot length : 300 mm Credpfsyryyajx Aileh Max slot depth : 170 mm Transversal head stroke : 100 mm Head tilting Chain engine : 5,5 Hp 2 x horisontal drills , Ø : 38 mm, CC distance : 75 mm 2 x vertical drills : CC distance : 85 mm Pneumatic clamping.

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm Csdpfxsydqn So Ailjrh notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop