Used Section Roller for sale (10,504)

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 straightening roll diameter 45 mm number of draw-in rolls 2 inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm material thickness / at material width 4,0 / 120 mm Hsdpfx Adovuk N Hjajh material thickness / at material width 5,0 / 80 mm power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control via light barriers as is where is, WITHOUT additional work The putting into operation in our warehouse can be offered additionally on request

Condition: used, Year of construction: 1982, material width 250 mm material thickness 0,4 - 5,0 mm no. of straightening rolls 9 Hjdpfx Adovuk Nyeajh straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm material thickness at 100 mm material width 5,0 mm power requirement 1,8 kW weight 0,9 t dimensions (LxWxH) 1,45 x 1,4 x 1,55 m with infinitely variable drive, centralized adjustment of the straightening rolls, indication via dial gauges, support of the levelling rolls, coil loop control via proximity switch material thickness 3,5 mm at material width 250 mm material thickness 5,0 mm at material width 100 mm can be inspected in running condition in our warehouse

Condition: good (used), functionality: fully functional, power: 55.4 kW (75.32 HP), fuel type: diesel, Year of construction: 2011, operating hours: 7,340 h, Equipment: air conditioning, cabin, Bomag BW154AP-4AM tandem roller, year 2011 with 7,340 operating hours, in good condition, immediately ready for use, weight 7,300 kg. Transport and delivery possible. Inspection by appointment, also available on weekends. We also prepare customs/export documents. Hedpfx Adextwy Seaeh

Condition: good (used), Powered roller conveyor, L 2450 mm, W 620 mm, NORD gear motor, data according to the nameplate. To operate the roller conveyor, a control unit must be installed, preferably with a frequency inverter for speed regulation. The roller conveyors were set up on the floor. See the attached photo with the leveling plate. Price per unit. 24 units available. Hedpfx Adjx Tfrxeajh

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Other similar roller tables also available. Hodpfx Adot E Nw Toajh

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Hjdpfx Adsyayiweajh

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works Hedpfxeyayiqs Adajh

Condition: excellent (used), Year of construction: 2003, Manufacturer: Siat S.p.a. Model: S8/4-CE Hedpsv A Rghofx Adaoh Type: A Serial number: 1647 with roller conveyor 70 x 56 cm PRICE REDUCTION, as the lower tape dispenser is missing!

Condition: ready for operation (used), Rollers unused, year of manufacture 2015 510 pieces with Lenght: 380 mm — Diameter: 133 mm — Axis: 30 mm. Hsdpfxei A Awms Adaeh *Brand: Precimeca / Continental:= SOLD OUT 857 pieces with Lenght: 750 mm — Diameter:  133 mm — Axis: 30 mm.= SOLD OUT 341 pieces with Lenght: 530 mm — Diameter: 133 mm — Axis: 30 mm.= SOLD OUT

Condition: used, working width: 2,000 mm, Peecon land roller    • Working width: 2000 mm    • Cat 2 linkage    • Well-maintained land roller Hjdpfjyaukpex Adajh Condition: Used

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, coil weight: 15,000 kg, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, inner diameter: 508 mm, sheet thickness (max.): 4 mm, outer diameter: 1,800 mm, coil width: 1,600 mm, number of blades: 4, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 75 mm, load capacity: 15,000 kg, space requirement width: 3,500 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, feed roller diameter: 250 mm, number of feed rollers: 2, CTL Demaq Evo. New, stock. Coil up to 15 Tons D1800, 20-24" Nominal. Coil Cart hydraulic. 2 pinch-role of feeder and 11 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 4 longitudinal knifes, axis (HC) 230 mm, knifes 300 mm. Transversal shear. Hjdpsu Ey D Sjfx Adajh Full made in Spain in our facilities. Optional other devices and configurations. The most advanced Demaq SPL machine. 2 units available.

Year of construction: 2006, condition: used, Field of application: Construction Serial number: TFAAV16EY6001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21721 Hjdpjxu A Nbofx Adaoh Specifications: 2006 model Hours: uncertain Weight: 1580 kg 15.3 kW Working width: 90 cm Functions as it should Little use during the last 5 years Ready for delivery Own weight: 1580 Kw: 15,3 Model: 2006 AMMANN AV16-2 Vals

Condition: used, Year of construction: 2019, Serial number: WGH0H262THAA0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20939 Specifications: 2019 model Hours: Approx. 420 (can increase) Weight: 2695 kg 22.9kW Working width: 1.2 m Ready for delivery Hjdpfx Adjwx Eaasaeh Own weight: 2695 Model: HD12 VV

Condition: used, Year of construction: 1999, No. 6 roller blinds belts, motorized, for drying varnished chairs or similar products (see video) Available dimensions: mt. 4 x 22.5 mt. 4 x 24.5 mt. 4 x 24.5 mt. 2.3 x 27.5 mt. 2.3 x 27.5 Hsdpfx Adsyaqy Toash mt. 2.3 x 27.5

Year of construction: 2014, condition: good (used), machine/vehicle number: ONK25SR/4/1, Vegetable sorter / grader with sorting range from 1cm to 10cm and above Hjdpfxewzwi So Adaoh

Condition: good (used), Year of construction: 2011, Automatic unloading line for box pallets. The line is manufactured by MEGA and consists of roller conveyors, a turntable, and a tipper. Suitable for all types of vegetable unloading from box pallets / bins. Hsdowylikspfx Adash

Condition: excellent (used), Affordable sectional door from Swiss demolition, 8 m wide, 4.2 m high, with door. Hjdpfxex Tbhco Adajh

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, Used machine Year of manufacture: 1989 Completely overhauled! Very good condition Material width: 630 mm Material thickness: 7.00 mm Number of straightening rollers: 23 Sheet thickness - min.: 0.30 mm Hsdpsx I Htasfx Adajh Straightening roller diameter: approx. 30 mm Workpiece dimensions: min. 50 mm Speed: 10 m/min Frame opening: approx. 650 mm Total power requirement: 5.50 kW Machine weight: approx. 6.00 t Space requirement: approx. 2.65 x 1.80 x 1.50 m Hydraulic straightening machine - max. vertical roller gap 7.50 mm - Infeed with conveyor belt – speed adjustable - with hydraulic opening of the roller housing - with automatic oil lubrication for gearbox and universal joints - Main drive motor 4 kW - Digital measuring device

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Hedpfx Adex Symnoajh Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: as good as new (ex-display), functionality: fully functional, New bearings 2pc. Price for 2 is 2600.- EX VAT Hjdpfx Ader Avczeajh

Condition: used, color: yellow, Year of construction: 2021, operating hours: 3,600 h, Year of manufacture: 2021 Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Hsdpfx Adox Sqhisaoh Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: used, fuel tank capacity: 340 l, Year of construction: 2007, operating hours: 7,430 h, Year of manufacture: 2007 Hsdex Sqg Sopfx Adaeh Empty weight: 19.000 kg Dimensions (LxBxH): 634 x 230 x 302 cm Engine type: Deutz Deutz TDC 2012 L06

Condition: used, Year of construction: 2016, operating hours: 232 h, * Engine power: 55.4 kW * Weight: 8,500 kg * Operating hours: 216 h * Model: CA1500D -----Internal vehicle number: 10613----Subject to errors and prior sale. WhatsApp support available! Hodpjvyx Eyofx Adash If you have questions about the vehicle or would like further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: used, Ball transfer table 2000-1007-1000 RA2407 Technical data: Year of manufacture: unknown Condition: good (used) dimensions: 2000x1000 distance balls: 55 mm row, with 75 mm pitch Height: 800 mm - 900 mm Scope of delivery: including feeds Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. Hsdpfx Adewhtc Isaeh We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Stüer conveyor system Roller conveyors 15890-620-600 RA2457 Hodpfx Adjx U Hbqjaoh Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 15890 mm, 3 elements Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik