Used Section Bender for sale (3,047)

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate Ihodpfx Ahowcqmaj Njt

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: Ihsdpfjw Sy Ecsx Ah Nst 90-degree cut: Approx. 100 x 100 x 10 mm. 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Notcher: Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Verify the accuracy of the information with the seller.

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: Ihedpfof Ek H Uex Ah Not -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Year of construction: 1991, condition: used, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm notching: rectangle tool mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm Ihedpfxed Ih Sto Ah Njt 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, Year of construction: 1979, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm cutting capacity 35 t shear : steel sheet max. 10 mm shear: flat material 100 x 11 mm blade length 175 mm triangle notching device for sheet until 8 mm no. of strokes max. 35 Hub/min work stroke ca. 35 mm total power requirement 1,5 kW weight of the machine ca. 535 kg dimensions of the machine ca. 0,97 x 0,45 x 1,55 m Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can Ihjdpfxovw Dvle Ah Not optionally be equipped with. All performance specifications refer to a material strength of 450N/mm². Machine dealer with own stock of 1600 m².

Condition: used, Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shears Projection: 305 mm Two separate foot switches for the punching and shearing side, so punching and shearing can be carried out independently Ihsdpfet Exprex Ah Net Support table on punching side Assortment of tools is included in the price

Condition: used, Year of construction: 1993, machine/vehicle number: 9384, Buchdeckenausbiegemaschine - Case Bender Orient CXYear 1993 - Serial- No. 9384/15344 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Isdpfxeh Aydrj Ah Noht Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Iedef Eywwjpfx Ah Nsht Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Ijdpfx Ajwtpgtoh Neht Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine Ihodjiwa Hcopfx Ah Not On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: used, Year of construction: 1976, round bar steel 28 mm Ihedpowm Rmnjfx Ah Nst square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: used, Year of construction: 1997, Max. punching and shearing power: 1000 kN Holder for hole diameters up to 90 mm Ihjdotyq D Sopfx Ah Nst Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With a range of punches and dies as desired Weight: approx. 3,000 kg

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 120HE horizontal press Iodpfx Aoflc R Djh Neht Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Ijdpfx Aef Epznjh Nsht Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Ihjdpfxekvm S Ne Ah Net Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies Ijdpfxevh I T Ns Ah Njht

Condition: used, Year of construction: 1990, Max. punching capacity: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Ihsdpotmyifofx Ah Not Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Large support table on punching side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight Ihsdpskvm Szofx Ah Net 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Ihedpfx Ahjr R Auze Nst Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so punching and shearing can be carried out independently Assortment of tools is included in the price

Year of construction: 2018, condition: good (used), Make: FACCIN Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø 110 mm Rolling thickness prebending 90 mm Top Roll Ø 900 mm Top Roll Ø 900 mm Bottom Roll Ø 800 mm Side roll Ø Iodpfx Ahskvm Nfe Njht 600 mm Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Max. punching force: 700 kN Ihsdpfx Aeq Iyvvsh Net Projection: 510 mm Cuts 500 x 18 mm on flat steel scissors For example, punch 30 mm diameter holes in 20 mm flat iron Quick change device Assortment of tools is included in the price Weight: 3,000 kg

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length Isdpjkwcc Nsfx Ah Nsht 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: used, Max. punching capacity: 600 kN Max. shearing power: 1000 kN Ihsdpfx Asq D E Tceh Nst Punches 20mm holes in 19mm steel Shears on the flat steel shears to 500 mm up to a material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired

Year of construction: 1990, condition: used, Max. punching capacity: 600 kN Max. shearing capacity: 800 kN Ihjdpfsm T Amuex Ah Njt Punches 27mm holes in 16mm steel Shears on the flat steel shears to 400 mm up to a material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for triggering the stroke quick-change device Assortment of tools is included in the price Isdpfx Ahelf Trke Neht