Used Seam Welder for sale (619)

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A Rodpfjwf Rg Eex Ahvsp --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A Rjdpfxowf Rgxs Ahvjp --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Year of construction: 2024, condition: new, Parameter: JSW-2000 Laser power: 2000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 1-phase 220V 50/60 HZ Rjdotwzxuopfx Ahvjp Maximum total energy consumption: 10.6KVA/48.3A Average power consumption: 6.4KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 6mm Carbon steel 0.5 - 6mm Galvanized sheet metal 0.5 - 6mm Aluminum 0.5 - 5mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - OD6+ safety glasses - Welding mask OD8+ - Warranty 24 months

Year of construction: 2024, condition: new, Parameter: JSW-1500 Laser power: 1500W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity:%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: nitrogen / argon / oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet metal 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ Rjdetwzhvopfx Ahvsp - Warranty 24 months

Year of construction: 2024, condition: new, Parameter: JSW-3000 Laser power: 3000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 3-phase 380V 50/60 HZ Maximum total energy consumption: 24.6KVA/37.4A Average energy consumption: 14.7KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 195kg Machine dimensions: Height: 1050mm, Width: 530mm, Length: 1240mm. Material processing capabilities for JSW 3000W welding function. Material: Stainless steel 0.5 - 8mm Carbon steel 0.5 - 8mm Galvanized sheet metal 0.5 - 8mm Aluminum 0.5 - 6mm Rodpetwz Nmsfx Ahvsp Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Rsdpfewp Ilyox Ahvjp Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: excellent (used), Year of construction: 2009, Technical Details : Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Rjdjrn N Efepfx Ahvep Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) 38 m/min (diagonals) Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : Rjdpfeqy Ek Aox Ahvsp - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 Redjryv S Uepfx Ahvsp underwent a mechanical overhaul.) The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Energy demand: 14 kVA (max) Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Condition: excellent (used), Year of construction: 2004, Technical Details : Year of manufacture: 2004 The mesh max. width: 2200 mm Mesh density: 20 welding heads in arbitrary distribution (40 heads are also possible) Increment: 20mm - up to 200mm Wire thickness: 1.6mm-3.0mm (max 550Nnmm) Energy requirement: 8 kW Weight: approx. 10 tons Drive: digital servo, control (PLC).. Stepless regulation.. Accessories: manual Rsdpfx Aheryv Sisvsp

Condition: used, gr. working width: 1040 mm Folding width approx.: 12 mm Rjdpfx Ahscaxtxsvjp for sheet thickness up to approx.: 1 mm Drive motor, gear brake motor: 380 V, 0,55 kW space requirement: 1300 x 480 x 960 mm Weight: 334 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. The upper arm is depth-adjustable and the lower arm is height-adjustable. Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm Redpfx Ahjw T Tlfjvep • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm • Height-adjustable lower arm • Steel frame • 400 V, 50 Hz

Condition: used, current intensivity 400 A open-circuit voltage 65-75 V IP protection class IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control Redpfx Ajd Ih R Nohvjp - Incl. Hose package approx. 6000 mm

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. Rodpfxeqxadbj Ahvsp We make clip formers for 25, 27 or 39mm clip highs. As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Rodpoh R I Iusfx Ahvep Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Rsdpfxjhz Twwo Ahvsp Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Rjdpfx Ajq U N T Rehvep Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Redpfef Ih Hcsx Ahvjp Weight: 280.00Kg

Condition: good (used), 1 used well preserved water cooled gas shielded arc welder MIG-MAG Make: RÖWAG Model: KGL 450-2 technical data: Welding current range up to 450 A Weight approx. 200 kg Accessories / special features: - Water cooling - Separate feed unit with 4-roll wire feeder - Incl. hose package, pressure reducer and ground cable without shown welding wire roll! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel Rodpjhy Tmzofx Ahvsp

Year of construction: 2009, condition: excellent (used), Welding machine for steel, leg. Steel and aluminium Welding current: 25 - 210 A Supply voltage: 230V / 400V Duty cycle: 35 % ED at 210 A 60 % ED at 150 A Current adjustment: stepless Fuse protection: 16 A Dimensions L x W x H 870 x 480 x 800 mm Rodpjf Atlzsfx Ahvop Weight: approx. 75 kg Accessories / special features: - Mobile compact unit - Special thin sheet welding area - 4-roll wire feed - incl. hose package, pressure reducer and ground cable, ... - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, As a machine dealer in Offenburg, we also have welding machines from Rehm in our program. You can get an overview of the machines on our website. If you have any questions, just give us a call. MIG MAG welding machine REHM FOCUS.ARC 300 Manufacturer: REHM Type: FOCUS.ARC 300 Scope of delivery: - Hose package Abicor Binzel 401 4m - Dimension cable 50mm 5m - Pressure reducer - Basket coil adapter Available immediately. For collection by the customer. Forklift available. Shipping also possible Errors, changes and prior sale reserved. Redpfow Eik Njx Ahvop Not the right machine? Then visit our website.

Condition: new, As a REHM specialist dealer, we now have the opportunity for customers in Offenburg and the surrounding area to receive up to 40% subsidy from the state when purchasing a new MIG/MAG PULS welding machine. Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries. REHM MIG/MAG welding machine FOCUS.ARC P REDUCES CO2 AND BRINGS MONEY FROM THE STATE WHO SUPPORTS? The Federal Office of Economics and Export Control (BAFA) supports investment measures to optimize the energy efficiency of systems and processes. WHAT IS SUPPORTED? Investments that demonstrably lead to energy savings and thus to a reduction in CO2 emissions can be subsidized. For example, if you want to replace step-switched welding machines with high energy consumption with efficient REHM welding technology, you can take advantage of the Module 4 subsidy. The costs for drawing up the energy-saving concept and implementation support from an external energy consultant are also eligible for funding. The amortization period for the entire measure must be more than 2 years. Rjdpfew Eikvox Ahvop HOW MUCH FUNDING IS AVAILABLE? Up to: - 40 % of the costs - 900 € per t CO2 - 10 million € BAFA supports large companies with up to 30% (maximum €500 per tonne of ton of CO2 saved) and small and medium-sized companies with up to 40% (maximum €900 per ton of ton of CO2 saved) of the eligible costs. The maximum funding amounts to 10 million per investment project. WHO IS ELIGIBLE FOR FUNDING? Private and municipal companies with a permanent establishment or branch in Germany are eligible to apply. The planned measures must be carried out on the territory of the Federal Republic of Germany. A BAFA-approved energy consultant must be commissioned to draw up the obligatory energy-saving concept. HOW DO YOU APPLY FOR FUNDING? 01. list: Make a list of all appliances that are to be replaced and all appliances that are to be purchased. 02. check: We take the necessary data from you and check your funding amount provisionally. At the same time, we prepare a quotation for the new welding equipment. 03. energy consultant: We prepare all the data for you and pass it on to an energy consultant who works with us. This saves you time and money. 04. application: After checking the data, the energy consultant submits the application for funding on your behalf. 05. processing time: If it is urgent, we can speed up the processing of the application for you. for you. This reduces the processing time to approx. 10 to 15 days. The following MIG/MAG PULS welding machines from REHM are eligible for BAFA funding: Without wire feed case: FOCUS.ARC P 250 0.8/1.0mm FOCUS.ARC P 250 W 0.8/1.0mm FOCUS.ARC P 300 1.0/1.2mm FOCUS.ARC P 300 W 1.0/1.2mm FOCUS.ARC P 350 1.0/1.2mm FOCUS.ARC P 350 W 1.0/1.2mm FOCUS.ARC P 400 1.0/1.2mm FOCUS.ARC P 400 W 1.0/1.2mm FOCUS.ARC P 450 1.0/1.2mm FOCUS.ARC P 450 W 1.0/1.2mm With wire feed case: FOCUS.ARC P 250 S 0.8/1.0mm FOCUS.ARC P 250 WS 0.8/1.0mm FOCUS.ARC P 300 S 1.0/1.2mm FOCUS.ARC P 300 WS 1.0/1.2mm FOCUS.ARC P 350 S 1.0/1.2mm FOCUS.ARC P 350 WS 1.0/1.2mm FOCUS.ARC P 400 S 1.0/1.2mm FOCUS.ARC P 400 WS 1.0/1.2mm FOCUS.ARC P 450 S 1.0/1.2mm FOCUS.ARC P 450 WS 1.0/1.2mm Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries.

Year of construction: 2005, condition: excellent (used), very good condition Rsdpfofluucjx Ahvjp

Condition: ready for operation (used), Technical characteristics 2 straight welding heads, one mobile head CN command Rsdpfx Ahoundfwsvsp Adjustment for heating time, hardening, welding temperature, fusion and cutting pressure ascending heating plate rapid changing in function of elements width Power and Motors Power: 4 Kw Overall dimensions

Condition: new, Year of construction: 2025, Starweld PE Rsdpfx Ahjd Rlaisvep STARWELD PE is a high performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets. The mechanisms are designed in a way that the produced mesh is of high quality, even when the wire processed is of a very small diameter. Products can be used for cages, fencing, etc. Features: Line & cross wire feeding from coil Edge trimming Mesh fabric slitting Fully or semi automatic system for mesh cutting, rolling & ejecting Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life Specifications Model PE2100 PE2600 PE3100 Mesh Width (mm) 2100 2600 3100 Min Line wire spacing (mm) 25 25 25 Min Cross wire spacing (mm) 12.5 12.5 12.5 Range of wire diameter (mm) 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 Working speed (strokes/min) Up to 160 Up to 150 Up to 130