Used Screw In Temperature Sensor for sale (28,259)

Condition: excellent (used), CTS Type: T-40/600 Water-cooled temperature test chamber Control system: - 32-bit controller - LCD operator panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text Dedpfx Acox E Tq Te Njkh - RS 232 interface - Free relay channels for user-side test item control Technical specifications Temperature tests: Temperature range: -40 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K (over time) Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal radiation: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without test specimen, no heat input, and without additional equipment. Dimensions: Test chamber volume: 600 liters Test chamber interior dimensions (HxWxD): approx. 850 mm x 850 mm x 830 mm External dimensions (HxWxD): approx. 1900 mm x 1120 mm x 1875 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 7.1 kW Rated current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A Weight: 700 kg Important safety information for buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and errors reserved!) We are happy to answer further questions by phone.

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Dsdpoyhcghefx Ac Nokh Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Dkjdpfjyhcc Ajx Ac Njh Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Conveyor screws, screw conveyors Heavy-duty design, suitable for high capacity Specifications: 1x conveyor screw, diameter 470mm, length: 4000mm 1x conveyor screw, diameter 420mm, length: 6450mm 1x conveyor screw, diameter 320mm, length: 3800mm (without electric motor) 1x conveyor screw, diameter 420mm, length: 8500mm 1x conveyor screw, diameter 420mm, length: 3550mm 1x conveyor screw, diameter 420mm, length: 4050mm 1x conveyor screw, diameter 420mm, length: 5000mm Equipped with heavy-duty external bearings with shaft seals. Available individually or as a batch. For more information, please contact us. See our other listings as well VMA Wekerom Dkedpsyhblpofx Ac Njh

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design Dedpfoyfm Spex Ac Nskh The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder Dsdpfx Aeyfm Epec Nekh As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: new, Year of construction: 2026, Tüm ürünlerimiz özenle üretilmiştir ve 1 yıl garanti kapsamındadır! Kurulum ve Operatör Eğitimi ÜCRETSİZ • Model: FABO HY-600 • Tip: Çift Helisli Burgu Yıkayıcı Dkjdsyg U I Iepfx Ac Njh • Kapasite: Saatte 60 ton • Ölçüler: 1400 x 6650 x 1800 mm • Boru Çapı: Ø 600 x 6000 mm • Hız: Dakikada 22 devir • Motor: 2 x 5.5 kW Ağır Hizmet Gamak Motor • Su Tüketimi: 55–205 m³ • Şasi, motor ve güvenlik muhafazaları dahildir. DAHA FAZLA BİLGİ İÇİN LÜTFEN BİZİ ARAMAKTAN ÇEKİNMEYİN!!!

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Atlas Copco GA160VSD+FF screw compressor. Integrated dryer and frequency converter. 160 kW with 8.3 bar and 35.6 m3/min. Heat recovery system installed. Dedpfx Acoyfl Ivs Njkh

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Maximum operating pressure: 10 bar Dksdpfx Ast Du Syjc Noh Compressed air production: 192 l/s Power: 75kW Speed: 3000 r/min Weight: 1550kg

Condition: used, External circulating bath, circulating thermostat, temperature bath, water bath, circulating bath Djdpfx Acexcbnxo Nokh BROOKFIELD Type TC-102D Serial No. D07200476 Temperature range: +5 °C to +150 °C Temperature stability: ±0.05 °C Temperature uniformity

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 1003046, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4 m³/h, operating pressure: 10 bar, pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Fixed speed screw air compressor, 30kW, 40hp. 4000 operating hours, condition like new. Dkedpfsyg Iawox Ac Nsh

Condition: good (used), Year of construction: 1996, operating hours: 8,400 h, functionality: fully functional, power: 18.5 kW (25.15 HP), operating pressure: 8 bar, Max working pressure 7,5 bar power 18,5 kW approx. 8400 working h GA18 age 1996 Dsdpfx Asyg H Tisc Nskh air dryer FX15 age 2016

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Dedpsyg H Tcjfx Ac Nokh

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dodpfx Acjtx Aknj Njkh Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Condition: good (used), Year of construction: 2002, Screw Compressor Water Cooled Fabr.BOGE Type:SO150 Bj.2002 Dkedpfoh Hi Inox Ac Njh Compression final pressure 10 bar Motorl.110KW with refrigerant dryer . Mass: L3,5m B1,5m H1,7m Weight each approx. 3200 Kg. Documentation available. 4. piece Available . Price for 1.piece .

Condition: used, functionality: fully functional, The screw separator is available for sale Length: 900 mm Profile: 6 mm high Roller diameter: 100 mm Dksdpfxoyg Hp Ro Ac Njh Speed: adjustable Mobile design

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Diameter 50 mm Diameter 40 mm In good condition. Dksdpfsh I T Nrsx Ac Neh

Condition: good (used), Year of construction: 2014, Screw Compressor ALMiG COMBI 8-10 – Year of Manufacture 2014 – Excellent Condition For sale is a used screw compressor from ALMiG, in very good, well-maintained condition. Manufacturer: ALMiG Model: COMBI 8-10 Year of Manufacture: 2014 Compressor Type: Screw compressor (COMBI version) Technical Specifications: Free air delivery according to ISO 1217 at 10 bar (g): 1.02 m³/min Installed motor power: 7.5 kW Drive motor speed: 3,000 rpm Protection rating / insulation class (drive motor): IP55 / F Efficiency class: IE3 Operating voltage: 400 V Frequency: 50 Hz Dimensions & Weight: Dksdpfx Aeyg Hdnoc Nsh Dimensions (L × W × H): 1,180 × 770 × 1,128 mm Weight: 345 kg Other Information: Sound pressure level (DIN 45635 T.13): 64 dB(A) Compressed air connection: G 3/4″ The compressor is ideally suited for workshops, trades, and industrial operations. Very compact design, quiet operation, and reliable technology. Location: Burbach Inspection: By appointment We load on site Transport: Can be organized Sale as inspected. Subject to prior sale and errors.

Condition: new, High temperature chamber furnace, make VEI Dodpfsdyvkyox Ac Njkh max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm Dksdpfx Aceyg Eghj Noh The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: used, machine/vehicle number: IC1294, Year of construction: 2021, operating hours: 1,100 h, load capacity: 1,300 kg, enginetype: Electric, manufacturer: Jungheinrich Dkjdpfx Aceygzfgj Neh

Condition: good (used), Year of construction: 2011, MANUFACTURER: ATLASCOPCO MODEL: GA160VSD S/N: APF163595 YEAR: 2011 Dedpfoygx U Sox Ac Nokh POWER (kW): 186 CAPACITY (m3/min): 4.82–18.36 PRESSURE (bar): 10 HOURS (DOC/TOTAL): FREQUENCY INVERTER: yes

Condition: reconditioned (used), functionality: fully functional, used rack oven Miwe Roll-in RI 1.0608-TL electro, overhauled, with hood, with touch display, electrics newly wired, new seals, circulator with new bearings, 72.6 kW, 400 V, 50 Hz, serial no. 47 707 Dedpfx Acjwrth Ej Njkh

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm Dsdpfxeydk Ifo Ac Nskh dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: used, Technical specifications: Operating hours: 2443 h Tank capacity: 500 l Performance: 950 L/min Pressure: 10 bar Electric temperature display Safety switch Power supply: 400 V Motor power: 9 kW Dryer: Max pressure: 15 bar Max ambient temperature: +45°C Overall dimensions: Length: 1950 mm Dodpfx Asx Hghbsc Njkh Width: 750 mm Height: 1400 mm