Screw compressor GA160VSD+FF

Atlas Copco GA160VSD+FF

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA160VSDFF S/N APF195117 YEAR 2014 POWER (kW) 186 CAPACITY (m3/min) 4.82-26.70 DISCHARGE PRESSURE (bar) 8.3 HOURS (RUNNING/TOTAL) 67773 FREQUENCY CONVERTER yes BUILT-IN DRYER yes AFTERCOOLER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no CONNECTION 3 Iedezl S Smopfx Aa Eeaw NEW/USED USED

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Iodpewlp Hdsfx Aa Ejaw Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: like new (used), Year of construction: 2021, operating hours: 25,495 h, functionality: fully functional, Screw compressor Atlas Copco GA160VSD+FF. Integrated dryer and frequency converter. 160 kW, 8.3 bar, 33.10 m³/min. Year of manufacture: 2021. Operating hours: 25,495. Ijdpfx Asyzg Eisa Eoaw

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Isdpfx Ajxz A Tmja Esaw Number of Clamps: 5 clamps Glazing unit Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 80 mm Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Condition: as good as new (ex-display), 3 Pcs. “UNUSED – SEW R147 DVE280S4” for Sale Also many other Geared Motors on stock. Manufacturer: SEW Eurodrive Iaedpfeglvvuox Aa Eow Type: R147 DVE280S4 Power: 75 kW Voltage: 230 / 400 V Amperage: 240 / 137 A Hertz: 50 Hz Ratio: 8,26 : 1 RPM in/out: 1.480 / 179 Shaft ø out: 110 mm Weight: 887 / 952 kg

Condition: used, Year of construction: 2002, For sale: a professional combined coil metal processing line by Finnish manufacturer Macring / Sintech, manufactured in 2002. This line is designed for uncoiling, leveling, longitudinal slitting, sheet cutting, and recoiling of coiled metal into smaller coils. The equipment is suitable for precision cutting of metal up to 1500 mm in width. The machine is currently dismantled; however, all connection elements are labeled, which makes recommissioning and assembly easier. The line is operated via a hydraulic system. Line configuration: - Uncoiler – 8 T - Metal leveling segment - Longitudinal slitting unit - Spare slitting knives - Sheet cutting guillotine - Braking and separating segment - Turnstile with separator - Recoiler – 8 T - Control panel - Electrical cabinet - Lifting/lowering table - Safety fences Technical specifications: - Maximum metal width: 1500 mm - Maximum coil weight: 8 T Iaodpfoy N Sqgex Aa Eew This equipment is suitable for sheet metal processing as well as the production of ventilation, roofing, façade, and other metalworking products. If you have any additional questions, we will be happy to answer them.

Year of construction: 2025, condition: new, Pipe Shot Blasting Machine A pipe shot blasting machine is a specialized surface treatment system designed for cleaning, roughening, or preparing the inner or outer surfaces of cylindrical (pipe-shaped) metal parts. It removes rust, oxide, scale, burrs, and old paint coatings using high-speed abrasive blasting (with steel shots, grit, or sand). ⚙️ Working Principle Loading: Pipes are placed on a roller or conveyor system for easy movement. Transportation: The pipes are automatically conveyed into the blasting chamber via a roller conveyor or continuous feed line. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive material onto the pipe’s surface. During the process, the pipe rotates and moves forward, ensuring uniform cleaning across the entire surface. Cleaning and Recovery: The used abrasive is automatically collected, filtered, and reused. Dust and impurities are removed through an industrial dust extraction and filtration system. Ijdjxuhrbepfx Aa Eeaw CODE DIMENSIONS TURBINE CBK - 1 Ø 48 – 219 2 x Ø 320 CBK - 2 Ø 219 – 500 2 x Ø 320 CBK - 3 Ø 500 – 1000 2 x Ø 500 CBK - 4 Ø 1000 – 2000 2 x Ø 500

Year of construction: 2021, condition: ready for operation (used), overall weight: 2,377 kg, total width: 2,020 mm, total height: 1,785 mm, product length (max.): 2,500 mm, Compressor manufactured in 2021. This Atlas Copco GA 110 VSD+ features a power output of 114 kW and operates at an adjustable pressure range of 6-10 bar. It includes a refrigerated dryer model FD410VSD, ensuring efficient air compression. If you are looking to get high-quality compressed air capabilities, consider the Atlas Copco GA 110 VSD+ machine we have for sale. Contact us for further details. • Condition: Used, not rebuilt, without warranty • Technical specifications: • Power: 114 kW • Operating pressure: 6–10 bar • Compressed air temperature: 23.1°C • Sound pressure level: 78 dB(A) • Oil content: 3 mg/m³ • Cooling air flow (compressor): 5 m³/s • Cooling air (motor): not specified • Cooling air flow (frequency converter): 0.16 m³/s Iaedpfx Ajy Dgi Hsa Ejw • Oil capacity: 106 l • Maximum installation altitude: 1000 m a.s.l. Additional equipment • Refrigeration dryer: • Manufacturer: Atlas Copco • Model: FD410VSD • Year of manufacture: 2021

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, Screw Compressor with Inverter ATLAS COPCO ZT 55 VSD 18.5kW 3.35m3/min 13bar Iaedpfxoy Amh Ho Aa Ejw The professional level of service and high-quality goods offered by our company – 'market-proven' – guarantee successful cooperation with you. We provide a warranty on used compressors and dryers! Our advantage is 24/7 compressor service. Screw Compressor with Inverter ATLAS COPCO GA18VSD 18.5kW 3.35m3/min 13bar Technically sound, ready for operation.

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, Screw Compressor Atlas Copco GA160 160 kW Ijdpfx Aeyzhccsa Esaw 7.5 bar 30.20 m3/min Year of manufacture: 2017 Operating hours: 36,772