Used Scm Si 450 E for sale (587)

Condition: excellent (used), SCM Sintex four-sided planer. Hodpfx Ajx E R Hxog Iofg

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Hodpfx Aod Akygjg Ijfg Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Special SCM guide system for the saw carriage. The curved design between the ball bearings and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scoring unit can be easily swung in and out from the outside; a special plate enables precise positioning. The rip fence is extremely robust and can be used for both longitudinal and mitre cuts; quick reset to the starting position. The precise flip stops allow for direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilting: 45° Max. main saw blade diameter: 300 mm Max. scoring saw blade diameter: 100 mm Hfsdpfoy Nugdsx Ag Ieg Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4,000 rpm Scoring saw speed: 8,000 rpm Cutting width with parallel fence: 1,000 mm Extraction port diameter: 100 mm Motor: 4 kW Weight: 425 kg Availability: short notice Location: Röllbach

Condition: used, Type SI 15 WF Hfsdpfx Aeitvd Iog Ijg Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Price 1200 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Hfsdjxqtvqepfx Ag Ijg

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Extraction port diameter (mm): 120, 60 Hedpeit I Sbefx Ag Isfg

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AE00002748, 12kN SEMI-AUTOMATIC CAM PRESS Brand: SCM Model: Action E Serial No.: AE00002748 Year: 2021 MAIN ADVANTAGES: - Better pressing quality, uniform across the entire surface to be machined (comb structure) - Parallelism and orthogonality thanks to the use of screws of the appropriate size. - Efficient operation with knobs FEATURES: - Machine frame: extra-rigid welded monoblock chassis Movable side work surface (X direction) Movable upper work surface (Y direction) Movement of each support is transmitted via a geared motor. This drives two trapezoidal screws of the appropriate size and equipped with a double chain sprocket (5/8"), a system that achieves the best possible parallelism for the movable supports. - Worktop height from floor: 60 cm - Maximum usable dimensions: 2400 x 1100 (H) x 700 mm - Minimum usable dimensions: 250 x 270 (H) x 250 mm - Maximum horizontal pressure: 1000 kg Positioning speed: 50 mm/sec - Maximum vertical pressure: 1500 kg Positioning speed: 45 mm/sec - Movement achieved by high-precision systems using AC motors. - Power supply: 400 V. Three-phase 50 Hz IN 6 A Installed power: 4 kW - CE marked - Lockable disconnect switch, mushroom stop Dimensions in operating order: x x h. mm Space required around the machine for movement and work: m Hedpjwf I Iajfx Ag Iofg Transport dimensions (LxWxH): x x h.m Weight: Kg Machine supplied with its manual, spare parts list, and diagrams. Machine serviced, brought into compliance, with quality control and dynamic functional testing. With a 3-month warranty and certificate of compliance. Available from stock, subject to prior sale.

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,330 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, overall weight: 670 kg, Equipment: CE marking, saw blade guard, – Italian production – year of manufacture: 2012 TECHNICAL SPECIFICATIONS: – carriage length: 3200 mm – cutting width on the right: 1330 mm – saw blade diameter: min. 250 mm, max. 315 mm – scorer blade diameter: 120 mm – main motor: 5.5 kW – scorer motor: 0.75 kW – brake Hodpfoyxph Ujx Ag Iefg – main saw spindle diameter: 30 mm – scorer spindle diameter: 20 mm – cutting height adjustment – cutting angle adjustment: 0° - 45° – max. cutting height: 100 mm – two latches – movable guard – extraction nozzle diameter: 80 and 120 mm – dimensions (L/W/H): 340 / 220 / 170 cm – weight: ~ 670 kg

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, overall weight: 850 kg, rotational speed (max.): 5,000 rpm, table length: 3,100 mm, table width: 360 mm, machine/vehicle number: KK00034979, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Table dimensions: 3,100 x 360 mm Speed range: 3,500 and 5,000 rpm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,000 x 4,000 x 1,700 mm Weight: 850 kg EQUIPMENT Digital measuring device up to 2,000 mm Extraction unit Hfjdpfxeynhkxe Ag Iog Note: The saw can be transported on a standard truck External reference: Groven - Lot 23

Condition: good (used), Code: 0299 Brand: SCM Model: S 630/E - CE Standard Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Hfjdpfeyi E T Tjx Ag Ijg Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

Condition: excellent (used), Table length 300 cm Ground clearance 105 cm Undercutter Hodemmci Uspfx Ag Iefg 5,5 kW engine

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Hfjdoxw N N Hepfx Ag Ijg EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Hedsxw N Sbspfx Ag Iofg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Hfjdpfx Aov S Uz Isg Ieg Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: used, Year of construction: 2007, used, top specification, machine overhauled, cleaned, fully adjusted trial planing with Tersa cutter block large planing height New parts: key bar for cutter block 2 outfeed rollers 1 table pressure roller with complete adjustment bearing blocks Tersa planer knives Make: SCM Model: S630 E- Invincibile Year of manufacture: 2007 Hjdpfxowqg R Do Ag Ijfg Machine number: AB/184684 GS tested CE type tested GS wood dust tested Upgraded motor: 7.5 kW Planing width: approx. 630 mm Planing height: approx. 300 mm table pressure rollers: 2 adjustable chain pressure bar chain feed roller rubber outfeed roller (2x new) variable feed up to 20 m/min number of knives: 4 automatic motor brake knife system: Tersa reversible knives digital display for planing height electric height adjustment extraction port: 160 mm space required: approx. 1400 x 1000 x 1200 mm weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AHH/157/00, functionality: fully functional, total length: 12,500 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit type: Pre-milling unit 2. Unit type: Glue application unit 3. Unit type: Pressure rollers 4. Unit type: End trimming unit 5. Unit type: Rough milling unit 6. Unit type: Corner rounding unit 7. Unit type: Radius scraping unit 8. Unit type: Flat scraping unit 9. Unit type: Brushing unit MACHINE DETAILS Hfedpfxoy Nxrdj Ag Iog Voltage: 400 V Current consumption: 36 A Fuse: 63 A Power: 14.4 kW Dimensions & Weight Dimensions (L x W x H): 12,500 x 2,400 x 1,900 mm Weight: 4,000 kg EQUIPMENT Tools CE marking

Condition: excellent (used), functionality: fully functional, SCM Superset XL four-sided planer Working width: 15-230 mm Working height: 6-120 mm Number of spindles: 6 Spindle configuration: Bottom Right Left Top Bottom Universal / glazing bead saw unit Spindle speed: 6000 rpm Pneumatic pressure rollers Hfjdpfx Aoy Sr Nnjg Iog Feed speed adjustable via inverter: 5-25 m/min Drive via cardan shafts CE certificate

Condition: used, working area 2.600 x 1.250 mm spindle drive 7,5 kW feed max. 38 m/min x-axis 2.700 mm Hjdpon A Dwgofx Ag Iofg y-axis 1.600 mm z-axis 250 mm SCM Routech R 3000 CNC machining center for processing sheet material with automatic feeding (vacuum destacker) and discharge. Video: Upon request Special price for self-disassembly and self-collection.

Condition: used, machine/vehicle number: 008391, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 28 m/min Hfodsygta Nopfx Ag Ieg Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Hsdoytrgzjpfx Ag Isfg Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: used, machine/vehicle number: 008439, X axis working area: 3100 mm Y axis working area: 1300 mm Hfjdpjyngzcsfx Ag Iog Working Table: Pod and Rail Main Electrospindle power: 8.5 KW Number of controlled axes: 4 axes Total number of tool changer positions: 18

Condition: used, Cart 320cm Tiltable blade slash Hfjdpfx Aey Rrryeg Iog 380V

Condition: used, Year of construction: 2016, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Colour: Grey Empty weight: 1.310 kg Hedpsxy Rk Rjfx Ag Iofg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Morbidelli M800 X5 machining center X working field: 6360 Y working field: 1680 Z working field: 350 Hjdpfjx I A Aqox Ag Iefg 5-axis electrospindle with liquid cooling, 13 kW – HSK 63F Tool magazine disc moving on X-axis, 48 tool positions Processing unit with Vector 360° axis 1 cutting saw blade 1 vertical outlet for milling 3 vertical outlets for drilling 3 vertical outlets for handle holes 2 horizontal outlets for milling 2 horizontal outlets for drilling CE safety system with bumpers CNC PC-Office control with integrated computer 3D programming system WOP XILOG-MAESTRO 250 m³/h vacuum pump Available December 2026.

Condition: excellent (used), Planer-thicknesser SCM FS 41E Hfedpfjy Shkuex Ag Ieg Planing width: 41 cm, 4 Tersa knives, 2 feed speeds for thicknessing, Maximum thicknessing height: 23 cm, Table length: 200 cm, Adjustable angled fence, Machine in very good condition.