Used Sawing Line for sale (20,241)

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV Hfedpfx Ajvuuduoh Nsb with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. Hfedpfx Asx Tifieh Nsb The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), Format Circular Saw FKS 550-3200 M A PRO - Year of manufacture: 2023 - Max. cutting height: 200 mm - Cutting height: 200/140 mm - Crosscut width left of the saw blade: max. 3200 mm - Cutting width with parallel fence: 1450 mm - Saw blade tilting: 90 – 45° - Dimensions (LxWxH in mm): 3,386 x 3,703 x 1,330 - Main saw blade with belt drive and speeds: 2800/3665/4800 rpm - Vibration-free operation due to high dead weight (1,070 kg) - Large support table with material roller - Parallel fence with round bar guide - Extendable aluminium rip fence with digital display (2 folding stops) - Quadruple ball-bearing format sliding table with twin roller carriage made of anodised aluminium, high torsional stiffness - Large pendulum safety guard with gas pressure spring - Multiple locking positions on sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Tool-free rapid system for saw blade clamping - Saw unit can be switched on and off - On/off switch on the sliding carriage Hfodpfxexfku To Ah Njb - Edging length: 3200 mm

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Hjdpjx Tf Itefx Ah Njfb

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min Hedpjx Ah A Aefx Ah Njfb - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, feed length X-axis: 3,000 mm, Equipment: CE marking, The Störi Mantel Leg Machine is an automatic device for producing the bottom parts of wooden pallets, also known as pallet bases or legs, which operates on the proven principle of electromechanical nailing. Hjdpfeubbu Uex Ah Nofb The main key features that will increase your production capacity, save on operational and personnel costs, and speed up the entire pallet nailing process include, for example, the production cycle speed, the possibility of integration with other equipment such as a cross-cut saw or pallet nailing machine, convenient operation of the entire machine by a single operator, and easy maintenance and servicing. The Leg Machine can be designed with a maximum leg length of 1 500 mm or 3 000 mm.

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm Hfjdpfxsvut Sds Ah Nob number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic

Condition: like new (used), Year of construction: 2012, functionality: fully functional, KHS CAN FILLING LINE FOR CSD AND BEER Technical Data Capacity: 25,000 bph (0.5L) Product: Carbonated soft drinks and beer Can Formats: 500ml 211/202 Lid Formats: 211/202 Packaging: Tray with shrink film Application: CSD and beer Condition: Good technical condition, dismantled Scope of Supply - Bulk can depalletizer | LINKER | DPG-500 | Year: 2012 - Can inspection system | TransTech | Hysek CanCheck | Year: 2012 - Can conveyors | LINKER / KHS | Conveyor RC | Year: 2012 - Can rinser | LINKER / KHS | Triplex Rinser TR | Year: 2012 - Flash pasteurizer | KHS | Innopro 140/14/85 | Year: 2012 - Can filler | KHS | Innofill Can DVD | Year: 2017 - Can seamer | Ferrum | F08 | Year: 2012 - Lid feeder | NSM | Lidserver A30 | Year: 2017 - Conveyor | KHS | Innoline BTR | Year: 2012 - Fill level inspection | KHS | Innocheck CUB | Year: 2012 - Can blowing unit | Europool | – - Tray packer | KHS Kisters | SP0502 | Year: 2012 - Pack conveyor | KHS | Innoline GTR | Year: 2012 - Handle applicator | KHS | CSM 050-2 | Year: 2012 - Packing machine | KHS | Innopack 035 B2 + FS A-L | Year: 2012/2017 - Palletizer | KHS | Innopal PBL1N1 | Year: 2012 Hedjx U Snpopfx Ah Nefb - Stretch wrapper | SIAT | MFP | Year: 2017 - Pallet conveyor | KHS | Innoline PTR This line is suitable for bottling carbonated soft drinks and beer in 500ml cans, with a maximum output of 25,000 cans per hour. It comes dismantled, in good technical condition, and ready for reinstallation.

Condition: new, Year of construction: 2025, The Forstner POWER COMPACT PRO combines maximum cutting performance and minimum space requirements. It is used in larger companies with serial production. The size of the components is the decisive factor for the advantages you want to benefit from. At its core is a robust and reliable automatic straightening unit with six rolls and a powerful longitudinal divider that can be equipped with the desired number of knives. . Output 2.00 mm at 400 N/mm². Equipment: Hfodpfx Aoma Sbtoh Njb 5 tons uncoiler (multiple solution possible) Lifting table Roller infeed hopper Feeding table Automatic straightening unit with MOP function (no standstill markings) 5 pairs of slitting knives motorized guillotine shear touch control speed 25m/min (optional up to 45 m/min) options like guillotine shear extension, stacking unit or recoiling function possible

Condition: good (used), In good technical condition and fully operational. Hfodpfx Aox Tf Hcsh Nsb Manufacturer: Bud Masz M. Stachlewski Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, anti-condensation treatment, light-transmitting profiles

Condition: used, Year of construction: 2009, NP 694 | COMPLETE BOTTLING LINE PET 72,000 BPH Product: Still Water Speed: 72,000 BPH at 0.5 l Year: 2009 Cap: Corvaglia 29/26 Tanner Preform Hopper KHS Triblock Preform Elevator Preform Orientator PET Blower: Model: Blowmax 36S Series IV Compressor: AF Chiller: Riedel Hjdpfx Ajx Tfr Eeh Nsfb CIP: KHS Filler: 100 valves - mechanical Filling type: Gravity Capper (including elevator and cap orientator) Workable cap type: Pre-threaded plastic Cap size: Corvaglia 29/06 Cap distribution system: pick & place Labeller: PE Model: Simple cut KS177 Rotation direction: counterclockwise Electronic cam plates Roll feed station Bottle inspector: Presco Model: intellispec Conveyor belts: KHS Shrink Wrapper: KHS Model: Innopack Kisters TSP Version: film launch Palletizer: Alvey 942 Type: push Pallet storage Pallet wrapper: Lantech Model: S1500 Wrapping type: Rotating arm Pre-stretch

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, Simple machine for longitudinal and cross cutting in the thickness range of 0.40 to 0.80 mm and width up to 1250 mm. Specification: Hjdpfx Aox U Exhoh Nefb - The machine is equipped with 6 pairs of knives and can be divided into 7 strips, with a minimum strip width of 60 mm (manual adjustment). Cutting length tolerance ≤±2.0 mm. Automatic control of quantity and cutting length. - Knife material: Cr12, precision processing, heat treated. - Power: 4 kW. Electrical standard: 380 V/50 Hz/3 PH - Control voltage: 24 V - Components include: PLC (Siemens), touch screen (Siemens), frequency inverter (Schneider), encoder (Omron), etc. - Option to add a mechanical or automatic decoiler.

Condition: good (used), Year of construction: 2010, functionality: fully functional, The complete line is fully operational. Electrical documentation is provided with the machine. Video available on request. Please contact me if you have any questions. Hfjdpspahg Hofx Ah Nsb

Condition: excellent (used), Sale of 4 complete roll forming lines + 1 spare part. Production of spacers and glazing beads made of aluminum and stainless steel. Modernized lines: two equipped with servo motors, the remaining with cardan shaft drive. Lines feature automatic loading, cutting, high-frequency welding, as well as automatic collection and packaging. Individual lines can be purchased separately. Freely selectable cardan shaft-driven lines at a price of €42,000 per unit / 2 units available. Servo motor-driven lines at a price of €95,000 per unit Hfsdpfxox Da A Ro Ah Nsb Quantity: 2 units PRICES FOR A PACKAGE OF 4 LINES + ONE SPARE LINE Price: €299,000 – catalogue price Price: €199,000 – special offer valid until 31 December 2025 Patents valid until 2033 and the HELIMA brand can also be acquired.

Condition: used, Year of construction: 2010, functionality: fully functional, Used longitudinal and transverse cutting line Manufacturer: Forstner Year of manufacture: 2010 Performance: 2.00 mm at 400 N/mm² Equipment: - Motorized 3-ton decoiler with pressing arm - Material lifting table - Control: Siemens PLC - Speed: 25 m/min - Standard feed shaft - Standard feed table automatic straightening unit: - Straightening rollers: Programmable (MOP) - Straightening shafts: Standard Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs Hfodsxvqzhepfx Ah Neb Cross cutting: - Guillotine shear Additional equipment: - Light barrier unit - Manual 500 kg decoiler - Recoiling unit . Photos are currently being taken at the customer. The machine can be inspected on site by arrangement (Stuttgart area). Dismantling will take place around February 2026. No guarantees or warranties on used machines.

Condition: new, functionality: fully functional, machine/vehicle number: NM0LKTP62BSR94836, mileage: 1,000 km, power: 389.81 kW (529.99 HP), fuel type: electric, empty load weight: 12,827 kg, maximum load weight: 14,173 kg, overall weight: 27,000 kg, tire size: 315/70 R22.5, tire condition: 100 %, axle configuration: 6x2, wheelbase: 4,750 mm, axle spacing: 1,350 mm, fuel: electricity, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 3, emission class: none, suspension: steel-air, number of seats: 2, total length: 10,530 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 52 m³, loading space length: 8,300 mm, loading space width: 2,480 mm, loading space height: 2,533 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, central locking, cooling unit, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, non-smoking vehicle, onboard computer, power mirror, retarder, seat heater, tachograph, tail-lift, tire pressure monitoring, traction control, NM0LKTP62BSR94836 - Reference 85231 - Warranty 2+0 years - High-voltage battery warranty 8 years or 400,000 km STANDARD EQUIPMENT: 2,470 Nm torque ▪ Continuous Power 310 kW (421 HP) ▪ Peak Power 390 kW (530 HP) ▪ 8T Front Axle Capacity ▪ 11.5T 2nd Axle Capacity ▪ 7.5T 3rd Axle Capacity ▪ 6-Bag Rear Air Suspension (C6AS) ▪ Disc Brakes Front and Rear ▪ Regenerative Braking Power 390 kW ▪ 4 Battery Packs – NMC ▪ Installed Battery Capacity 392 kWh ▪ Usable Battery Capacity 314 kWh ▪ Charging Type CCS2 – DC Charging – Up to 285 kW, 350A ▪ U-profile Chassis, High Strength, 7mm Thick ▪ 315/70 R22.5 Tyres ▪ 22.5x9.0 Steel Wheels ▪ Pre-Collision Assist ▪ Lane Keeping Alert (LDWS) ▪ Electronic Stability Program (ESP) ▪ Driver Alert System ▪ Moving-Off Information System (MOIS) ▪ Reversing Camera ▪ Blind Spot Information System (BLIS) ▪ Alcohol Interlock Preparation ▪ Traffic Sign Recognition ▪ Emergency Stop Signal ▪ Tyre Pressure Monitoring System (TPMS) ▪ Automatic High Beam ▪ Pre-Collision Assist with Pedestrian Detection ▪ Intelligent Adaptive Cruise Control with Stop & Go (iACC) ▪ EBS: Electronic Braking System with ABS & ATC (Automatic Traction Control) ▪ Differential Lock ▪ Multimedia System with 9” Touchscreen (DAB Radio, Bluetooth, USB (A-Type – C-Type), Apple CarPlay, Android Auto, Remote Control) ▪ Navigation ▪ Enhanced Sound and Thermal Insulation ▪ Air Conditioning ▪ High Voltage Water Heater (Wet Type) ▪ Axle Load Meter (air suspension only) ▪ Adjustable Steering Wheel ▪ Seatbelt Warning ▪ Electric Windows ▪ Air Suspension Height Adjustment via Remote Control ▪ Tinted Side Windows ▪ Premium Seat Fabric ▪ 2 Multifunction Keys with Remote Control ▪ Heated and Electric Side Mirrors ▪ Sideskirts ▪ 4-Point Independent Cab Suspension ▪ Power Distribution Unit ▪ Electrically Tilting Cab ▪ Rain Sensor: Automatic Wipers & Lighting ▪ 95Ah AGM Battery ▪ Electric Air Brake Compressor ▪ Smart Tachograph ▪ Medium Bumper OPTIONAL EQUIPMENT: Steerable Rear Axle ▪ 4,750 mm Wheelbase ▪ Aluminium Alcoa Wheels ▪ Spare Wheel ▪ LED Headlights ▪ Frigo Pack ▪ Side Protection Rails ▪ Refrigerated Truck Body by Carrosserie Matthys: Internal Length 8,350 mm; Internal Width 2,460 mm; Internal Height 2,530 mm; with LL2d and LL1d evaporator; Dhollandia underfloor liftgate 2T; Multi-temp, reinforced roof, side wall drainage; movable and foldable partition wall, with anti-compression hatch; side door in right wall, near the front, opens rearwards, 1000 x 2130 mm, with retractable step Discover our dealers via the website fordtrucksbelux.be Interested? Please feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl Hfodpfx Ahex Uzdgj Neb - Garage O.C.M. Srl - GTTS Jourdan SA - Herman Noyens Trucks NV - Marc Vansteenland BV

Condition: used, Year of construction: 2008, NP 693 | COMPLETE PET BOTTLING LINE Product: Still Water Output: 43,000 BPH Year: 2008 Cap: Corvaglia 29/26 Tanner Preform Hopper Preform Elevator Preform Orientator PET Blower: Model: Blowmax 24 Compressor AF Riedel Chiller KHS CIP Hfsdpfsx Tfq Uox Ah Nob KHS Innofill-NV PET Filling Monoblock Filler: 60 valves – mechanical Filling type: Gravity Capper (with elevator and cap orientator) Cap type: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labeler PE Year: 2021 Model: Simple cut flex CI 1120 30 Rotation direction: counterclockwise 30 electronic cam plates Roll feed station Bottle inspector Conveyor belts Douglas Shrink Wrapper Year: 2007 Model: m-75 Version: film launch Alvey 880 Palletizer Year: 1999 Type: Push System Pallet storage Lantech Pallet Wrapper Model: S1500 Wrapping type: Rotating arm Pre-stretch Code: NP 693

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch Hfsdpfexmiirjx Ah Neb d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Year of construction: 2003, condition: used, functionality: fully functional, CONTINUOUS HUMP BACK BRAZING LINE FOR STAINLESS STEEL TECHNICAL INFORMATIONS: - Type: Hump Back Mesh Melt Continuous Furnace Line - Process : Brazing (Stainless steel) Hsdpfxox Ux Sbo Ah Njfb - Total Length : 28.800mm - Heating Zone : 5200mm - Band width : 650mm - Band speed : Max. 1200mm/min Min : 100mm/min - Capcity : 420kg/h netto - Heating : With Natural gas - Total Heating Power : 400kW Brut - Heating Elements : x10 WS Burners - Controlled zone : 4 - Max Temp. : 1130 C - Athmosphere : Nitrogen / Hydrogen - Control : Demig / Siemens

Condition: excellent (used), A roll forming line with rollers for cold rolling office and storage cabinet fronts made of cold-rolled sheet metal. Roller center distance: 140 mm, Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The system is electrically operated. Hfodewxv H Djpfx Ah Nsb

Condition: new, Year of construction: 2026, Forstner COILFARM The COILFARM by FORSTNER is a new, innovative, and adaptable solution designed to meet the changing market demands for rapid, flexible availability of a wide variety of materials in different thicknesses and color variants. This is one of the main reasons why we have developed the COILFARM, specifically for metalworking companies in trade and industry. Key Advantages Hfsdex Ngumjpfx Ah Nsb High Capacity: With a storage capacity of up to 75 coils, a wide range of different materials, thicknesses, and color variants can be accessed immediately and without delay. This allows for the effortless handling of large-scale, simultaneous projects. Fast Coil Changeover: Thanks to a sophisticated system, coil changes are performed quickly, easily, and safely. We've integrated a coil buffer station above the nuSLIT as well as a changeover buffer station behind the decoiler. This significantly reduces changeover times and greatly increases overall production efficiency. Simple Loading Process: The well-thought-out machine design makes the loading process of the COILFARM extremely simple. The mandrels can be easily attached to the coil, and loading via the setup station increases your productivity. Maximum Precision: The integrated zero-line alignment (fixed edge) ensures that materials are perfectly aligned every time. This minimizes errors and scrap. Uncompromising Quality: Products from the CIDAN Machinery Group are manufactured without compromise. Our guiding principle in developing the COILFARM was to bring form and function into perfect harmony. 3-Minute Changeover: Stop and rewind, move the coil to the transfer position behind the decoiler, pick up the next coil above the nuSLIT, feed it in first and then set it on the decoiler—and the production is back at full speed. Coil weight: 5,000 kg Min. coil width: 400 mm Max. coil width: 1,270 mm Max. coil diameter: 1,100 mm Coil inner diameter: 380 – 550 mm Optional coil diameter: 460 – 630 mm Slitting capacity (with nuSLIT): 1.00 mm steel with 5 knife pairs Cross-cutting capacity (with nuSLIT): 1.0 mm steel Steel (400 N/mm²): 1.00 mm with 5 knife pairs Stainless steel (600 N/mm²): 0.80 mm with 5 knife pairs Aluminum (300 N/mm²): 1.20 mm with 5 knife pairs Max. storage capacity: 75 coils (with maximum diameter)

Condition: new, functionality: fully functional, machine/vehicle number: NM0LKXTP6LRC90705, mileage: 1,000 km, power: 242.71 kW (329.99 HP), fuel type: diesel, empty load weight: 12,428 kg, maximum load weight: 12,572 kg, overall weight: 25,000 kg, tire size: 315/80 R 22.5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 4,250 mm, axle spacing: 1,350 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,397 mm, total width: 2,550 mm, total height: 3,815 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 6,906 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, non-smoking vehicle, onboard computer, power mirror, seat heater, soot filter, spoiler, tachograph, tail-lift, tire pressure monitoring, traction control, NM0LKXTP6LRC90705 – Reference 78819 – Warranty 1+1 year Hfsdpfx Aex Uqz Uoh Njb STANDARD EQUIPMENT: Air conditioning ▪ Multimedia system with 9" touchscreen & navigation (Radio, Bluetooth, USB (A type - C type), Apple CarPlay, Android Auto, remote control) ▪ Cruise control ▪ Differential lock ▪ Disc brakes ▪ Engine brake ▪ Electronic Braking System (EBS) and Anti-lock Braking System (ABS) ▪ Electronic Stability Control (ESP) ▪ Hill Launch Assist ▪ Electrically operated windows ▪ Electrically adjustable and heated side mirrors ▪ Height and tilt adjustable steering column ▪ Electrically operated headlamp leveling ▪ Heated and air-suspended driver's seat ▪ Lumbar support ▪ Brake pad wear sensor ▪ Immobilizer ▪ Automatic light sensor ▪ Home safe light ▪ Approach light ▪ Front fog lights ▪ Digital tachograph ▪ Spare wheel ▪ Liftable rear axle (Auto drop function) ▪ DAB radio ▪ Advanced driver assistance systems (enhanced cybersecurity, rear view camera, departure information system, blind spot information system, tire pressure monitoring system, emergency stop signal, alcohol interlock facilitation, traffic sign recognition, driver alert system, lane keeping alert, pre-collision assist) ▪ Manually operated sunroof ▪ Single key with remote control and central locking ▪ Automated transmission (with various operating modes) ▪ Convertible air compressor (for improved fuel efficiency) ▪ Axle load indicator ▪ Rear fog lights ▪ 4-point independent cab suspension OPTIONAL EQUIPMENT: Technology Package 3: Automatic high beam headlights, Pre-collision assist with pedestrian detection ▪ Steerable rear axle ▪ Driver's seat armrest ▪ Front towing eye ▪ 8T front axle ▪ Electrically tiltable cab ▪ Window in rear cab wall ▪ PTO - NH4C ▪ LED headlights ▪ 4.375 FDR ▪ 315/80 Pirelli tires ▪ Distribution truck with tail lift up to top and side loading door – distribution version with tie rails – internal load bed length 6800 mm – internal load bed height 2.40 m – internal width 2.46 m – D'hollandia 2.40 m tail lift with 2,000 kg capacity – roll stops on the tail lift – tie rails in sidewalls – 1 side door – side underrun protection Discover our dealers on the website fordtrucksbelux.be Interested? Please feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl - Garage O.C.M. Srl - GTTS Jourdan SA - Herman Noyens Trucks NV - Marc Vansteenland BV

Condition: used, Year of construction: 2019, NP 692 | COMPLETE BOTTLING PET LINE KHS Product: Still water Speed: 70,000 BPH Hfodpfx Ahox Tfqzj Nob Year: 2019 Hopper Preform M. Tanner Preform Elevator Preform Orientator Compressor KHS InnoPET TriBlock PET Blower Labeller: Electronic cam plates 2 Stations Wrap-around roll fed Filler: 96 mechanical valves Capper (including elevator and cap orientator) Type of workable cap: pre-threaded plastic Distribution system: pick & place Bottle inspector Shrink wrapper KHS Model: Innopack Kisters TSP Version: film launch Palletizer FKI Logistek Model: A-910 Type: Push Pallet Storage Interlayer system Pallet wrapper Lantech Type of wrapping: Rotating arm Pre-stretch Code: NP 692

Condition: new, Year of construction: 2025, The Forstner POWER STRAIGHT PRO is the heavy-duty version of the STRAIGHT PRO. Even more massive straightening shafts guarantee a perfect straightening result even with thicker sheets. The straightening unit with its six straightening shafts is easy to adjust and guarantees flat blanks for further production regardless of the material type. The most important advantages: Hodsurtg Sspfx Ah Nefb Very robust construction 6 straightening rollers with automatic feed perfect straightening results easy to operate machine basic equipment: Roller infeed hopper feeding table Cross cut guillotine shears Touch control Speed 25 m/min Max. straightening and cutting capacity 2.00 mm at 400 N/mm² or 1.5 mm at 600 N/mm² Working width option1524 mm also available

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, warranty duration: 12 months, number of feed rollers: 1, Demonstration Machine Slit Cut 1250 mm Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized feed Longitudinal slitting with 5 pairs of knives with automatic infeed Crosscutting with rotary shear SPS1 control for automatic feed, longitudinal and crosscutting The Forstner SLIT longitudinal and crosscutting line is optimally suited for all sheet metal shops, drawing from years of experience. The system consists of a proven combination of traditional Forstner machines and can be combined with any manual or motorized decoiling unit. Key advantages: Hsdpfx Ahswy Hwpo Nsfb - The new design makes your SLIT line even better. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Simplest knife adjustment. Standard equipment: - Roller feeder hopper - Feeder table - 5 pairs of longitudinal knives - Crosscut rotary shear - SPS1 touch control - Speed: 25 m/min Cutting capacity in steel for longitudinal slitting: - With 3 pairs of knives: 1.5 mm - With 4 pairs of knives: 1.25 mm - With 5 pairs of knives: 1.0 mm