Used Saw Sharpening Machine for sale (66,244)

Condition: used, Vertical bandsaw PEHAKA, type SM 4 Manufacturer's No. 27060, year of manufacture approx. 1980 Overhang: 380 mm Table size: 620 x 480 mm Cutting height: 250 mm Roller diameter: 400 mm Working height: 1120 mm Itedpfxeiv A U Ee Ahben Saw blade length: min. 2900 - max. 3100 mm Saw blade speed: 22-125 m/min, infinitely variable Motor power: 0.6 / 0.75 kW Power connection: 380 Volts, 50 Hz - Infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds - Saw table tiltable +/- 15° - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - Base frame made of U-steel 100 x 50 mm, movable with a pallet truck Space requirement L x W x H: 1050 x 800 x 1950 mm Weight: 355 kg Good condition

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Itodpoy Ni Ayefx Ahbsn

Condition: good (used), Year of construction: 1993, Vollmer CABG Itodpfx Aezhi Svehben Gear grinding machine

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW Iodexph E Ropfx Ahbetn - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case Iedpfow D T Dkox Ahbotn T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: Itodpfxsyl Rm Rj Ahbjn measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6023, Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx.: - at 90° circular 140 mm - or rectangular 170 x 140 mm - Miter adjustable to the left and right 45 - 90 - 30° - Pneumatic saw blade feed - Pneumatic quick-release clamp - Pneumatic connection - Original machine base - Infeed roller conveyor 3000 mm - Outfeed roller conveyor with measuring stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm Itsdpfx Ahezrvfwobon - Machine weight approx. 150 kg

Condition: new, Year of construction: 2026, CORMAK HBS320 Metal Band Saw – Precision and Reliable Cutting The CORMAK HBS320 metal band saw is an efficient and professional solution for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal materials. Its robust construction, wide cutting angle adjustment range, and compatibility with material feeding equipment make it a versatile metal band saw for production and service applications. Main Advantages of the Machine - Cutting angles from -45° to +60° – enables mitre cutting in both directions without the need to reposition the material. - Powerful 1.5 kW motor – provides high power and stable operation, even when cutting hard materials. - Cast iron saw arm – resistant to vibrations and heavy loads, ensuring accuracy and long service life. - Precision blade guides – equipped with bearings and carbide inserts to extend blade life. - Safe operation – protective guards and safety microswitches protect the operator and stop the drive when necessary. - Cooling system with electric pump – improves cutting efficiency and facilitates chip removal. Construction and Technology Iodsi D Dgwepfx Ahbetn The metal band saw features a welded steel frame and a stable base with an integrated coolant tray. The cast iron saw arm ensures the rigidity of the entire cutting system. Cutting is performed using a gravity-feed system controlled by oil flow through a hydraulic cylinder. The quick-clamping vice and movable bed allow efficient and secure material positioning. The machine offers two blade speeds: 44 and 88 m/min, as well as stepless adjustment of the saw arm feed rate. Cutting Precision and Efficiency Thanks to its robust blade guiding system, the metal band saw maintains high cutting accuracy, even during intensive operation. The cooling system, equipped with a separate coolant tank and pump, helps reduce cutting temperatures and minimise blade wear. Automatic drive shut-off after completion of the cutting cycle prevents excessive wear of the drive components. Applications The CORMAK HBS320 band saw for pipes and profiles is designed for cutting structural steel, stainless steel, tool steel, copper, aluminium, and plastics. It is ideal for metalworking workshops, toolrooms, steel structure fabrication companies, and small-batch or custom production facilities. Standard Equipment - Quick-clamping vice - Hydraulic cylinder with adjustable descent rate - Coolant pump with collection tray and chip drainage system - Two-speed blade drive - Safety microswitch system Optional Equipment - Roller table extension Technical Specifications CORMAK HBS320 Metal Cutting Band Saw Parameter Specification Max. cutting diameter (90°) Ø 260 mm Max. rectangular cutting capacity (90°) 320 x 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Saw arm descent adjustment Hydraulic cylinder Blade dimensions 2740 x 27 x 0.9 mm Blade speed 44 / 88 m/min Vice height 920 mm Overall dimensions 1400 x 880 x 1550 mm Weight 280 kg

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) Ijdjyx S N Uepfx Ahbetn POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally Itodpeudi Uzefx Ahbjn 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Isdpfx Asu R S Dbshbetn Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: excellent (used), Band saw grinding and setting machine VOLLMER model BN30TS Ijdpfx Ahohhdaxebstn

Condition: new, Saw shaft and saw bush Tool shaft and clamping bush Iodpfxjnladhe Ahbjtn

Condition: used, Year of construction: 1994, workpiece diameter 110 mm Itsdst Hw Nmepfx Ahbon grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: good (used), Volmer CNE sharpening machine. Ijdpfx Aozxba Hshbotn

Condition: new, Year of construction: 2024, Exhibition Machine Year of Construction: 2024 Equipment and Technical Data: Iodpfew I Ummox Ahbotn Robust German engineering for trimming, cross-cutting, formatting, mitre cutting, etc. - Top-mounted control panel at eye level, swiveling, incl. fence guide - 7" touchscreen control for the electromotive positioning of cutting height, saw blade swivel adjustment, cut width stop and optionally for the height and side adjustment of the scoring saw Auto-EPS. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device that can be swiveled away on both sides, safety guard with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with a cutting width of 1250 mm, electromotive - Trolley with a cutting length of 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 adjustable folding stops and 1 end stop, simultaneously usable as an angle mitre stop on both sides, infinitely adjustable from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° fixable. - Push-button control with electronic soft start (start/stop) - Electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at the width stop 1250 mm, electromotive - Length stop on the cross slide extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table top 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction connection 120 mm on the machine body, 80 mm on the safety guard - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Trolley, length and width stop profiles anodized - Machine body and swivel arm powder-coated in anthracite RAL 7021, cladding sheet safety guard on top in violet blue RAL 5000, on the machine body in light gray RAL 7035 - Footprint: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the model, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Special equipment: Incl. scoring unit 0.55 kW, electromotive positioning for side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: Tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by incremental adjustment by 0.05 mm per step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 Incl. SWIVELING DEVICE FOR THE CROSS SLIDE Quick and ergonomic sliding into the parking position Incl. Length stop with digital display mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Iedpfx Aopl D Hxshbstn Tyop GA 250

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Itjdpfswqw Tvsx Ahbon Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: reconditioned (used), functionality: fully functional, Automatic pointer, completely overhauled. New pneumatic system. Itjdpfez D I Skex Ahbjn New electrical components. The unit is in working order; a test video is available.

Condition: good (used), Vollmer CA 300 Itsdpfx Ahofbgvbobsn complete with support stands

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, Itodou R Sx Ejpfx Ahbon pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: excellent (used), Catalog number 7757 TECHNICAL DATA Milling machine - spindle diameter 25mm - spindle height 120mm - interchangeable, tilting spindle (20 degrees) - spindle locking Isdpszr I E Ajfx Ahbetn - adjustable up/down - original guide - table dimensions 1120x750mm - 4 speed settings - motor 3.8Kw Circular saw - max. blade diameter 350mm - spindle diameter 30mm - blade adjustable up/down and at an angle - spindle lock - cutting width with guide 540mm - cast iron table - dimensions (L/W/H) 1260x900x1000mm - weight 610kg ADVANTAGES – Polish production – DTR documentation – used milling machine, very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Equipment: documentation/manual, RES 420 CUTTING SAW MAXIMUM CUTTING DIAMETER: 420 MM CUTTING CAPACITY ON THE FRAME: 420 MM Ijdpfezzdt Uex Ahbstn

Condition: excellent (used), Fully automatic band saw planing machine Oppliger Type PBS 860 Ijdpjd Sr Siefx Ahbetn

Condition: excellent (used), motor: 2.2 kW max. sharpening length: 710 mm feed motor power: approx. 0.37 kW Iedoz Afkqspfx Ahbstn blade guide adjustment: angular adjustable support: front/rear cooling: automatic: blade diameter: 125 mm