Used Saw Milling for sale (14,623)

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Lhjdefv Hphjpfx Ad Nob Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic Lhodpfswxmhlsx Ad Neb 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, Lhsdjtqt T Iepfx Ad Njb - electrical cabinet.

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station Ljdpfx Adoupt Sis Nshb - three head - for sawing pallet boards - feed chain - feed pushers from the top

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery Lhedpfx Aoh S Uhfed Neb PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type Lhjdpfxjb Rnv Se Ad Nob negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Lodped H Hmhjfx Ad Nehb Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos Lodpfx Adeq Hr Rzo Njhb - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing. Ljdpsw Nbhmjfx Ad Nehb

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. Lodpork Ipnjfx Ad Nohb The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour 4. weight: 2500 kg

Condition: ready for operation (used), Year of construction: 2025, operating hours: 57 h, functionality: fully functional, machine/vehicle number: 24111638, overall weight: 11,600 kg, cutting height (max.): 940 mm, table width: 1,050 mm, table length: 6,000 mm, Equipment: CE marking, Band saw from 2025 with only 57 operating hours! Sale due to business closure. TECHNICAL DETAILS Max. cutting height: 940 mm Table length: 6,000 mm Table width: 1,050 mm Saw orientation: Horizontal Lhsdsx Tpx Nepfx Ad Nsb MACHINE DETAILS Weight: 11,600 kg Protection: 100 A Total power: 51 kW Main motor power: 30 kW Operating hours: 57 hours EQUIPMENT Documentation CE marking CE certificate

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, stack height: 560 mm, working height: 920 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm Lift table width: 1,600 mm Working height: 920 mm Saw blade projection: 110 mm Program fence speed: 90 m/min Saw carriage speed: 130 m/min Max. stack height without pit: 560 mm Max. stack weight: 4 t MACHINE DETAILS Main saw motor: 13.5 kW Scoring unit motor: 2.2 kW Average air consumption: 210 Nl/min Transport packages: 8 pcs. Lhodex Tptmopfx Ad Njb

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 800457, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, The machine was completely overhauled in 2012. TECHNICAL DETAILS X-axis travel: 4,000 mm Y-axis travel: 3,400 mm Z-axis travel: 1,000 mm Column clearance: 2,000 mm Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size – longitudinal: 3,000 mm Table size – transverse: 1,500 mm Table load: 2 x 10 t C-axis swivel range: 0–360° (in 1° increments) A-axis swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS CNC control: Siemens 840D SL Axes: 5 controlled Lhjdpfx Adjx Uwnbe Nsb Total power requirement: 70 kVA Dimensions & Weight Space requirement: approx. 10,200 mm x 7,200 mm x 5,925 mm Machine weight: approx. 82 t EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm Note: The machine has already been dismantled.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Ledpfjx Updnsx Ad Nohb Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Ljdpfeyap Shox Ad Nehb Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, MORI SEIKI Horizontal CNC Lathe NLX2500Y / 700 (Year 2015) Mitsubishi M730BM (MAPPS) Chuck Size 10" Max. Swing dia. 920mm Turning Diameter dia. 366mm Center Distance 700mm Bar Capacity dia.80 C axis 0.001 degree X Axis Travel 260mm Z Axis Travel 795mm Y axis Travel +/-50mm Turret 12 ( 12 rotating Tools) Lhjdpfxox Ty Tde Ad Neb Power Tools 10,000rom Spindle 4,000rpm Tail Stock - programmable Chip Conveyor

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, DMG MORI Horizontal Turning Machine CTX -310V3 ecoline - Year 2010 Controller : MAPPS (Mitsubishi) Max swing dia.330mm Max swing over slide dia. 260mm Max. Turn dia. 200mm Length 450mm Chuck 8" Turret 12 (6 driven tools) C axis indexing Power driven Tools 4,500rpm Tool setter Lhjdpfx Adsx Ty S Tj Neb tail Stock Chip conveyor --- Video upon request

Condition: excellent (used), Year of construction: 2008, Manufacturer: KALTENBACH Type: KBC 350 NA Year of production: 2008 Dimensions (WxHxD): approx. 220x200x150 cm, with chip conveyor, 3 roller conveyors Dimensions: (WxHxD): approx. 220x80x60 cm, 2 of them with storage table. We also offer: 1. Kaltenbach KMR 100 AP 2008 (304096) 2. Kaltenbach KBC 350 NA 2008 (304133) Ljdet Ia Syspfx Ad Nehb 3. Kasto SSB 260 VA-CNC 2002 (6510 115 305) 4. Kasto SBA 280 AU 1998 (6406 102 056) 5th Kasto HBA 420 AU 1985 6th Kasto HBA 420 AU 1995 (6019 107 306) 7th Kasto HBA 420 AU 1995 (6019 159 107) 8th Kasto, type SSB 260 VA, year of construction 1994

Condition: excellent (used), Manufacturer: KASTO, type: SBA 280 AU, year of manufacture: 1998, serial number: 6406162056, weight: 1750 kg, with hydraulic clamp, chip conveyor and operating display, dimensions (width x height x depth): approx. 220x200x220 cm, 3 roller conveyors approx. 100x60cm Ljdpfx Ast Ia Uhsd Nohb

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1250 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar Lhedpfxewlwhcj Ad Nsb ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Ledew Sadrspfx Ad Nshb

Condition: ready for operation (used), controller manufacturer: ECS AZ 200 CNC, empty load weight: 8,500 kg, 5 assen simultaan Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 750 mm Max travel Z-axe: 700 mm Power on spindle: 2.2 kW Admission in boring head (ISO): ISO-40 Spindlespeeds: 80 – 3600 rpm ACCESSORIES & TOOLING: yes Coolant pump: yes Ljdpsycy Edsfx Ad Nshb Toolholder: yes Number of tools: 24

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Lhsdjwxz D Ujpfx Ad Neb Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: ready for operation (used), empty load weight: 7,000 kg, + 3 freeskoppen Ledpoycy Ekofx Ad Nohb Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Table size: 2000 x 600 mm Digital screen: Heidenhain 3 axes

Condition: used, Year of construction: 2008, x-travel 610 mm y-travel 510 mm z-travel 610 mm Control Ultimax Spindle nose - table 150 - 750 mm surface area 760 x 510 mm spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 24 Pos. Feed ( x / y / z) 7.600 mm/min rapid traverse ( x / y / z ) 35/35/30 m/min Lhjdpfx Adeycxkfs Neb In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.