Used Saw Machine for sale (91,731)

Condition: good (used), Year of construction: 1998, functionality: fully functional, BMSO Fully Automatic Band Saw Cutting capacity (round material): up to Ø 250 mm Cutting capacity (flat material): up to 300 mm Automatic material feed: The machine automatically feeds the material to the set length and cuts the pre-set number of pieces. Weight: approx. 600 kg Dimensions (L × W × H): 2000 × 1050 × 1500 mm Financial information VAT/margin: Margin: The listed price includes VAT (VAT not deductible for businesses) Iedpoxmbdbjfx Afijbc

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Ibsdpfx Afjudi Unoisc Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data to follow Location: Flörsheim Ibedpfxsxfc R To Afisc Availability: short term

Condition: used, Year of construction: 1974, Technical details: Iodpfx Afewqplkeijbc total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: ready for operation (used), functionality: fully functional, sliding table length 1500mm scoring unit fence with angle regulation max blade diameter 300mm spindle diameter 35mm spindle speed 3/4.5/6/8 tys. RPM connection 380V Iedpfxsxhd Ais Afisbc

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Ijdpfxsw Iwaio Afiebc Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm.

Condition: good (used), functionality: fully functional, BOMAR STG 320 GA Fully automatic bandsaw machine Cutting capacity 90° diameter 320mm, flat 510x320mm 45° diameter 320mm, flat 310x310mm 30° diameter 230mm, flat 210x210mm Continuously adjustable forced hydraulic sawing pressure Automatic cutting pressure compensation Feed clamp stroke of 600mm Entry of up to 99 different lengths and quantities via keypad Hydraulic material clamps (clamp moves full stroke) Separate coolant unit Continuously variable sawing speed 20-90 m/min, digitally displayed Machine dimensions 2400x1800x1800mm Machine weight 1300kg Year of manufacture 2001 Ibodpfsxmba Aox Afioc Financial information VAT/margin: Margin: The displayed price includes VAT (VAT is not deductible for businesses)

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 Iodpfjvuf S Nsx Afiobc 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Iodpfourkypsx Afiebc Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: good (used), Year of construction: 2009, functionality: fully functional, cutting range round steel at 90°: 300 mm, - Saw band dimensions: 3660 x 27 x 0.9 mm - Max. cutting range round: 300 mm - Max. cutting range flat: 320 x 220 mm - Roller feed with electric length stop up to approx. 800 mm - Incl. roller conveyor approx. 4 m Ibjdpfx Afoxgbq Uoiec

Condition: good (used), Year of construction: 2006, Immediately available - affordable Hydraulic Band Saw Automatic Manufacturer: Kasto Model: TWIN A 2 Year of manufacture: 2006 Length: 1,755 mm Width: 2,475 mm Height: 1,570 mm Total weight approx. 1,700 kg Total drive power 5 kW Saw motor drive power 3 kW Cutting range Ø 260 mm Cutting range, flat (W x H): 260 x 260 mm Smallest round dimension Ø 10 mm Square, H x W: 10 mm Maximum single feed length: 750 mm Multiple feed up to: 9,999 mm Shortest cut-off length: 6 mm Smallest diameter to be cut: 10 mm Minimum remnant in single cut: 15 mm Shortest remnant length in automatic mode: 100 mm Cutting speed, steplessly adjustable: 20 - 100 m/min Iedpsxdag Nsfx Afisbc Saw blade dimensions: 4,530 x 34 x 1.1 mm Material support height: 700 mm Cutting feed: steplessly adjustable Data subject to verification Comes with: • Floor pan (under the machine) • Chip conveyor • Operating manual • Additional machine table (support) in front of the unit Immediately available ex stock 78234 Engen

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Ibsdpfxoq S Uwbo Afiec Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used

Condition: good (used), Year of construction: 2003, functionality: fully functional, - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Mitre range 90° to 30° - Bundle clamping width/height: 0-500 mm / 15-335 mm Ibsdpfxoxg Hr Ds Afisc - Material feed single/multiple: 0-600 mm / 0-9999 mm - Remnant length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min - Cutting pressure: stepless hydraulic adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Power supply: 3x 400 V / N / PE / 50 Hz - Nominal current: 16 A - Machine weight: approx. 1700 kg - Machine dimensions W x H x D: approx. 2500 x 1900 x 2300 mm

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Ijdpfxoudi Uze Afiobc Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base Iedpewb Hxvsfx Afiebc - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, Year of construction: 1977, functionality: fully functional, Saw blade sharpening machine Schmidt ASG 500 A - Good used condition Iedpfxowwky Ae Afiobc - Year of manufacture 1977

Year of construction: 1985, condition: good (used), Offer 21135 Technical data: - Roller diameter 420 mm Isdpfx Asg Aid Sefisbc - throat 410 mm - max. passage height 265 mm - table size 600 x 600 mm - table left + right tiltable 15 / 30 ° each - table height from floor 1020 mm - saw blade length 3150 - 3260 mm - saw blade width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - drive 400 V / 1,1 / 1,7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm - E. foot switch

Condition: excellent (used), CATALOG NO. 5992 TECHNICAL DATA Milling machine - Spindle diameter: 30mm - Spindle height: 120mm - Interchangeable, lockable spindle - Height adjustable (up/down) - Original cast iron fence with full adjustment - 4 spindle speeds + forward/reverse - Table dimensions: 1140x910mm - Motor: 4kW Circular saw - Max blade diameter: 270mm - Spindle shaft: 30mm Iedpew Emvcefx Afisbc - Height adjustable blade (up/down) - Blade guard - Cutting width at fence: 370mm - Cast iron table - Motor: 1.85kW - Dimensions (L/W/H): 1070x1450x1040mm - Weight: 662kg Net price: 6900 PLN Net price: 1620 EUR depending on exchange rate of 4.25 EUR (Prices may change with higher fluctuations)

Condition: good (used), Year of construction: 1991, Saw Blade Chamfering Machine Manufacturer: Loroch Isdpfxehwixde Afiobc Model: AK Year of manufacture: 1991 For chamfering HSS and segment saw blades

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 2 with fine adjustment 1. saw cut aggregate Random System: saw cut optics 2. brush : Tynex brush, grain 80, diameter 220mm Height adjustment : Handwheel height indication: mechanical counter Feed rate: 4 - 12 m/min Motor power saw-roughness: 1,1 kW Motor power brushes: 3 kW Motor power feed: 0,37 kW Machine length: 1400mm Iedegrladspfx Afiebc machine width: 1400mm Weight: 550kg

Condition: used, Horiz. Mitre bandsaw KNUTH with minimum quantity lubrication type HB 250A Bandsaw for metalworking with swivel saw frame. Serial no. 201603004 Year of manufacture 2016 Sawing range at 90° round Ø 225 mm Sawing range for 90° square 190 x 190 mm Sawing range for 90° rectangle 245 x 150 mm Sawing area at 45° round Ø 145 mm Sawing area for 45° square 145 x 145 mm Sawing area for 45° rectangle 200 x 145 mm Sawing area at 60° round 90 mm Sawing area at 60° square 90 x 90 mm Sawing area for 60° rectangle 110 x 70 mm Saw band 2480 x 27 x 0.9 mm Roller diameter 290 mm Belt speed 45 / 90 m/min. Compressed air requirement approx. 5 bar (minimum quantity lubrication) Working height 910 mm Motor power 1.1 kW Connected load 400 Volt, 50 Hz - Saw blade speed via 2-stage electric motor - Infinitely variable lowering via hydraulic lowering cylinder - Automatic limit stop after material average - Infinitely variable swivel saw arm for mitre cuts up to 60° - Pressure gauge for band tension - Vice with short-stroke quick clamping device Ibedpjrvm Npofx Afisc - Coolant device with electric pump - Minimum quantity lubrication UNI-Microspray I (year of manufacture 2017) - Workpiece stop Space requirement L x W x H 1450 x 700 x 1450 mm Weight 185 kg Very good condition

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame Ijdpswpincefx Afisbc - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Ibjdpfshwrp Rjx Afijc Motor power feed: 0,37 kW Machine length: 2800mm machine width: 1500mm Machine height: 1600mm Weight: 1500kg

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control Ieded Aai Tspfx Afisbc -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm Ibodjq Evn Ejpfx Afiec - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg