CNC SAWING / DRILLING SPLIT SYSTEM LINE

VOORTMAN V630 / VB1050

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm Ledjhzbipjpfx Aagehc - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, workpiece weight (max.): 12,000 kg, travel distance X-axis: 1,900 mm, travel distance Z-axis: 1,400 mm, spindle motor power: 100,000 W, spindle speed (min.): 60 rpm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, turning diameter over cross slide: 2,200 mm, turning diameter: 2,200 mm, total height: 2,000 mm, feed rate X-axis: 8 m/min, Equipment: rotational speed infinitely variable, Machine Fresh from production Test and quaility controlled next 6 weeks Manufacturing year 2025 Lsdpfevc Ei Rsx Aagohc WAIT FOR OFFERS

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, pressure: 7 bar, Complete system consisting of 3 units of AKS 6400 4-head welding machines and 2 units of AKS 6600 4-head welding machines plus 2 units of SV 800/4 CNC weld seam finishing machines, including chip extraction system. Lodpow Etv Aefx Aagohc

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 36, table length: 2,200 mm, table width: 850 mm, controller model: OKUMA-OSP-HMI, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 36, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: BT 50, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, table load: 2,500 kg, tool diameter: 120 mm, tool length: 400 mm, tool weight: 20 g, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Lodpfx Aju Dinkoagjhc

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit with longitudinal movement (X-axis), adjustment range 0 - 15,000 mm, and an automatic tool changer with HSK A80 interface for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: • Support for profiled and flat steel with guide rail and fixed table, total length 15 m • Mobile drilling unit for longitudinal positioning along workpieces • Horizontal drilling head with single drill spindle • Additional tool storage in the X-axis direction • Clamping system for securing materials • Position detection device • Maximum profile size: 1200 x 1200 mm • Number of drill spindles: 1 • Drilling diameter: 5 - 40 mm Lodpfx Aaev Iamzogohc • Tapping: M6 - M30 • Drill spindle speed: 180 - 3000 rpm • Holder: HSK A 80 • Tool changer: 1 x 6 For more information, please contact us.

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. Lodpfxjvxfkae Aagshc STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Recommended options: Powered chip brush synchronized with blade speed Lhedpeh Tnd Asfx Aagec Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Lhodpfev U Ea Hox Aagoc Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle Lodpfx Asxmvm Reagjhc LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) Lodpfowbil Sox Aagjhc ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.