Used Salt Spray Chamber for sale (4,959)

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C Lsdpfsva Hi Hjx Adkorw 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone. Lsdexb Dm Ijpfx Adksrw

Condition: good (used), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at the center of the usable test volume: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Temperature change rate: Ljdpfxswynmxo Adkjrw - Heating: 11 K/min - Cooling: 10.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at the center of the usable test volume: ±0.2 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at the center of the usable test volume: ±1 to ±3 % RH Technical Data: - External dimensions (with hinges and door lock): - Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm - External dimensions (without hinges and door lock): - Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm - Internal chamber dimensions: - Height: 950 mm, Width: 1100 mm, Depth: 950 mm - Test chamber volume: approx. 1300 liters Feedthroughs: - The chamber is equipped with feedthroughs on both the right and left sides, allowing measurement cables and test devices to be routed into the test space. - 1 x R1 NW 125 mm - 1 x L1 NW 50 mm Test Chamber Lighting: - Halogen bulb 24 V, 50 W Electrical specifications: - 3/N/PE AC 400V ±10% 50Hz - Rated power: 34.0 kW - Rated current: 50.0 A - Fuse (to be provided on site): 100 A slow-blow - Max. heat emission to environment: 2.2 kW Permissible Test Specimen Weight: - Total load on grate supports: 100 kg - Chamber floor: 150 kg; Inserted rack: 50 kg Refrigerants: - R 404A / R 23 Weight: 1600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Condition: used, Vötsch Model: VC 0018 Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Width 580 x Depth 450 x Height 750 mm External Dimensions: Width 865 x Depth 1150 x Height 1780 mm Test Chamber Volume: approx. 190 liters Specifications for Temperature Testing: Temperature Range: -10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.5 K spatial: ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation in the range +20°C to +50°C: 200 W Calibration Points: +4°C and +90°C Specifications for Climate Testing: Temperature Range: +10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.3 K spatial: ±0.5 to ±1.0 K Humidity Range: 10% to 98% RH Electrical Connection: Rated Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 1.7 kW Rated Current: 9.5 A (neutral conductor plug loaded), Schuko approx. connection cable: 3.5 m Protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R 134A For your safety as a buyer, please note the following information! The following points are carried out on all climate chambers we offer prior to delivery: Lsdpfx Ajw Hz S Uedkorw 1. Functional check and replacement of necessary components 2. If necessary, a refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors are excepted!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Lrjdpfx Adjun Rulskew Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7027-15 Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Rate of Change: Temperature Deviation Temporarily ± 0.3 to ± 0.8 K Lrsdpfewl Argsx Adkew Temperature Deviation Spatially ± 0.5 to ± 2.0 K Cooling Rate of Change: 18.0 °C Heating Rate of Change: 17.0 °C Test Chamber Dimensions: Width 580 x Depth 620 x Height 950 mm External Dimensions: Width 870 x Depth 1895 x Height 1775 mm Side Ports: 1 x 60 mm Ø and 2 x 120 mm Ø Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 16 kW Rated current 31 A Refrigerant R452A / R23 Approx. 270 liters Weight: 835 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Lrodpfx Aovzz A Rjdkjw Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Temperature calibration value +23°C and +80°C Capacity for climatic tests: Lrsdpfx Adjv Tnd Sjkjw Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Ljdpjwh Ttmefx Adksrw Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 litres Performance for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate Lrsdpfxsxgd Rde Adkow 4. After successful inspection, the chambers undergo a documented trial run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Type: ClimeEvent C/340/70/3 Climate test chamber, air-cooled Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm Overall dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Key parameters for temperature testing: Temperature range: -40°C to +180°C Temperature change rate, cooling: 4.0 K/min Temperature change rate, heating: 3.2 K/min Key parameters for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 20% to 90% r.h. Temporal temperature deviation (within working space): ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.0 K Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated output: 4.1 kW Ledsxn Swuopfx Adkjrw Rated current: 14.0 A Refrigerants: R449A & R23 Test chamber volume: approx. 335 litres Net weight: approx. 520 kg For your security as the buyer, please note the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in the technical data and specifications reserved!) For further questions, feel free to contact us by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation in time K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Lrjdpfx Aeuxq T Dodksw Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Lodpfxevba Ras Adkerw Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Lodolgux Aopfx Adksrw Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machines Conveyor spray processing machines FAPC 3000 The new FAPC have been developed to be used with the latest development, Etching and abating chemistry for the production of printed circuits, metal signs and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Lrsdpjd R Trkofx Adkow Process chamber 450mm Water rinsing chamber 280mm Spray rods - Top 4 process chamber, 1 rinsing chamber Spray rods - floor 4 process chamber, 1 rinsing chamber Nozzle type Poly v-jet - 1/4 revolution removable Nozzles per pipe 3 + 4 for process, 4 for rinsing Nozzles Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control Adjustable over the entire range from above and below. Conveyor speed control High torque. AC drive motor system, powered by a precision inverter with digital displays, for a precise operator reference Speed range 45 mm - 1.6 m / min Temperature range Ambient temperature up to 50°C -1°C Temperature Controller Digital Liquid level sensors For heating and pump Manual reset of overtemperature protection Voltage 220 / 240V 50Hz (13A plug) Dimensions: Height 670mm Depth 670 mm Length 1430mm including collecting bowl Type: FAPC 3000 Condition: used / used Scope of delivery: (See picture) (Changes and Ir

Condition: excellent (used), Here we offer a temperature test cabinet. Water cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x height 2100 mm x depth 2250 mm Lredpjmn Rcijfx Adkew Test chamber dimensions: Width 840 mm x height 840 mm x depth 840 mm Unit part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature test chamber, water-cooled Performance data: With temperature change rate of 25 K/min Test chamber dimensions Height 750 mm Width 580 mm Depth 615 mm External dimensions Height 1775 mm Width 780 mm Depth 1895 mm Temperature range -72°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 Temperature homogeneity in space ± 0.5 to ± 2.0 Temperature change rate cooling 25 K/min Temperature change rate heating 25 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 270 liters 2x lateral feed-through ∅ 125 cm 1x side feed-through ∅ 50 cm Cabinet is water-cooled Test room lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate Ljdpetz Rqmofx Adkjrw 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC³ 0100 Vötsch climatic test chamber, air-cooled Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Test chamber 990 liters Temperature tests: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate cooling 0.2 K/min Temperature change rate heating 0.5 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Heat compensation at +20 °C 350W Climatic tests: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range +4°C to +89.5°C Lsdpfjtz T D Asx Adkerw Humidity range 10 to 98% r. h. Humidity deviation over time ± 1 to ± 3% r. h. Temperature deviation temporal ± 0.1 to ± 0.3K Temperature homogeneity in space ± 0.5 to ± 1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick / Roell Temperature chamber for AllroundLine Here we offer you a Zwick / Roell temperature chamber for AllroundLine. Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. External dimensions: Depth 1050 mm Width 600 mm, Height 800 mm Lodpfx Adsk Rutpokerw Internal dimensions: depth 530 mm width 450 mm, height 650 mm Temperature chambers for the AllroundLine Cooling by means of LN2(liquid nitrogen) -80°C connection to external, is not included) Type: EC75A-1-0-1-0 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climatic test chamber Technical data: Test chamber nominal volume 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width 2970 mm Height 2370 mm Depth 1530 mm Rear wall Minimum insertion dimensions: Width 2970 mm Height 2390 mm Depth 1550 mm Test chamber: Width 2000 mm Height 1000 mm Depth 1000 mm Double-leaf door, clear width Width 2000 mm Height 1000 mm Heated viewing window, 2 pieces Width 500 mm Height 600 mm Feed-through opening, 1 side panel left ∅ 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature difference, temporal ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in the supply air without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Lrsdpfx Aek E Hnqsdkow Humidity range: 10...95 %r. F. Humidity difference, temporal ≤ ± 3.0 %r. F. Dew point range, temporary down to -5... 95°C Refrigeration system: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Air conditioning and dryer refrigeration system air-cooled /hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical mains connection: 400V 3/N/PE.AC,50Hz Mains plug: CEE 5-роlig, 32 A, with 5.0 m cable Max. simultaneous power requirement 10.0 kW Supply line fuse: 3x 25, Char, C A Degree of protection IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Ledpoun Rv Nofx Adkorw Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber air-cooled The chamber has the option for an external test box with external sensor connection can therefore also be used as an external temperature control unit. Temperature range -20°C...+140°C Temperature stability over time ± 0.1°C...± 0.3°C External dimensions Width 860 mm x depth 1500 mm x height 2100 mm Test chamber dimensions width 601 mm x depth 545 mm x height 692 mm Electrical connection 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max.17) A Rated power: 5.2 (max.9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Lredpsnyh T Sjfx Adkjw Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Here we offer an Espec(ThermoTec) stress test chamber. Overpressure humidity tests at over 100 degrees in many different modes Program capacity of 10 patterns with 30 steps per pattern A variety of protection mechanisms; overheat/overpressure protection, detection of water- supply failure.Complete door interlock and temperature sensor. Saturated Temp Range 105 to 142.9°C Unsaturated Temp Range 105 to 132.9°C Humidity range 50 to 100% r.h. Nominal pressure 0.196 MPa at 132.9°C and 100% e.F. External dimensions: width 740 x height 1553 x depth 1000 mm Test chamber dimensions: Width 355x Height 355 x Depth 426 mm Ledpfxjn Arzns Adksrw Other equipment: with rails and grid Test material connections in the interior Type: EHS-221M Scope of delivery: See pictures 300 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch shock test chamber Here we offer you a Vötsch shock test chamber. Water cooled Temp. range -80C to +220C Hot chamber +50 to +220 Medium chamber -10 to +90 Cold chamber -80 to +70 Mains voltage 400V +-10% 3/N 50Hz Rated current 30.5 A Rated power 13.5 KW Lrjdpjn Avcuofx Adksw Refrigerant VK : R 404A 3.00kg p*: 25bar Refrigerant TK : R23 15bar p* : 25 bar Condition: used / used Type: VT 7012 S3 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Ljdpfx Adop Dun Ujkjrw Temperature deviation in time in center of chamber ± 0,1 to ± 0,5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11,5 kW Rated current 22 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 840 kg Type: WT11-1000/40 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.