Used Sales Counter for sale (24,921)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,915 mm, total width: 1,985 mm, overall weight: 6,550 kg, controller manufacturer: SIEMENS, product length (max.): 3,857 mm, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D Control touchscreen with ShopTurn 15 inch display • 6-axis configuration with driven tools, Y-axis and sub-spindle • Main and sub-spindle as built-in motor spindles • Cylindrical roller bearing, accuracy class P4, lifetime lubrication • Main spindle chuck diameter 255 mm • Sub-spindle chuck diameter 175 mm • Hollow clamping device, hydraulically actuated • Hollow clamping cylinder • 24-station tool turret (BMT65P interface) • Automatic tool measuring arm, electrically swiveling • Dynamic spindle speed control • Counter spindle with tailstock function • Coolant flow max 448 L per minute • Oil flow 336 L per minute • Electronic safety clutch for X and Z axes • Working area swing over bed 780 mm • Swing over cross slide 630 mm • Max turning diameter 255 mm • Max turning length 760 mm • Bar capacity 76 mm • Max workpiece weight including chuck 250 kg • Main spindle bore 91 mm • Max torque approx 706 Nm • Sub-spindle bore 52 mm • Spindle speed up to 6000 rpm • Motor power approx 18.5 kW • Torque approx 118 Nm • C-axis main spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 1508 Nm • C-axis sub-spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 121 Nm • Turret: 12 driven tool stations out of 24 • Max driven tool speed 5000 rpm • Driven tool power approx 7.5 kW • Driven tool torque approx 50 Nm • Rapid traverse X and Z approx 30 m/min; Y approx 10 m/min • Bed angle 30° • Coolant tank capacity approx 220 liters • Coolant pump pressure 7 bar • Hydraulic tank approx 20 liters • Central lubrication automatic system • Electrical connection AC 380 V, 3-phase, 50/60 Hz • Total power approx 69.27 kVA Additional equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction system Ncedjy E Izaspfx Afaer • Boring bar holders, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Reducing sleeves set: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • U-drill reducing sleeves: 40/20, 40/25, 40/32 • Two Eppinger driven tool holders BMT65P, straight, with external cooling Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 23,197 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details. Njdpfxjy Ey U Ej Afaecr • Number of Turrets: 2 • Tools per Turret: 12 stations, VDI25, all driven • Number of Cross Slides: 3 • Sub-Spindle: Yes • Max Turning Diameter: 50 mm • Max Turning Length: 550 mm • Sub-Spindle Speed: max. 5000 rpm • Sub-Spindle Power: 11 kW • Driven Tool Speed: max. 6000 rpm • X1/X2 Axis Travel: 160 mm • Z1/Z2 Axis Travel: 550 mm • Y-Axis Travel: ±40 mm (Turret 1) • Rapid Traverse Speed: 30 m/min • Electrical Connection: 34 kVA • Max Current: 135 A • Spindle Hours: 23,198 h Additional equipment • Tool holders • Driven tools • Collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, number of axes: 6, This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details. • Condition: Demo machine • Running hours: 173 hMachine configuration • Twin turret configuration • Y-axis on both turrets • Sub-spindle included • Main spindle + sub-spindle complete machining • Twin turret simultaneous machining • Dual Y-axis capability • High productivity turning center • Bar work compatibleControlled axes • 9 controlled axes • X1 / Y1 / Z1 • X2 / Y2 / Z2 • C1 main spindle • C2 sub spindle • A-axis (sub spindle movement)Axis travels • Upper Turret (X1 / Y1 / Z1) • X1 travel: 190 mm • Y1 travel: 90 mm (±45 mm) Nodpfx Asy Ex E Ajfaecr • Z1 travel: 660 mm • Lower Turret (X2 / Y2 / Z2) • X2 travel: 160 mm • Y2 travel: 90 mm (±45 mm) • Z2 travel: 660 mm • Sub-Spindle (A-axis) • A-axis travel: 660 mmMain spindle • 3-jaw chuck: Kitagawa BB206 • Collet chuck: SMW PPBE-42Sub-spindle • 3-jaw chuck: Kitagawa B206 • Collet chuck included (SMW)Machining features • Driven tools included • Simultaneous upper + lower turret machining • Turning / milling / drilling in one setup • Front and back side complete machining • Part transfer between spindlesCoolant / functions • High pressure coolant: 9 bar • Abnormal load detection function • Raku-Raku monitor controller optionIncluded tooling • Static toolholders included • 2 pcs axial rotary toolholders Additional equipment • Bar feeder interface • Remaining bar discharge device • Workpiece unloader with conveyor • Chip conveyor included • Manual tool setter Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: 0i PLUS, product length (max.): 2,805 mm, number of axes: 3, This 3-axis DOOSAN LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details. • Condition: New, 0 operating hours • Control unit: FANUC 0i PLUS with 15” touchscreenCapacity • Chuck size: 6 inch • Max. turning diameter: 300 mm • Max. turning length: 510 mmAxes / Travels • X-Axis rapid traverse: 30 m/min • Z-Axis rapid traverse: 36 m/min • Number of linear axes: 2 (X / Z) • C-axis: Spindle positioning for milling and drilling operationsMain spindle • Max. spindle torque: 127 NmSub-spindle • Sub-spindle: Yes • Max. sub-spindle speed: 6,000 rpmTurret • Turret stations: 12 / 24 • Rotary tool speed: 6,000 rpmIntegrated options • Automatic tool setter • High-pressure coolant system: 7 bar Additional equipment • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor Technical Specification Counter Spindle Yes Driven Tools Yes Nedpjy Ex A Uofx Afascr

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,426 h, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, overall weight: 4,200 kg, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 31i, number of axes: 8, This 8-axis DMG MORI Gildemeister Sprint 20/8 Linear was manufactured in 2016. It features a maximum bar diameter of 20 mm for both the main and counter spindles, with a maximum spindle speed of 10,000 rpm. The machine includes a coolant tank capacity of 250 liters and a robust tool programming system. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister Sprint 20/8 Linear swiss type turning machine we have for sale. Contact us for further details. • Control / CNC: Fanuc 31i with 15" TFT color monitor • CNC system: Fanuc 31i • Axes: 6+2 axes / total 8 axes • Y-axes: 2 • Channels: 2 • Spindles: 2Spindle data • Max bar diameter counter spindle: 20 mm (25 mm optional) • Counter spindle speed max: 10,000 rpm • Counter spindle power (S1): 3.7 kWTravels / strokes • Stroke Z1: 80 mm • Stroke Z2: 300 mm • Rapid traverse Y1: 40 m/min (30 m/min) • Acceleration max X1: 10 m/s² • Feed force S1 axes Z1 / Z2 / X2 / Y2: 250 daN • Feed force S1 axis Y1: 500 daN • Feed force linear axis X1: 60 daNSlide 1 • Stroke X1: 50 mm • Stroke Y1: 350 mm • Tool positions: 6 positions, 12x12 mm • Driven tools: 5 incl. spindle ESX16Slide 2 • Stroke X2: 240 mm • Tool positions external: 4 positions, 12x12 mm • Tool positions internal: 4 positions, Ø20 mm Ncsdsy Exttjpfx Afaor • Driven tools: 5 with ESX/16 (option)Coolant • Coolant type: Emulsion • Coolant tank capacity: 250 l • Coolant pump capacity max: 120 l/min • Coolant pressure: 1.5 barElectrical data • Electrical connection: 400 V ±10% • Frequency: 50 Hz • Fuse: 100 A • Control voltage: 24 V DC • Lighting voltage: 24 V DC • Rated current: 86 A • Power requirement: approx. 56 kVA • Network type: TN-S requiredProtection / operating conditions • Protection class machine: IP67 • Protection class electrical cabinet: IP54 • Ambient temperature: +10 to +35 °C • Max humidity: 75% • Installation altitude max: 1000 m • Noise level:

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, DGUV certified until: 05/2027, cutting width (max.): 25 mm, type of input current: three-phase, total length: 750 mm, total width: 800 mm, total height: 860 mm, control voltage: 24 V, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, year of last overhaul: 2026, space requirement height: 860 mm, space requirement length: 750 mm, space requirement width: 800 mm, Bread slicer circular knife machine Wabäma model: R 400 EX The all-rounder among the bread slicers EX model for installation in the sales counter! Max. number of discs: 140 pieces/min. Ncjdpem Tr Hwefx Afajr max. bread dimensions: 420 x 320 x 140 mm, WxDxH Round knife machine with bread halving Circular knife made of high-quality Teflon special coating machine mobile Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 750 x 860 mm, WxDxH Used machine cleaned with 6 months warranty We have a TOP selection of bakery machines!

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, number of axes: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details. • Main features: • Main spindle + sub-spindle • Y-axis for multi-tasking operations • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workholding/Capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Key advantages: • Y-axis + sub-spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for serial production • Automated part handling → increased productivity Additional equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20–50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5–65 mm • Chip conveyor (belt type, side discharge) • Parts catcher for sub-spindle • Oil skimmer • High-pressure coolant system (5–7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light • Parts handling arm (for sub-spindle unloading) Nodpfxoy Epi As Afaocr • Tooling package: • 2x straight driven tool holders • 2x angular driven tool holders • 1x extended angular holder • 1x set of turning tool holders Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 360 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis SPINNER TC800 110 SMCY was manufactured in 2016. It features a maximum X-axis travel of 360 mm and Z-axis travel of 900 mm, along with a sub spindle and live tool capabilities. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 110 SMCY horizontal turning machine we have for sale. Contact us for further details. Njdpfxsy En Awo Afascr • Tool setter Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck: 500 mm Technical Specification Nodpfxjy Enyio Afajcr Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Nedpfx Afey Enr Eoascr Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. • Chuck diameter: 400 mm Technical Specification Counter Spindle No Ncedpfjy Enqnex Afaer Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck diameter: 500 mm Technical Specification Ncedpfx Afoy Enlleaor Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a turning diameter of 400 mm. It is equipped with a live tool for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. Ncjdpfsy Enhasx Afajr • Chuck size: 400 mm Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features a maximum workpiece diameter over bed of 315 mm and a turning length of 340 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. • Internal taper: Metric 90 Nodpfxey Em A As Afaocr • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum workpiece diameter over bed: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Additional equipment • Extraction system Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, total height: 1,750 mm, total width: 1,850 mm, overall weight: 3,800 kg, product length (max.): 2,850 mm, number of axes: 2, Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details. • 20 kW = real power (mechanical/electrical output) • 27 kVA = apparent power (includes reactive power) • Internal taper: metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Maximum chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal slides: 1 • Number of cross slides: 1 • Center distance: 1100 • Cross travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Feed rate longitudinal: 0.001 – 20 mm/rev • Feed rate cross: 0.001 – 20 mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min • Feed force longitudinal: 10000 N • Feed force cross: 7000 N • Metric thread range: 0.1 – 250 mm • Whitworth thread range: 1/4 – 56 threads/inch • Module range: 0.125 – 28 Nodpoy Em Avefx Afaecr • DP range: 0.05 – 48 • Maximum cutting cross section: 2.25 mm² • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) • Electrical: • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: A small actuator that switches between the gear stages is defective; both gear stages are functioning. Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: used, mileage: 179,000 km, power: 92 kW (125.09 HP), first registration: 04/2015, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales consultant. Attention!!! Sale preferably to commercial customers. Internal ID number: [3132] ---- Optional add-ons: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing possible even without down payment * Spring offer: Upon request and for a surcharge of only €999, increase of towing capacity up to 3,500 kg (subject to vehicle and manufacturer). ---- Vehicle highlights: * 19% VAT deductible * 1 owner * Regularly serviced * German vehicle * Ready for immediate use * High roof + long wheelbase * Air conditioning * Cruise control * Tow bar * Reversing camera Special equipment: Audio system: Radio/CD player with multi-function display, central locking (customized configuration), Visibility Package 1, Seat Package 2: driver seat (4-way adjustable) – front double passenger seat, synthetic leather Additional features: 2nd battery, overhead storage compartment (driver cabin), driver’s airbag, traction control (ASR), exterior mirrors with short mounting arm, integrated indicator in exterior mirrors, on-board computer, roof lining in passenger compartment, rev counter, electronic brake-force distribution (EBD), electronic differential lock (EDS), hill start assist, 150 A alternator, heater with air recirculation, ISOFIX mountings for child seats, body/structure: wide platform, body/structure: standard crew cab platform, steering column (steering wheel) height-/reach-adjustable, headlight range adjustment, engine 2.2 l – 92 kW TDCi CAT, production plant: Otosan, wheelbase 3,954 mm, spare wheel matching vehicle wheels, low-emission according to Stage 5/Euro 5, seats in load/passenger compartment: 1st row, 4-seater bench, steel wheels 6.5x16, front wall height extension (aluminum platform), partially painted bumpers, tinted windows ---- Interested in leasing or financing? We offer attractive deals – even without down payment! Feel free to contact us. Nodpfxoyh Tkus Afajcr Contact: Phone: E-Mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Note: All information on the internet is non-binding and for general vehicle description only. Errors, misprints, and prior sale reserved. The binding condition of the vehicle is defined exclusively in the purchase contract on site or via written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 165,000 km, power: 81 kW (110.13 HP), first registration: 04/2016, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, soot filter, Now chat via WhatsApp: Quick and easy contact with our sales advisor. Ncsdpfx Afjyh Ti Doajr Attention! Sales preferably to business customers. Internal ID number: [3144] ----Optional add-ons: * 12 to 64 months warranty (valid throughout the EU) * New inspection * New MOT & emissions test * Nationwide delivery * Financing also possible with zero down payment * Spring offer: On request and for a surcharge of only €999 – increase of towing capacity up to 3,500 kg (vehicle and manufacturer dependent) ----Vehicle highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Euro 5 emission standard Special equipment: Tow bar, 3-seater, reversing camera, full wheel covers Other features: Driver airbag, electrically adjustable and heated exterior mirrors, outside temperature display, brake assist, rev counter, electronic brakeforce distribution, 150 A alternator, rear wing doors without glazing, cabin filter: pollen filter, body/build: standard panel van, fuel tank: 105 l, partition wall in load compartment, height-adjustable steering column (steering wheel), model update, engine 2.3 l – 81 kW dCi diesel FAP CAT, wheelbase 3182 mm, smoker package, tire repair kit, low emissions according to Euro 5 emissions standard, shift point indicator, sliding side door (right) in loading/passenger compartment, side protection strips, seat covering/upholstery: fabric, cab seats: multifunctional dual passenger seat, cab seats: height-adjustable driver’s seat, passenger-side sun visor with wide-angle mirror, lashing eyes in load compartment floor, heat-insulating glass, permissible gross weight 2.80 t ----Interested in leasing or financing? We offer attractive terms – also available with zero down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information published online is non-binding and provided for general vehicle description only. Errors, typographical mistakes, and prior sale excepted. The binding specification of the vehicle will result exclusively from the purchase contract at site or in writing. Vehicles with mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 192,000 km, power: 92 kW (125.09 HP), first registration: 09/2015, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 7, total length: 6,200 mm, loading space length: 3,000 mm, Equipment: ABS, central locking, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales advisor. Attention !!! Sale preferably to commercial customers only Internal ID number: [ 3125 ] ----Optional add-ons available: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available even with zero down payment * Spring Offer: Upon request and for just €999 extra, the towing capacity can be increased up to 3,500 kg (depending on vehicle and manufacturer specifications). ----Vehicle highlights: * 19% VAT reclaimable * Regularly maintained * German vehicle * Ready for immediate use * Maxi version * Long flatbed * Double cab chassis (DoKa flatbed) * Towbar * Raised side panels Special equipment: Audio system: Radio/CD player with multi-function display, configuration with specific central locking, Visibility Package 1, Seat Package 2: driver’s seat (4-way adjustable) – double passenger bench, synthetic leather Further features: 2nd battery, overhead storage compartment in cab, driver's airbag, traction control (ASR), external mirrors with short support arms, indicator integrated in mirrors, onboard computer, headliner in passenger compartment, rev counter, electronic brake force distribution (EBD), electronic differential lock (EDS), hill-start assist, 150 A alternator, recirculation heating, Isofix child seat fittings, body/chassis: wide flatbed, body/chassis: standard double cab flatbed, steering column (steering wheel) adjustable for height/length, headlight height adjustment, engine: 2.2 Ltr. – 92 kW TDCi CAT, production site: Otosan, wheelbase 3,954 mm, spare wheel with drive tires, low emissions in accordance with Stage 5 / Euro 5, seats in loading/passenger compartment: 1st row, 4-seater bench, steel wheels 6.5x16, front wall heightening for alloy flatbed, semi-painted bumper, tinted windows ----Leasing or financing required? Ncedpsygcdksfx Afasr We offer attractive options – zero down payment possible! Contact us for details. Contact: Telephone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Notice: All details published online are non-binding and for general vehicle description only. Errors, typos, and prior sale excepted. The binding specification of the vehicle results exclusively from the purchase contract at the location or from written confirmations. Vehicles with more than 50,000 km mileage or older than 3 years are preferably sold to our business customers.

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Nodpsy Ehdnjfx Afajcr Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Ncedpfxey Ehdbj Afasr Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A Ncedpfx Asy Edv Hjfaor • External fuse: 80 A • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,981 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,035 mm, spindle motor power: 18,500 W, overall weight: 5,600 kg, controller manufacturer: FANUC, controller model: MSG-501 MAPPS, number of axes: 3, This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details. • Max turning diameter: 260 mm • Max turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Bar capacity: 74 mm • Rapid traverse (X/Z): 18 / 24 m/min • Live tooling (BMC): 3,000 RPM / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) Njdpoy D Rnyofx Afaocr • Turret: 12 station VDI 40 Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 540 mm, spindle motor power: 15,000 W, overall weight: 5,100 kg, controller manufacturer: FANUC, number of axes: 2, Horizontal turning machine manufactured in 2014. This Samsung PL-20M features a maximum machining diameter of 365 mm and a machining length of 480 mm. It is equipped with a spindle speed of up to 4000 rpm and a turret with 10 tool positions. If you are looking to get high-quality turning capabilities, consider the Samsung PL-20M machine we have for sale. Contact us for further details. • Max. machining diameter: 365 mm • Max. machining length: 520 mm • Turret tool positions: 10 Additional equipment • Tailstock Technical Specification Counter Spindle No Driven Tools No Ncsdpfey D I T Hsx Afasr

Condition: used, mileage: 13,410 km, power: 129 kW (175.39 HP), first registration: 05/2024, fuel type: diesel, empty load weight: 3,490 kg, maximum load weight: 4,000 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 5,500 mm, loading space width: 2,480 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, trailer coupling, - Fuso 7C18 with new aluminium flatbed, bed length 5.5m - Chassis and flatbed available on site, delivery time for completed vehicle: 6 weeks - Air conditioning - Automatic transmission (Duonic) - Spare wheel - Wheelbase: 4.3m - Perm. gross weight: 7490kg, payload 4000kg (full aluminium body) Njdpfxeywy Aae Afaocr - Ball-type coupling, reversing camera optionally available - New Aluminium Flatbed Details: - Internal length: 5421 mm - External width: 2550 mm - Internal width: 2480 mm - Anodized base frame with 8 fitted lashing rings per side - Floor drop: 24 mm, floor panels: 24 mm - 11 anodized aluminium crossmembers (80 mm) - 2 reinforced anodized aluminium subframes (130 mm) - Front wall 1400 mm incl. front wall supports - Side walls 500 mm, 5 hinges per sidewall - Drop sides made of 25 mm snap-lock profiles with folding step - Rear wall: Height 500 mm, folding, 3 hinges, with folding step, powder-coated - Stanchions: front fixed, 1400 mm high; middle: folding, K20; rear: folding, 500 mm high, powder-coated - Subject to prior sale and errors! - More details and XXL pictures available on our website. - Features: Air conditioning, climate control, automatic transmission, VAT deductible, ABS, radio, on-board computer, heated mirrors, electric front windows, electronic immobilizer, central locking with remote, tow coupling, power steering, rev counter, differential lock, exterior temperature display, electrically adjustable mirrors, tachograph, spare wheel, cab: local delivery, thermal insulation glazing, crane, single owner, emissions standard: Euro 6, diesel, rear-wheel drive, very good condition, hydraulic system, available for rental, low emission badge: 4 - green.

Condition: used, mileage: 44,142 km, power: 150 kW (203.94 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 4,904 mm, total width: 1,904 mm, total height: 1,970 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Errors and prior sale excepted! Internal number: 1005. X017544 ----EQUIPMENT * Double cab with 3 seats in the 2nd row * 19-inch alloy wheels * Fixed tow bar with trailer stability control * Battery/generator capacities: standard battery and higher-capacity generator * Gross vehicle weight: Permissible gross weight 3.2 t – Permissible total weight 3,200 kg – Suspension and dampers for vehicles with 3.2 t permissible total weight – Center wheel arch cover – Reinforced on-board tools and jack for vehicles with 3.2 t permissible gross weight * Glove compartment with lighting * Rear wing doors without windows – Rear wing doors without window cutouts – Rear wing door lock with internal release function – Without rear window – Without interior safety mirror * Rear wing door lock with internal release function * Partition walls: high partition without window, plus 8 tie-down eyes for cargo securing – High partition – No child safety lock in passenger compartment – Reinforced tie-down eyes for cargo securing (ISO 27956) * Seat configuration – 3. seat adjustments: Height adjustment for left single seat in driver’s cab * Air conditioning in driver’s cab, electronically controlled * Seat configuration – 3. seat adjustments: Height adjustment for left and right single seat in driver’s cab * Seat configuration – 3. seat adjustments: Height adjustment for right single seat in driver’s cab * Seat configuration – 4. lumbar supports: Manually adjustable lumbar support for left driver’s cab seat * Seat configuration – 4. lumbar supports: Manually adjustable lumbar support, left and right, for single seats * Lighting and visibility – Automatically dimming interior safety mirror – Daytime running lights with automatic headlight control, "Leaving home" function and manual "Coming home" function – Windscreen wiper interval control with rain sensor for front wipers * Differential lock – Mechanical rear axle differential lock Ncsdpfoxrxa Dsx Afaer * Steering wheel: 3-spoke multifunction leather steering wheel * Multifunction display: Digital cockpit and fatigue detection * Radio navigation system “Discover Media” including “Streaming & Internet” – Voice control – 2 USB interfaces (Type C) in dashboard – Radio navigation system “Discover Media” with 20.3 cm (8 inches) touchscreen, incl. streaming and internet – Navigation functionality/preparation – 4 speakers: 2 tweeters, 2 woofers – Wired & wireless App-Connect * Fog lights incl. cornering lights * Note: Without child safety lock in passenger compartment * ParkPilot front and rear * ParkPilot rear * Tire pressure monitoring indicator * Driver assistance systems: Rear view camera “Rear View” (static guidelines) * Reinforced tie-down eyes for cargo securing (ISO 27956) * Auxiliary heaters: Water auxiliary heater with programmable parking heater function * Auxiliary heaters: Water auxiliary heater with programmable parking heater function with remote control * 2 broadband loudspeakers * Airbag for driver and passenger * Permanent all-wheel drive 4MOTION * Exterior mirrors electrically adjustable and heated * Exterior mirrors, left and right convex * Hill start assist * Third brake light * Green tinted windows * Rev counter * Three-point automatic safety belts * ESP Electronic Stability Program * Chassis: 17" chassis and brake system * Electric windows (2) * Fresh air system with multi-stage fan * Transmission: 7-speed DSG automatic