BOEHRINGER VDF 315 CM

VDF Boehringer VDF 315 CM

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 rapid traverse 10 m/min Working speed 0,1 - 10.000 mm/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe Lrsdpfx Abovy Ig Te Aeu VDF BOEHRINGER - VDF 315 Cm / DL 2000

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC Lsdpfx Absuhauys Aoru - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor - Parts catcher with conveyor in position 6

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm Lredpfx Absz Hmwkj Aeu rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Must move in short time

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min Lrodpfxjwwaruo Ab Aeu diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Cutting tools not come. Lsdpfx Aorpk Rmob Aoru

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm The minimum distance between the axes of the sets - 1500 mm Lrodsmidwcjpfx Ab Asu Maximum axle clamping on the rails - 25 tons Rotation of drive rollers (stepless) - 15-82 rpm Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Sliding rail travel - 9000 mm/min Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Year of construction: 2000, condition: good (used), Parts shown by hand not included. Ledpfxepy Eqme Ab Ajru 1350 mm length, D 480 mm,

Condition: good (used), spindle bore: 360 mm, travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, spindle motor power: 45,000 W, rotational speed (max.): 500 rpm, total height: 2,100 mm, total length: 8,100 mm, total width: 2,750 mm, overall weight: 13,000 kg, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Lrsdpewxb Erofx Ab Asu Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly Lodeytrxkopfx Ab Asru - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 250 [mm] - Spindle speeds : 7000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7000 [rpm] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 5000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 END ATTACHMENT - Number of positions : 5 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2150x1500 [mm] - Machine height : 1800 [mm] - Machine weight : 2800 [kg] MACHINE HOURS Lrsdpfjyhrlyox Ab Aju - Number of working hours : 23884 [h] EQUIPMENT - CNC : Fanuc - 3 colors status lamp - Parts catcher - Ejection of workpiece - Coolant tank - Hydraulic bar-push brand/type : IEMCA BOSS 332